B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO INVERTER HORIZONTAL MULTISTAGE PUMPS - BP-ECH 20-30



The LEO BP-ECH 20-30 is an intelligent inverter-controlled horizontal multistage centrifugal pump designed for automatic water pressure boosting. It combines a stainless-steel multistage pump with integrated variable-speed control, allowing the pump to automatically adjust its operating speed according to actual water demand.

For the BP-ECH 20-30, published Malaysian specifications indicate a 415V configuration, 4.0 kW / 5.5 HP rating, flow range of 200–467 L/min and head range of 39.9–26.9 m.

Product Specifications

Specification BP-ECH 20-30
Brand LEO
Series BP-ECH
Model BP-ECH 20-30
Pump Type Inverter Horizontal Multistage Pump
Voltage 415V
Phase 3 Phase
Frequency 50 Hz
Motor Power 4.0 kW / 5.5 HP
Pump Design Horizontal Multistage Centrifugal
Flow Range 200 – 467 L/min
Flow Range 12 – 28 m³/h
Head Range 39.9 – 26.9 m
Maximum Suction Height 8 m
Inlet / Outlet 2" × 2"
Control System Integrated Variable-Speed Inverter
Pressure Control Automatic Constant Pressure
Operation Automatic Variable Speed
Pump Construction Stainless Steel
Dry-Running Protection Yes
Auto Restart Yes
Non-Return Valve Built-In
Dimensions 420 × 215 × 243 mm
Weight Approx. 13.2 kg
Installation Horizontal
Main Application Water Pressure Boosting

The published BP-ECH 20-30 listing specifies 420 × 215 × 243 mm dimensions and approximately 13.2 kg weight.

Hydraulic Performance

The corresponding ECH20-30 hydraulic data provides the following performance points:

Flow Rate Flow Approx. Head
12 m³/h 200 L/min 39.9 m
16 m³/h 267 L/min 38.0 m
20 m³/h 333 L/min 35.5 m
24 m³/h 400 L/min 31.4 m
28 m³/h 467 L/min 26.9 m

These values represent different points along the pump's hydraulic performance curve. As flow increases, the available head decreases.

Key Features

• Integrated inverter speed control
• Automatic constant-pressure water supply
• Variable-speed operation according to water demand
• Automatic start and stop
• Built-in dry-running protection
• Automatic restart function
• Built-in non-return valve
• Stainless-steel pump construction
• Compact horizontal configuration
• Quiet operation
• Easy installation and operation
• Reduced pressure fluctuation
• Suitable for variable-demand water supply systems
• Designed for domestic and light-commercial pressure boosting

The BP-ECH 20-30 listing specifically identifies constant pressure with integrated speed control, dry-running protection with auto-restart, quiet operation, stainless-steel construction and a built-in non-return valve.

Intelligent Inverter Operation

The integrated inverter continuously adjusts pump speed according to water consumption.

When an outlet is opened, system pressure decreases. The controller detects this pressure change and increases motor speed to supply additional water.

When demand decreases, the inverter reduces motor speed. When water consumption stops, the pump can automatically stop.

This operating principle provides:

• More stable water pressure
• Automatic pressure regulation
• Reduced unnecessary high-speed operation
• Lower energy consumption during partial-demand conditions
• Smoother starting and stopping
• Reduced mechanical stress
• Automatic operation without continuous manual adjustment

Multistage Pump Design

The BP-ECH 20-30 uses multiple impeller stages to generate higher discharge pressure. Each stage contributes to the overall head produced by the pump.

The corresponding ECH20-30 specification provides substantially higher head than the ECH20-20 while maintaining the same nominal 12–28 m³/h flow range. The ECH20-30 is specified at 39.9–26.9 m head across this range.

This makes the BP-ECH 20-30 suitable where both relatively high water flow and higher pressure are required.

Pump Construction

The ECH20 family uses stainless-steel pump construction and a stainless-steel shaft. LEO specifies a maximum liquid temperature of +85°C, maximum suction height of 8 m, maximum operating pressure of 5 bar and a pH range of 4–10 for the ECH20 family.

For the BP-ECH inverter version, the applicable product nameplate and local technical documentation should be used as the final reference for operating limits.

Applications

The LEO BP-ECH 20-30 is suitable for:

• Domestic water pressure boosting
• Large residential houses
• Multi-storey homes
• Villas
• Apartments
• Residential developments
• Small commercial buildings
• Offices
• Schools
• Small hotels
• Restaurants
• Shops and retail premises
• Water tank pressure boosting
• Pipeline pressure boosting
• General clean-water distribution
• Garden irrigation
• Agricultural water supply
• Light industrial water supply

The broader LEO ECH family is specified for water supply, pressure boosting, irrigation and industrial applications, including applications involving tall buildings, pumping stations, washing systems, water treatment and irrigation.

Pressure Boosting Applications

The BP-ECH 20-30 is particularly useful where water pressure needs to remain relatively stable despite changes in consumption.

For example, a building may have several outlets operating simultaneously. Instead of operating continuously at one fixed speed, the inverter-controlled pump can vary its speed to match the actual demand.

This is particularly useful for:

• Multiple bathrooms
• Multiple shower systems
• Kitchen and utility water outlets
• Commercial washrooms
• Building water distribution systems
• Tank-to-building booster systems

Maximum Suction Height

The published ECH20 specifications provide a maximum suction height of 8 m.

Correct suction-pipe design is important. The suction pipe should be appropriately sized, properly sealed and installed to minimize friction losses and prevent air from entering the system.

Where practical, positioning the pump close to the water source can improve suction conditions.

Installation Recommendations

For reliable operation:

• Install the pump on a firm, level surface.
• Ensure adequate support for the pump and piping.
• Use correctly sized suction and discharge pipes.
• Support connected pipework independently.
• Ensure suction connections are completely airtight.
• Avoid excessive restrictions on the suction side.
• Install suitable isolation valves for maintenance.
• Ensure adequate water supply to the pump.
• Provide proper electrical grounding/earthing.
• Protect the inverter/controller from unsuitable environmental exposure.
• Provide sufficient clearance for servicing.
• Avoid operation outside the specified hydraulic range.

Suitable Fluid

The BP-ECH 20-30 is intended primarily for clean water and compatible liquids.

Typical applications include:

• Fresh water
• Storage-tank water
• Treated water
• Clean rainwater
• General service water

The ECH20 family specifies a maximum liquid temperature of +85°C and pH 4–10.

The pump should not be used for heavily contaminated water, abrasive slurry, liquids containing excessive solids or chemically aggressive fluids unless compatibility has been specifically confirmed.

Protection Functions

The BP-ECH 20-30 incorporates protection and control functions intended to simplify automatic operation.

Dry-running protection helps prevent continued operation when the pump does not have an adequate water supply. The automatic restart function allows the system to attempt operation again when appropriate conditions are restored.

The built-in non-return valve helps prevent reverse flow through the pump when the system is not operating.

Maintenance

Recommended periodic checks include:

• Inspecting for water leakage
• Checking suction and discharge connections
• Checking electrical connections
• Monitoring operating pressure
• Checking for abnormal vibration
• Checking for unusual operating noise
• Inspecting valves and piping
• Ensuring adequate water supply
• Keeping the motor and inverter/controller clean
• Checking seals and other wear components when required
• Confirming that the pump is not repeatedly operating under dry conditions

Advantages of BP-ECH 20-30

The BP-ECH 20-30 provides several advantages for automatic water pressure systems:

High Flow Capacity: Up to approximately 467 L/min within the published hydraulic range.

Higher Pressure: Up to approximately 39.9 m head at the lower end of the published flow range.

Intelligent Variable-Speed Control: Pump speed is adjusted according to demand.

Constant Pressure: Designed to maintain more consistent pressure as water consumption changes.

Automatic Operation: Automatic starting, speed regulation and stopping reduce the need for manual control.

Stainless-Steel Construction: Provides durability and corrosion resistance for suitable clean-water applications.

Compact Design: The published dimensions are approximately 420 × 215 × 243 mm.

Scope of Delivery

• 1 × LEO Inverter Horizontal Multistage Pump BP-ECH 20-30

Product Summary

The LEO BP-ECH 20-30 is a 415V, 4.0 kW / 5.5 HP inverter horizontal multistage pump designed for automatic constant-pressure water boosting. It provides a published flow range of 200–467 L/min and head range of approximately 39.9–26.9 m, with 2" × 2" connections, stainless-steel construction, dry-running protection, automatic restart and an integrated variable-speed controller.



 Inquiry - LEO INVERTER HORIZONTAL MULTISTAGE PUMPS - BP-ECH 20-30