The LUTIAN 178F20H Diesel Water Pump is a high-head, diesel-powered water pumping solution designed for applications that require strong water pressure and reliable water transfer over longer vertical distances. Powered by a single-cylinder, 4-stroke air-cooled LT178F diesel engine, this pump delivers 4kW / 5.2HP of rated output from a 296cc engine operating at 3600 RPM. With a 2" × 2" suction and discharge connection, a maximum flow rate of approximately 30 m³/h (500 L/min), and a maximum pump lift of 65 metres, it is well suited for agricultural irrigation, water transfer, garden applications, construction sites and general water-supply duties.
High-Head Water Pump Performance
Unlike standard high-volume water pumps that are primarily designed to move large quantities of water over relatively short distances, the LUTIAN 178F20H is designed around high-head performance. Its maximum pump lift of 65 metres makes it suitable for transferring water to elevated locations, through longer pipe runs or through systems where higher discharge pressure is required. The pump can deliver up to approximately 30 m³/h, equivalent to 500 litres per minute, depending on operating conditions, piping configuration and pumping head.
The 2-inch suction and discharge ports provide a practical balance between flow capacity and pressure performance. This configuration is suitable for many agricultural, construction, drainage and water-transfer applications where a compact high-head pump is required.
Reliable LUTIAN LT178F Diesel Engine
The pump is powered by a LUTIAN LT178F single-cylinder, 4-stroke air-cooled diesel engine with 296cc displacement and a rated output of 4kW / 5.2HP. The engine operates at a rated speed of 3600 RPM, providing the power required to maintain high-head pumping performance.
The 4-stroke diesel configuration provides a practical power source for locations where electrical power may not be readily available. The engine uses an air-cooled design and is described as incorporating an advanced OHV configuration, with emphasis on reliable operation and easy starting.
Durable Pump Construction
The LUTIAN 178F20H incorporates a robust pump assembly designed for demanding water-transfer work. Product information specifies an aluminium-alloy pump casing, together with a forged iron volute impeller and water-sealing components designed to support reliable pumping operation. The mechanical sealing arrangement helps protect the pump assembly from water leakage during operation.
The aluminium construction helps keep the overall machine relatively manageable for a diesel-powered high-head pump, while the heavier-duty internal pump components are designed to withstand continuous water-pumping loads.
Self-Priming Design
The LUTIAN 178F20H is designed as a self-priming water pump, making it suitable for applications where the pump needs to establish water flow without requiring repeated manual priming during normal operation. LUTIAN diesel pump literature describes the series as self-priming, with water required for the initial priming operation but not normally required again for subsequent pumping once the pump has been properly primed.
Before starting operation, the pump should be correctly primed according to the manufacturer's operating procedure. The suction hose, strainer, couplings and connections should also be properly installed and sealed to prevent air leakage that could affect suction performance.
High-Head Applications
With a maximum pump lift of 65 metres, the 178F20H is particularly suitable for applications where water must be moved upward or against greater system resistance. It can be used for:
- Agricultural irrigation and farm water transfer
- Water transfer to elevated tanks and storage systems
- Garden and landscaping irrigation
- Construction-site water supply
- General water transfer
- Drainage and water removal applications
- Long-distance water transfer through suitable pipework
- Rural and remote water-supply applications
- High-head pumping where electrical power is unavailable
Its diesel engine allows the pump to operate independently of mains electricity, making it practical for outdoor, agricultural and remote work locations.
Low-Consumption and Practical Operation
The LUTIAN 178F20H is designed around a 4-stroke diesel engine intended for practical outdoor operation. Product information highlights low oil consumption and low noise characteristics, while the diesel engine provides a dedicated power source without requiring an external electrical supply.
For best performance, the pump should be operated within the recommended pumping conditions. Actual flow will vary according to discharge height, pipe diameter, pipe length, bends, valves, water source conditions and other hydraulic resistance.
Compact and Portable Configuration
Despite its high-head capability, the LUTIAN 178F20H maintains a relatively compact configuration. Current Malaysian product specifications list the unit at approximately 48kg with dimensions around 565 × 455 × 560mm, allowing it to be transported between suitable work locations when required.
Its diesel-powered configuration and compact footprint make it useful for farms, construction areas and other locations where a fixed electric pump installation is impractical.
Key Features
- LUTIAN 178F20H high-head diesel water pump
- 2" suction and 2" discharge connections
- Maximum flow rate: approximately 30 m³/h / 500 L/min
- Maximum pump lift: 65m
- Maximum suction head: 7m
- Powered by LUTIAN LT178F diesel engine
- 4-stroke, single-cylinder, air-cooled diesel engine
- Advanced OHV engine design
- Rated engine output: 4kW / 5.2HP
- Engine displacement: 296cc
- Rated engine speed: 3600 RPM
- Self-priming pump design
- Aluminium-alloy pump construction
- Forged iron volute impeller
- Mechanical/water-resistant sealing system
- Designed for high-head water transfer
- Suitable for agricultural and irrigation applications
- Suitable for construction and general water-transfer work
- Compact and portable diesel-powered configuration
- Designed for reliable outdoor operation
Technical Specifications
| Specification | Details |
|---|---|
| Brand | LUTIAN |
| Model | 178F20H / LT-178F20H |
| Product Type | Diesel High-Head Water Pump |
| Pump Type | Self-Priming Water Pump |
| Suction Port | 2" |
| Discharge Port | 2" |
| Engine Type | Single-Cylinder, 4-Stroke, Air-Cooled Diesel |
| Engine Model | LT178F |
| Rated Output | 4kW / 5.2HP |
| Displacement | 296cc |
| Rated Speed | 3600 RPM |
| Maximum Flow Rate | 30 m³/h / approximately 500 L/min |
| Maximum Pump Lift | 65m |
| Maximum Suction Head | 7m |
| Net Weight | Approximately 48kg |
| Dimensions | Approximately 565 × 455 × 560mm |
| Fuel | Diesel |
| Starting System | Manual/Hand Start |
| Pump Construction | Aluminium Alloy |
| Application | High-Head Water Transfer |
Specifications are based on current Malaysian product listings and LUTIAN product information.
Included Accessories
The listed standard accessories include:
- 2" PVC coupling × 2
- PVC strainer
- Hose clips × 2
These accessories support connection of the pump to suitable suction and discharge hose systems. Actual supplied accessories may vary depending on the distributor or package configuration.
Agricultural and Irrigation Applications
The 178F20H is well suited to agricultural environments where water needs to be transferred from a pond, tank, reservoir or other water source to irrigation areas. Its high-head capability is particularly useful when water needs to reach elevated farmland or travel through longer pipe systems.
The 2" connection size provides a practical setup for irrigation hoses and pipework, while the diesel engine allows operation in fields and rural locations without dependence on mains electrical power.
Construction and Drainage Applications
For construction and outdoor work, the pump can be used for general water transfer, site drainage and removal of accumulated water where suitable clean or relatively clear water is available. Its diesel-powered design allows it to be deployed at locations without convenient electrical access.
The pump should not be used to handle liquids containing abrasive solids, corrosive chemicals or other materials outside the manufacturer's intended operating conditions.
Maintenance Recommendations
Regular maintenance is important for reliable diesel engine and pump performance. Recommended routine checks include:
- Check diesel fuel level before operation.
- Check engine oil level before every operating session.
- Inspect suction and discharge hoses for damage or leakage.
- Ensure all hose connections are properly tightened.
- Keep the suction strainer clean and unobstructed.
- Inspect the pump for water leakage around seals and connections.
- Ensure the pump is correctly primed before operation.
- Clean dirt and debris from the pump and engine exterior.
- Follow the manufacturer's recommended engine oil and service intervals.
- Allow the engine to cool before carrying out maintenance.
- Store the pump in a dry, protected location when not in use.
Important Operating Considerations
The stated 65m maximum pump lift represents a maximum performance condition and should not be interpreted as the flow rate available at every operating point. Actual water delivery depends on total pumping head, suction conditions, pipe diameter, hose length, fittings, elevation changes and system resistance.
For reliable suction performance, the suction line should be properly sealed and the supplied strainer should be positioned appropriately in the water source. Avoid running the pump dry, and always follow the manufacturer's operating and maintenance instructions.
Why Choose the LUTIAN 178F20H?
The LUTIAN 178F20H combines a 5.2HP diesel engine, 296cc displacement, 2-inch pump connections and 65-metre maximum head in a compact high-head pumping package. It is particularly suitable for users who need to transfer water over greater elevations or through systems requiring higher pumping pressure while operating independently from an electrical power supply.
With its LT178F diesel engine, self-priming pump design, durable pump construction and practical portable configuration, the 178F20H is suitable for agricultural irrigation, construction, landscaping, drainage and general high-head water-transfer applications.
Product Summary
The LUTIAN 178F20H Diesel Water Pump is a 2-inch high-head self-priming diesel water pump powered by a 296cc LT178F 4-stroke air-cooled diesel engine producing 4kW / 5.2HP at 3600 RPM. It delivers a maximum flow rate of approximately 30 m³/h (500 L/min) and a maximum pump lift of 65 metres, with a maximum suction head of 7 metres. With its durable construction, compact design and independent diesel power source, it is an effective solution for agricultural irrigation, water transfer, construction, drainage and other demanding outdoor pumping applications.
Inquiry - LUTIAN DIESEL WATER PUMPS - 178F20H