B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LUTIAN DIESEL WATER PUMPS - 80KB-3



The LUTIAN 80KB-3 is a heavy-duty 3-inch diesel water pump designed for high-volume water transfer, agricultural irrigation, plantation use, construction-site dewatering, drainage, garden watering, and general water-supply applications. Powered by a 296cc LUTIAN LT178F single-cylinder, 4-stroke, air-cooled diesel engine, the 80KB-3 provides a practical combination of high water-flow capacity, reliable diesel power, and portable construction for demanding outdoor pumping work.

The pump features 3-inch suction and discharge ports and is specified with a maximum flow rate of approximately 920 litres per minute, equivalent to about 55.2m³/h in the current Malaysian product listing. Other LUTIAN catalogue specifications list the 80KB-3 at approximately 36m³/h, indicating that published performance figures vary between product versions or test specifications. For catalog purposes, the local distributor specification of 920 L/min should be treated as the applicable figure for that supplied version.

The 80KB-3 provides a maximum head of 30m according to the current product listing, while LUTIAN catalogue documentation specifies a pump lift of 28m. It also provides a maximum suction head of 7m. Actual water output depends on suction height, discharge elevation, hose or pipe length, pipe diameter, fittings, water source, and overall system resistance.

The pump is powered by the LUTIAN LT178F diesel engine. This single-cylinder, 4-stroke, air-cooled engine has a 296cc displacement and a rated output of approximately 3.8kW / 5.2HP. The engine operates at 3,600 RPM in the current local specification, while LUTIAN catalogue documentation lists 3,000 RPM for the 80KB-3, so the exact rated speed should be confirmed against the specific engine supplied.

The pump assembly is designed for durability and practical field operation. LUTIAN documentation describes the diesel water pump series as using cast-iron impellers and inner casings with an aluminium die-cast pumping casing. The 80KB-3 product listing further specifies a forged/light aluminium-alloy construction, forged-iron volute impeller, and a high-quality mechanical water-sealing system. These components are designed to withstand regular water-pumping loads while keeping the pump relatively portable.

The self-priming design allows the pump to continue normal pumping operation after the initial priming process. LUTIAN's product catalogue specifically describes the diesel water pump series as self-priming, meaning that water does not need to be repeatedly added for subsequent pumping operations once the pump has been initially primed.

With dimensions of approximately 565 × 455 × 560mm and a net weight of around 45kg in the current local specification, the 80KB-3 remains practical for transportation between different work areas. The diesel-powered configuration makes it particularly useful for remote farms, plantations, construction sites, drainage areas, and outdoor locations where mains electricity is unavailable or impractical.

KEY FEATURES:
• 3-inch heavy-duty diesel water pump
• 3" suction and 3" discharge connections
• LUTIAN LT178F diesel engine
• 296cc single-cylinder diesel engine
• 5.2HP / 3.8kW rated engine output
• 4-stroke, air-cooled diesel engine
• Maximum flow rate up to 920 L/min on current local specification
• Approximately 55.2m³/h equivalent maximum flow rate
• Maximum head up to 30m on current local specification
• 28m pump lift specified in LUTIAN catalogue documentation
• Maximum suction head of 7m
• Self-priming pump design
• Durable aluminium-alloy pump casing
• Forged/cast-iron volute impeller
• Mechanical water seal for improved water resistance
• Low oil consumption design
• Low-noise diesel engine operation
• Compact and portable construction
• Suitable for agricultural and industrial water transfer
• Independent operation without electrical power

TECHNICAL SPECIFICATIONS:
Brand: LUTIAN
Model: 80KB-3
Product Type: Diesel Water Pump
Pump Type: Self-Priming Centrifugal Water Pump
Fuel Type: Diesel
Engine Model: LT178F
Engine Type: Single-Cylinder, 4-Stroke, Air-Cooled Diesel Engine
Displacement: 296cc
Rated Output: 3.8kW / 5.2HP
Rated Speed: 3,600 RPM according to current local specification
Suction Port: 3"
Discharge Port: 3"
Maximum Flow Rate: 920 L/min according to current local specification
Maximum Capacity: Approximately 55.2m³/h equivalent
Maximum Head: 30m according to current local specification
Pump Lift: 28m according to LUTIAN catalogue specification
Maximum Suction Head: 7m
Net Weight: Approximately 45kg
Dimensions: Approximately 565 × 455 × 560mm

PUMP CONSTRUCTION:

The LUTIAN 80KB-3 is constructed for demanding water-transfer applications. Its aluminium-alloy pump casing provides a balance between strength and manageable weight, while the forged/cast-iron volute impeller is designed to handle regular pumping loads. The mechanical water seal helps prevent water from passing through the pump shaft area and contributes to reliable operation.

The 3-inch inlet and outlet configuration allows the pump to handle substantially greater water volume than smaller 2-inch models. This makes the 80KB-3 particularly suitable where fast drainage and high-volume water transfer are required.

DIESEL ENGINE PERFORMANCE:

The LT178F engine uses a single-cylinder, 4-stroke, air-cooled diesel configuration with 296cc displacement and approximately 5.2HP rated output. The air-cooled design eliminates the requirement for a radiator and coolant system, simplifying routine maintenance and making the pump practical for outdoor operation.

The diesel engine provides an independent power source, allowing the pump to operate at locations without access to mains electricity. This is useful for farms, plantations, construction areas, drainage locations, rural properties, and emergency water-removal work.

WATER PUMP PERFORMANCE:

The 80KB-3 is designed for high-volume water transfer. Its 3-inch ports provide a large water passage, while the diesel engine supplies the mechanical power required for demanding pumping applications. The current local specification lists a maximum flow of 920 L/min and maximum head of 30m. LUTIAN's catalogue lists 36m³/h and 28m pump lift for the model, demonstrating that performance figures can vary depending on specification or test conditions.

The maximum suction head is specified at 7m. For optimum suction performance, the suction hose should be properly connected, appropriately sized, free from air leakage, and equipped with a suitable strainer. Excessive suction height, long suction hoses, restrictions, bends, or clogged strainers can reduce actual water flow.

APPLICATIONS:

The LUTIAN 80KB-3 is suitable for a wide range of water-pumping applications, including:

• Agricultural irrigation
• Plantation irrigation
• Farm water transfer
• Garden and landscape watering
• Pond drainage
• Tank filling and water transfer
• Floodwater removal
• Construction-site dewatering
• Excavation drainage
• Rural water supply
• General outdoor water pumping
• Industrial water transfer
• Emergency drainage applications

AGRICULTURAL AND IRRIGATION USE:

The high-volume 3-inch configuration makes the 80KB-3 suitable for agricultural operations requiring substantial water movement. It can be used to transfer water from ponds, tanks, canals, reservoirs, collection areas, and other suitable water sources for irrigation and general farm water management.

For irrigation installations, the actual delivered flow will depend on the pipe diameter, total pipe length, elevation difference, fittings, valves, and required discharge pressure. The published maximum flow figure represents pump performance under specified test conditions rather than a guaranteed flow rate at every installation.

CONSTRUCTION AND DRAINAGE USE:

The independent diesel engine makes the 80KB-3 suitable for construction and drainage applications where electrical supply may not be available. The 3-inch discharge allows substantial quantities of water to be removed from work areas, trenches, excavation zones, ponds, and other locations requiring drainage.

PORTABILITY AND FIELD OPERATION:

At approximately 45kg with dimensions around 565 × 455 × 560mm, the 80KB-3 is designed to remain transportable while providing the higher pumping capacity associated with a 3-inch pump. Its compact configuration makes it suitable for moving between farms, construction areas, plantations, and other outdoor work locations.

ACCESSORIES INCLUDED:

The current Malaysian product listing specifies the following accessories:

• 3-inch PVC coupling × 2
• PVC strainer
• Hose clips × 2

MAINTENANCE:

For reliable long-term operation, check the diesel engine oil level before starting and perform regular oil changes according to the manufacturer's recommended maintenance schedule. Keep the air filter clean, inspect the fuel system, and check the suction and discharge connections regularly.

The suction strainer should be cleaned frequently to prevent blockage and maintain proper water flow. Hoses should be checked for cracks, loose connections, or air leaks. The pump should be correctly primed before initial operation, and the engine should be operated according to the manufacturer's instructions.

IMPORTANT OPERATING CONSIDERATIONS:

The pump should only be used with suitable clean or appropriately filtered water unless the specific pump configuration is designed for other liquids. Keep the suction line airtight and ensure that the suction strainer remains submerged during operation. Do not operate the pump without adequate priming or allow the engine to run without sufficient lubrication.

PRODUCT SUMMARY:

The LUTIAN 80KB-3 3" Diesel Water Pump is a high-capacity diesel-powered water pump equipped with a 296cc LT178F engine producing approximately 5.2HP. With 3-inch suction and discharge ports, up to 920 L/min maximum flow in the current local specification, up to 30m maximum head, and 7m maximum suction head, it is designed for demanding agricultural, irrigation, drainage, construction, plantation, and general water-transfer applications. Its self-priming design, air-cooled diesel engine, durable pump construction, and independent fuel-powered operation make it a practical solution for high-volume outdoor water pumping.

SPECIFICATION NOTE:

Published 80KB-3 specifications differ across LUTIAN documentation and distributors, particularly for maximum flow, pump lift/head, rated engine speed, dimensions, and weight. The Malaysian distributor currently lists 920 L/min, 30m maximum head, 3,600 RPM, and approximately 45kg, while LUTIAN catalogue documentation lists 36m³/h, 28m pump lift, 3,000 RPM, and 45kg. The exact specification should therefore be matched to the physical unit and local supplier documentation before purchase or installation.



 Inquiry - LUTIAN DIESEL WATER PUMPS - 80KB-3