The LUTIAN LT65-55 is a heavy-duty diesel-powered water pump designed for agricultural irrigation, garden watering, water transfer, drainage, and general outdoor water-supply applications. It is powered by a single-cylinder, 4-stroke, air-cooled LT170FD diesel engine with 211cc displacement and 3.4HP rated output. The pump combines a compact portable design with a large-volume water transfer capability, making it suitable for farms, plantations, gardens, rural properties, and other locations where an independent diesel-powered water pump is required.
The LT65-55 features a 2.5-inch suction/inlet connection and a 2-inch discharge outlet. This 2.5" × 2" configuration is designed to provide substantial water flow while maintaining a relatively compact pump size. The current Malaysian specification lists a maximum flow rate of up to 1,250 L/min, with a maximum head of 22m and maximum suction head of 7m. LUTIAN's broader product documentation lists a maximum capacity of 75m³/h for the LT65-55, equivalent to 1,250 L/min.
The LT170FD diesel engine uses a single-cylinder, 4-stroke, air-cooled configuration and is rated at 2.5kW / 3.4HP. The engine operates at approximately 3,000 RPM according to LUTIAN's product documentation, while some Malaysian listings state 3,600 RPM. The exact engine speed should therefore be confirmed against the specific unit supplied.
The pump is constructed with a forged lightweight aluminium-alloy body designed to provide strength while keeping the overall equipment weight manageable. It incorporates a forged-iron volute impeller and a high-quality water-sealing system using ceramic and silicon-carbide sealing components. These components are intended to provide dependable water sealing and durability during regular pumping operation.
The LT65-55 uses a self-priming pump design. After the initial priming procedure has been completed correctly, the pump is designed to establish water flow without requiring repeated manual filling under normal operating conditions. This makes it practical for irrigation, drainage, and water-transfer applications where the pump may be started and stopped regularly.
With a maximum capacity of approximately 75m³/h, the LT65-55 is designed for high-volume water movement despite its relatively compact dimensions of approximately 535 × 420 × 510mm. The net weight is approximately 41kg, allowing the pump to be transported between different work areas when appropriate handling equipment or sufficient manpower is available.
KEY FEATURES:
• Heavy-duty diesel water pump
• 2.5" suction/inlet × 2" discharge/outlet
• LUTIAN LT170FD diesel engine
• 211cc engine displacement
• 3.4HP / 2.5kW rated engine output
• Single-cylinder, 4-stroke, air-cooled diesel engine
• Self-priming pump design
• Maximum flow rate up to 1,250 L/min
• Maximum capacity approximately 75m³/h
• Maximum pump head of 22m
• Maximum suction head of 7m
• Forged lightweight aluminium-alloy pump construction
• Forged-iron volute impeller
• Ceramic and silicon-carbide water-sealing system
• Low oil-consumption design
• Low-noise engine operation
• Compact and portable construction
• Independent operation without mains electricity
• Suitable for agricultural and general water-transfer applications
TECHNICAL SPECIFICATIONS:
Brand: LUTIAN
Model: LT65-55
Product Type: Diesel Water Pump
Pump Type: Self-Priming Water Pump
Suction / Inlet Port: 2.5"
Discharge / Outlet Port: 2"
Engine Model: LT170FD
Engine Type: Single-Cylinder, 4-Stroke, Air-Cooled Diesel Engine
Fuel Type: Diesel
Displacement: 211cc
Rated Output: 2.5kW / 3.4HP
Rated Speed: 3,000 RPM according to LUTIAN documentation
Maximum Flow Rate: 1,250 L/min
Maximum Capacity: 75m³/h
Maximum Pump Head: 22m
Maximum Suction Head: 7m
Net Weight: Approximately 41kg
Dimensions: Approximately 535 × 420 × 510mm
PUMP CONSTRUCTION:
The LT65-55 is designed with a lightweight aluminium-alloy pump body for a balance of durability and portability. The forged-iron volute impeller is designed to handle the mechanical loads associated with high-volume water transfer, while the ceramic and silicon-carbide water seal helps reduce the possibility of leakage around the rotating shaft assembly.
The combination of a durable impeller and lightweight pump housing makes the LT65-55 suitable for users who require substantial pumping capacity without moving to a much larger and heavier pump assembly.
DIESEL ENGINE PERFORMANCE:
The LUTIAN LT170FD is a 211cc single-cylinder diesel engine producing approximately 3.4HP / 2.5kW. Its 4-stroke air-cooled configuration provides a straightforward power source without the need for a radiator or liquid-cooling system. This simplifies the overall engine design and makes it practical for outdoor agricultural and water-pumping applications.
The diesel-powered configuration allows the LT65-55 to operate independently of mains electricity. This is particularly useful for farms, plantations, construction areas, gardens, rural properties, and other outdoor locations where electrical power may be unavailable or inconvenient.
WATER PUMP PERFORMANCE:
The LT65-55 is designed for high-volume water transfer, with a published maximum capacity of 75m³/h or approximately 1,250 L/min. Its 22m maximum pump head provides capability for transferring water to elevated locations, while the 7m maximum suction head allows the pump to draw water from a suitable source below pump level.
The maximum flow rate and maximum head should not be considered simultaneous operating values. As with centrifugal water-pumping systems, actual flow decreases as total system head and resistance increase. Pipe diameter, pipe length, elevation, valves, bends, fittings, suction height, and water conditions all influence actual pump performance.
SELF-PRIMING DESIGN:
The LT65-55 is designed as a self-priming water pump. Correct initial priming is still required before operation. The suction line should be properly sealed to prevent air leakage, and the suction hose should remain appropriately positioned in the water source.
A properly installed suction system helps the pump establish and maintain water flow efficiently. Air leaks, excessive suction height, restricted hoses, or a blocked strainer can significantly reduce pumping performance.
APPLICATIONS:
The LUTIAN LT65-55 is suitable for:
• Agricultural irrigation
• Plantation irrigation
• Farm water transfer
• Garden watering
• Landscape irrigation
• Pond drainage
• Tank filling
• Reservoir water transfer
• Canal water transfer
• General drainage
• Rural water supply
• Construction-site water transfer
• Outdoor water pumping
• Emergency water removal
AGRICULTURAL IRRIGATION:
The LT65-55 is well suited for agricultural and plantation applications where water needs to be transferred from ponds, tanks, canals, reservoirs, or other suitable water sources. Its diesel engine allows the pump to operate in remote agricultural areas without requiring an electrical connection.
The 2.5-inch suction inlet and 2-inch discharge outlet provide a practical configuration for irrigation and general water-transfer systems. Actual irrigation flow depends on the connected piping network and required discharge pressure.
DRAINAGE AND WATER TRANSFER:
The high-volume pumping capability makes the LT65-55 useful for drainage and water-transfer applications. It can be used for removing standing water, transferring water between tanks or ponds, and supplying water to agricultural areas.
For construction or drainage applications, the pump should be installed on a stable and suitable surface, with the suction strainer kept clear of mud, debris, leaves, and other material that could restrict water intake.
PORTABILITY:
The LT65-55 measures approximately 535 × 420 × 510mm and weighs approximately 41kg. Its relatively compact footprint makes it practical for moving between different work areas compared with larger high-capacity diesel pumps.
The pump's independent diesel engine also means that no electrical power cable is required during operation, making transportation and deployment practical for outdoor applications.
ACCESSORIES INCLUDED:
The current Malaysian product listing specifies:
• 2-inch PVC coupling × 2
• PVC strainer
• Hose clips × 2
MAINTENANCE:
For reliable operation, check the diesel engine oil level before starting and perform regular oil changes according to the manufacturer's recommended service schedule. The air filter should be inspected and cleaned regularly, while the diesel fuel system should be kept clean.
The suction hose, discharge hose, couplings, clamps, and strainer should be inspected regularly for leaks, cracks, blockages, and damage. The PVC strainer should be cleaned frequently to prevent debris from restricting water flow.
The pump should be correctly primed before operation and should not be allowed to operate without sufficient water in the pump chamber. Routine inspection of the mechanical water seal and impeller is also recommended as part of long-term pump maintenance.
IMPORTANT OPERATING CONSIDERATIONS:
The maximum 75m³/h capacity represents the published maximum pump capacity under specified test conditions. Actual flow at the job site will depend on the complete pumping system. Long hoses, small-diameter pipes, high elevation, restrictive fittings, clogged strainers, and excessive suction height can reduce actual water output.
For optimum performance, use correctly sized suction and discharge hoses, minimize unnecessary bends and restrictions, maintain airtight suction connections, and keep the suction strainer submerged and free from debris.
WHY CHOOSE LUTIAN LT65-55:
The LUTIAN LT65-55 combines a compact 211cc diesel engine with a high-capacity self-priming water pump. Its 3.4HP LT170FD engine, 2.5" × 2" port configuration, 22m maximum head, 7m maximum suction head, and published 75m³/h maximum capacity make it suitable for users requiring substantial water-transfer performance from a portable diesel-powered unit.
PRODUCT SUMMARY:
The LUTIAN LT65-55 Diesel Water Pump is a 2.5" × 2" self-priming diesel water pump powered by a 211cc LT170FD single-cylinder, 4-stroke, air-cooled diesel engine. Producing approximately 3.4HP / 2.5kW, it delivers a published maximum capacity of 75m³/h or 1,250 L/min, with a maximum pump head of 22m and maximum suction head of 7m. Its lightweight aluminium-alloy construction, forged-iron volute impeller, high-quality water-sealing system, and independent diesel operation make it suitable for agricultural irrigation, plantation work, drainage, garden watering, rural water transfer, and general outdoor pumping applications.
SPECIFICATION NOTE:
There is a minor discrepancy between current distributor and manufacturer listings for the LT65-55 engine speed. The Malaysian product listing identifies the LT170FD engine at 3,600 RPM, while LUTIAN's technical documentation lists 3,000 RPM. The manufacturer documentation also lists the LT65-55 at 75m³/h, 22m head, 7m suction head, 41kg, and 535 × 420 × 510mm. For a product catalog, the exact engine specification should be matched to the physical unit and supplier documentation supplied with the pump.
Inquiry - LUTIAN DIESEL WATER PUMPS - LT65-55