The LEO BP-ECH 20-20 is a 415V inverter-controlled horizontal multistage centrifugal pump designed for automatic water pressure boosting in domestic and light-commercial water supply systems. It uses integrated variable-speed control to regulate pump speed according to water demand, helping maintain stable pressure while reducing unnecessary high-speed operation. A Malaysian product listing confirms the 415V configuration, 2.2 kW / 3 HP rating, 200–467 L/min flow range and 26.1–17.2 m head range.
Product Specifications
| Specification | BP-ECH 20-20 |
|---|---|
| Brand | LEO |
| Series | BP-ECH |
| Model | BP-ECH 20-20 |
| Pump Type | Inverter Horizontal Multistage Pump |
| Voltage | 415V |
| Phase | 3 Phase |
| Frequency | 50 Hz |
| Motor Power | 2.2 kW / 3.0 HP |
| Pump Design | Horizontal Multistage Centrifugal |
| Flow Range | 200 – 467 L/min |
| Flow Range | 12 – 28 m³/h |
| Head Range | 26.1 – 17.2 m |
| Maximum Suction Height | 8 m |
| Inlet Size | 2" |
| Outlet Size | 2" |
| Control System | Integrated Inverter / Variable-Speed Control |
| Pressure Control | Automatic Constant Pressure |
| Pump Construction | Stainless Steel |
| Shaft | Stainless Steel |
| Operation | Automatic Variable Speed |
| Dry-Running Protection | Yes |
| Auto Restart | Yes |
| Non-Return Valve | Built-In |
| Installation | Horizontal |
| Main Application | Water Pressure Boosting |
The underlying ECH20-20 hydraulic specification confirms the 2.2 kW pump configuration and performance points of 12, 16, 20, 24 and 28 m³/h, corresponding to approximately 26.1, 24.4, 22.4, 19.8 and 17.2 m of head respectively.
Key Features
• 415V three-phase electrical configuration
• 2.2 kW / 3 HP motor
• Horizontal multistage centrifugal pump
• Integrated inverter speed control
• Automatic constant-pressure operation
• Variable-speed adjustment according to water demand
• Automatic start and stop
• Built-in dry-running protection
• Automatic restart function
• Built-in non-return valve
• Stainless-steel pump construction
• Compact horizontal configuration
• Quiet operation
• Easy installation and operation
• Suitable for continuous and variable-demand water supply applications
LEO's BP-ECH range is designed around intelligent pressure boosting, with integrated variable-speed control, dry-run protection and automatic operation.
Hydraulic Performance
| Flow Rate | Approx. Head |
|---|---|
| 12 m³/h | 26.1 m |
| 16 m³/h | 24.4 m |
| 20 m³/h | 22.4 m |
| 24 m³/h | 19.8 m |
| 28 m³/h | 17.2 m |
Equivalent flow values:
| Flow Rate | Approx. L/min |
|---|---|
| 12 m³/h | 200 L/min |
| 16 m³/h | 267 L/min |
| 20 m³/h | 333 L/min |
| 24 m³/h | 400 L/min |
| 28 m³/h | 467 L/min |
These figures show that available pump head decreases as flow demand increases, which is typical of a centrifugal pump performance curve.
Intelligent Inverter Operation
The BP-ECH 20-20 is designed to automatically adjust pump speed according to the actual water requirement.
When a tap, shower, washing system or other outlet is opened, pressure in the pipe network drops. The pressure-control system detects the change and increases pump speed to restore the required pressure.
When demand decreases, the inverter reduces motor speed. When water consumption stops, the pump can automatically stop.
This provides several advantages:
• More stable water pressure
• Reduced pressure fluctuations
• Lower energy consumption during partial-demand operation
• Reduced mechanical stress during starting and stopping
• Automatic operation
• Improved comfort for multiple water outlets
• Better matching between pump output and actual demand
Multistage Pump Construction
The BP-ECH 20-20 uses multiple impeller stages to develop the required discharge pressure. Instead of relying on a single impeller to generate the complete head, each stage contributes to the overall pressure produced by the pump.
This makes the multistage design particularly suitable for water pressure boosting where a combination of substantial flow and pressure is required.
The corresponding ECH20-20 construction uses stainless-steel pump components and a stainless-steel shaft. LEO specifies the ECH20 range for water supply, pressure boosting, irrigation, industrial applications and other clean-water duties.
Applications
The LEO BP-ECH 20-20 can be used for:
• Domestic water pressure boosting
• Large residential houses
• Multi-storey homes
• Villas
• Apartments
• Residential developments
• Small commercial buildings
• Offices
• Schools
• Small hotels
• Restaurants
• Shops and retail premises
• Water tank pressure boosting
• Pipeline pressure boosting
• Garden irrigation
• Agricultural water supply
• General clean-water distribution
• Light industrial water supply
LEO identifies water supply, pressure boosting, irrigation, industry and other clean-water applications within the ECH pump family.
Maximum Suction
The specified maximum suction height is 8 metres. Correct suction-pipe sizing and installation are important to prevent excessive suction losses and air ingress.
For best performance, the pump should be positioned as close as practical to the water source, with the suction piping kept short and adequately sized.
Pump Materials
The stainless-steel construction provides good resistance to corrosion and makes the pump suitable for clean-water pressure boosting applications.
The corresponding ECH20 pump specification identifies:
• Stainless-steel shaft
• Stainless-steel pump construction
• Stainless-steel hydraulic components
• Compact horizontal arrangement
LEO specifies a maximum liquid temperature of +85°C for the ECH20 family, although the exact allowable temperature for the inverter-controlled BP-ECH configuration should be checked against the applicable nameplate/datasheet.
Installation Recommendations
For reliable operation:
• Install the pump on a stable and level surface.
• Use correctly sized suction and discharge pipes.
• Support the connected pipework independently.
• Ensure all suction connections are properly sealed.
• Avoid excessive restrictions on the suction side.
• Install isolation valves where required for servicing.
• Ensure sufficient water supply to the pump.
• Provide proper electrical grounding/earthing.
• Protect the inverter/controller from unsuitable environmental conditions.
• Provide sufficient clearance for maintenance.
• Avoid operating outside the specified hydraulic range.
Maintenance
Regular maintenance should include:
• Checking suction and discharge connections
• Inspecting for water leakage
• Checking electrical connections
• Monitoring pump pressure
• Checking for unusual vibration or noise
• Inspecting valves and piping
• Ensuring adequate water supply
• Keeping the motor and controller clean
• Checking for abnormal operating conditions
• Inspecting seals and other wear components when necessary
Suitable Water
The BP-ECH 20-20 is primarily intended for clean water and compatible liquids.
Typical applications include:
• Fresh water
• Storage-tank water
• Treated water
• Clean rainwater
• General service water
It should not be used for heavily contaminated water, abrasive slurry or chemically aggressive liquids unless material compatibility and operating conditions have been specifically confirmed.
Main Advantages
The LEO BP-ECH 20-20 provides a combination of:
High Flow Capacity: Up to approximately 467 L/min within the published hydraulic range.
Multistage Pressure Generation: Multiple impeller stages provide the required pressure for boosting applications.
415V Three-Phase Operation: Suitable for installations with an appropriate 415V three-phase supply.
Intelligent Pressure Control: The inverter adjusts pump speed according to water demand.
Automatic Operation: The system can start, regulate speed and stop automatically.
Protection Functions: Dry-running protection and automatic restart help protect the pump during abnormal water-supply conditions.
Stainless-Steel Construction: Provides durability and corrosion resistance for clean-water applications.
Product Summary
The LEO BP-ECH 20-20 (415V) is a 3 HP / 2.2 kW intelligent inverter horizontal multistage pump with a published flow range of approximately 200–467 L/min and head range of 26.1–17.2 m. Its integrated variable-speed control makes it suitable for automatic constant-pressure water supply systems where demand changes throughout the day.
Inquiry - LEO INVERTER HORIZONTAL MULTISTAGE PUMPS (415V) - BP-ECH 20-20