The LUTIAN LT80-65 is a heavy-duty diesel-powered water pump designed for high-volume water transfer, agricultural irrigation, plantation work, garden watering, drainage, construction-site dewatering, and general outdoor water-supply applications. Powered by a 296cc LUTIAN LT178F single-cylinder, 4-stroke, air-cooled diesel engine, the LT80-65 combines strong pumping performance with a practical portable design for demanding field applications. Current Malaysian listings specify a 4kW / 5.2HP engine, 30m maximum pump lift, 7m maximum suction head, and a maximum flow of approximately 42m³/h.
The pump features a 3-inch discharge port and 2½-inch suction/inlet port. This 3" × 2½" configuration provides a high-volume water-transfer capability while maintaining a relatively compact pump assembly. The published maximum capacity is 42m³/h, equivalent to approximately 700 L/min. A Malaysian product listing also specifies the maximum flow rate directly as 700 L/min.
The LT80-65 provides a maximum pump lift/head of 30m and a maximum suction head of 7m according to current product specifications. These are maximum rated values; actual water flow at the installation will depend on suction height, discharge elevation, pipe diameter, pipe length, bends, valves, fittings, and other hydraulic resistance.
Power is supplied by the LUTIAN LT178F diesel engine, a single-cylinder, 4-stroke, air-cooled diesel engine with 296cc displacement and a rated output of 4kW / 5.2HP. The current Malaysian specifications list a rated speed of 3,600 RPM. Older LUTIAN documentation for the LT80-65 lists the same 296cc LT178F engine and 5.2HP output but specifies 3,000 RPM, so the exact engine speed should be confirmed against the unit supplied.
The pump uses a durable lightweight aluminium-alloy construction together with a forged-iron volute impeller. It also incorporates a high-quality ceramic and silicon-carbide water-sealing system. These components are intended to provide reliable water sealing, durability, and practical service life under regular pumping conditions.
The LT80-65 is a self-priming water pump. After the initial priming procedure has been completed correctly, the pump is designed to establish water flow without requiring repeated manual filling during normal subsequent operation. This makes it suitable for irrigation and drainage applications where the pump may be started and stopped regularly.
With dimensions of approximately 565 × 466 × 560mm and a net weight of approximately 47kg, the LT80-65 provides a useful balance between pumping capacity and portability. Its diesel-powered configuration allows operation without mains electricity, making it suitable for farms, plantations, construction sites, rural properties, gardens, drainage areas, and other outdoor locations.
KEY FEATURES:
• Heavy-duty diesel water pump
• 3" discharge × 2½" suction/inlet configuration
• LUTIAN LT178F diesel engine
• 296cc single-cylinder diesel engine
• 5.2HP / 4kW rated output
• 4-stroke, air-cooled diesel engine
• 3,600 RPM current local specification
• Maximum water capacity of approximately 42m³/h
• Maximum flow rate of approximately 700 L/min
• Maximum pump lift/head of 30m
• Maximum suction head of 7m
• Self-priming pump design
• Lightweight and strong aluminium-alloy construction
• Forged-iron volute impeller
• Ceramic and silicon-carbide water-sealing system
• Low oil-consumption design
• Low-noise engine operation
• Independent operation without mains electricity
• Suitable for agriculture, irrigation, drainage, and water transfer
• Compact and portable construction
TECHNICAL SPECIFICATIONS:
Brand: LUTIAN
Model: LT80-65
Product Type: Diesel Water Pump
Pump Type: Self-Priming Water Pump
Fuel Type: Diesel
Suction / Inlet Port: 2½"
Discharge Port: 3"
Engine Model: LT178F
Engine Type: Single-Cylinder, 4-Stroke, Air-Cooled Diesel Engine
Displacement: 296cc
Rated Output: 4kW / 5.2HP
Rated Speed: 3,600 RPM according to current Malaysian specification
Maximum Capacity: 42m³/h
Maximum Flow Rate: 700 L/min
Maximum Pump Lift / Head: 30m
Maximum Suction Head: 7m
Net Weight: Approximately 47kg
Dimensions: Approximately 565 × 466 × 560mm
PUMP CONSTRUCTION:
The LT80-65 is designed for regular agricultural and outdoor pumping work. Its lightweight aluminium-alloy pump body provides structural strength while keeping the equipment manageable for transportation. The forged-iron volute impeller is designed to withstand the mechanical loads associated with high-volume water transfer. The ceramic and silicon-carbide water seal provides additional resistance against water leakage around the pump shaft.
The 3-inch discharge outlet allows the pump to move a relatively large volume of water, while the 2½-inch suction connection provides suitable water intake capacity for the pump's rated output.
DIESEL ENGINE PERFORMANCE:
The LT178F engine is a 296cc single-cylinder, 4-stroke, air-cooled diesel engine producing approximately 5.2HP / 4kW. Its air-cooled configuration eliminates the need for a radiator and coolant system, simplifying the overall engine design and routine maintenance requirements.
The diesel engine provides an independent power source, allowing the LT80-65 to operate in areas where electrical power is unavailable or inconvenient. This is particularly useful for farms, plantations, construction sites, rural properties, gardens, and temporary drainage locations.
WATER PUMP PERFORMANCE:
The LT80-65 is designed for high-volume water movement, with a published maximum capacity of 42m³/h or approximately 700 L/min. Its 30m maximum pump lift allows water to be transferred to elevated locations, while the 7m maximum suction head provides practical suction capability when the water source is below the pump.
The maximum flow and maximum head are not normally achieved simultaneously. As with centrifugal pumping systems, actual flow decreases as total system head and resistance increase. Pipe diameter, total pipe length, elevation, valves, bends, fittings, suction height, and water conditions will all affect the final delivered flow.
SELF-PRIMING DESIGN:
The LT80-65 incorporates a self-priming design intended to simplify repeated pumping operations. Correct initial priming is still required before the pump is operated. The suction line should be airtight, correctly connected, and properly positioned in the water source.
Air entering the suction line can prevent the pump from establishing proper suction and may substantially reduce water flow. The suction strainer should also remain submerged and free from mud, leaves, stones, and other debris.
APPLICATIONS:
The LUTIAN LT80-65 is suitable for a wide range of water-pumping applications, including:
• Agricultural irrigation
• Plantation irrigation
• Farm water transfer
• Garden watering
• Landscape irrigation
• Pond drainage
• Tank filling
• Reservoir water transfer
• Canal water transfer
• Construction-site dewatering
• Excavation drainage
• Floodwater removal
• Rural water supply
• General outdoor water transfer
• Industrial and commercial water transfer
AGRICULTURAL AND IRRIGATION APPLICATIONS:
The LT80-65 is suitable for farms and plantations that require substantial quantities of water to be transferred between ponds, tanks, canals, reservoirs, and irrigation areas. Its independent diesel engine allows the pump to operate without a mains electricity connection, making it practical for remote agricultural locations.
The 3" × 2½" port configuration provides a high-volume pumping arrangement suitable for irrigation systems where significant water movement is required. Actual irrigation performance will depend on the connected pipework and required discharge pressure.
DRAINAGE AND DEWATERING:
The high-flow design makes the LT80-65 suitable for drainage applications involving standing water, ponds, tanks, trenches, excavations, and other areas requiring water removal. The 3-inch discharge connection provides a large water passage for efficient water transfer.
For construction-site applications, the pump should be positioned on a stable surface and protected from excessive mud, debris, and conditions that could obstruct the suction system.
PORTABILITY:
The LT80-65 measures approximately 565 × 466 × 560mm and weighs approximately 47kg. This provides a practical compromise between high pumping capacity and portability.
The diesel engine eliminates the need for an electrical power cable during operation, which is particularly useful when the pump must be transported between different outdoor work locations.
ACCESSORIES INCLUDED:
The current Malaysian product listing specifies:
• 3-inch PVC coupling × 2
• PVC strainer
• Hose clips × 2
MAINTENANCE:
For dependable long-term operation, check the diesel engine oil level before every start and follow the manufacturer's recommended oil-change schedule. Inspect and clean the air filter regularly, and keep the diesel fuel system clean.
Inspect the suction hose, discharge hose, couplings, clamps, and strainer for leaks, cracks, blockages, or other damage. The suction strainer should be cleaned regularly to maintain unrestricted water intake.
The pump should be correctly primed before initial operation and should not be operated without sufficient water in the pump chamber. Periodic inspection of the impeller and mechanical water seal is also recommended as part of normal maintenance.
IMPORTANT OPERATING CONSIDERATIONS:
The published 42m³/h maximum capacity represents the maximum pump capacity under specified test conditions. Actual flow at the job site can be lower depending on the complete hydraulic system.
Long suction hoses, small-diameter discharge pipes, high elevation, excessive bends, restrictive fittings, clogged strainers, and air leaks can reduce pump performance. For optimum results, use correctly sized hoses and pipes, keep the suction line airtight, minimize unnecessary restrictions, and maintain a clean suction strainer.
WHY CHOOSE LUTIAN LT80-65:
The LUTIAN LT80-65 combines a 296cc diesel engine with a high-flow self-priming pump in a relatively compact package. Its 5.2HP LT178F engine, 3" × 2½" port configuration, 42m³/h maximum capacity, 30m maximum head, and 7m maximum suction head make it suitable for users requiring substantial water-transfer performance for agricultural, plantation, drainage, and general outdoor applications.
PRODUCT SUMMARY:
The LUTIAN LT80-65 Diesel Water Pump is a 3" × 2½" self-priming diesel water pump powered by a 296cc LT178F single-cylinder, 4-stroke, air-cooled diesel engine. Producing approximately 5.2HP / 4kW, it provides a published maximum capacity of 42m³/h or approximately 700 L/min, with a maximum pump lift of 30m and maximum suction head of 7m. Its aluminium-alloy pump construction, forged-iron volute impeller, ceramic and silicon-carbide water-sealing system, and independent diesel operation make it suitable for agricultural irrigation, plantation work, drainage, garden watering, construction dewatering, and general water-transfer applications.
SPECIFICATION NOTE:
Current Malaysian listings specify 700 L/min, 30m head, 7m suction head, 296cc displacement, 4kW / 5.2HP output, 3,600 RPM, and approximately 47kg. LUTIAN's published technical data for the LT80-65 gives 42m³/h capacity, 30m pump lift, 7.5m maximum suction head, 47kg net weight, 560 × 455 × 560mm dimensions, and 3,600 RPM. Older catalogue material may show slightly different dimensions or suction specifications. For a website catalog, the current Malaysian specification is appropriate, while the exact specification should be confirmed against the physical unit and supplier documentation.
Inquiry - LUTIAN DIESEL WATER PUMPS - LT80-65