B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO VERTICAL MULTISTAGE PUMPS - EVPM 2-5



The LEO EVPM 2-5 is a vertical multistage centrifugal pump designed for water pressure boosting, high-rise building water supply, industrial water systems, cleaning systems and irrigation applications. Its vertical multistage configuration provides higher pressure in a compact footprint, making it suitable where installation space is limited.

The published Malaysian specification lists the EVPM 2-5 as a 220V model with a 1.0 kW / 1.5 HP motor, flow range of 16.7–67 L/min and head range of 57–15 m, with 1" × 1" inlet and outlet connections.

Product Specifications

Specification EVPM 2-5
Brand LEO
Product Series EVPM
Model EVPM 2-5
Pump Type Vertical Multistage Centrifugal Pump
Voltage 220V
Phase Single Phase
Motor Power 1.0 kW / 1.5 HP
Flow Range 16.7 – 67 L/min
Flow Range Approx. 1 – 4 m³/h
Head Range 57 – 15 m
Inlet Size 1"
Outlet Size 1"
Inlet / Outlet 1" × 1"
Pump Orientation Vertical
Liquid Temperature 5°C – 60°C
Maximum Altitude Up to 1,000 m
Dimensions Approx. 420 × 315 × 800 mm
Weight Approx. 20.5 kg
Main Application Water Supply & Pressure Boosting

The dimensions and weight above are from the published EVPM 2-5 Malaysian product listing.

Hydraulic Performance

The EVPM 2-5 has a published flow range of approximately 16.7–67 L/min, with the available head decreasing as flow increases. The published maximum head is 57 m and the head at the maximum stated flow is approximately 15 m.

Flow Rate Approx. Head
16.7 L/min 57 m
33.3 L/min Approx. 48–49 m
50 L/min Approx. 32–34 m
67 L/min 15 m

The intermediate values should be treated as approximate performance-curve readings; the manufacturer's published endpoints are 57–15 m over the 16.7–67 L/min range.

Key Features

• Vertical multistage centrifugal pump design
• 220V single-phase electrical supply
• 1.0 kW / 1.5 HP motor
• Flow capacity up to approximately 67 L/min
• Maximum published head of approximately 57 m
• 1" × 1" inlet and outlet connections
• Compact vertical configuration
• High-pressure multistage hydraulic design
• Rotatable water inlet and outlet
• Advanced hydraulic design for stable operation
• High-efficiency hydraulic performance
• Cast-iron water inlet and outlet with anti-rust treatment
• High-strength engineering-plastic flow-passage components
• Stainless-steel welded shaft
• Suitable for water pressure boosting
• Suitable for commercial and industrial water applications

Vertical Multistage Design

The EVPM 2-5 uses multiple hydraulic stages arranged vertically. Each impeller stage contributes to the total pressure generated by the pump. This allows the pump to achieve a relatively high discharge head without requiring a large horizontal installation area.

The vertical design is particularly useful for pressure-boosting systems where floor space is restricted.

LEO's EVP series is designed for a broad range of water-supply and pressure-boosting applications, including main-pipe pressure boosting, high-rise buildings, industrial water systems, cleaning systems and irrigation.

Hydraulic Construction

The EVPM 2-5 uses high-strength engineering-plastic components within the hydraulic flow passages. The water inlet and outlet use cast iron with anti-rust treatment. LEO's broader EVP documentation also specifies a reliable stainless-steel welded shaft.

This construction provides a balance of hydraulic performance, durability and corrosion resistance for clean-water applications.

Rotatable Inlet and Outlet

The water inlet and outlet can be rotated to accommodate different installation requirements. This provides additional flexibility when connecting the pump to existing pipework or installing the unit in a restricted space.

Pipework should be independently supported so that excessive pipe loading is not transferred to the pump connections.

Applications

The LEO EVPM 2-5 is suitable for:

• Domestic water supply
• Residential water pressure boosting
• Main-pipe pressure boosting
• High-rise building water supply
• Multi-storey buildings
• Water tank pressure boosting
• Commercial buildings
• Industrial water systems
• Cleaning systems
• High-pressure washing systems
• Firefighting systems where properly engineered
• Pressure tank systems
• Sprinkler irrigation
• Drip irrigation
• Air-conditioning water systems
• Cooling-water systems
• Industrial cleaning
• General clean-water transfer

LEO identifies pressure boosting for main pipes and high-rise buildings, industrial water systems, cleaning, high-pressure washing, firefighting, pressure tanks, sprinkler/drip irrigation, air-conditioning, cooling systems and industrial cleaning as applications for the EVP family.

Pressure Boosting

The EVPM 2-5 is suitable for applications where the available incoming water pressure is insufficient for the downstream system.

Typical uses include:

• Increasing water pressure to upper floors
• Boosting water from storage tanks
• Improving pressure in long pipe runs
• Supplying multiple water outlets
• Supporting high-pressure cleaning equipment
• Supplying irrigation systems
• Industrial process-water supply
• Pressure tank applications

Its five-stage configuration provides substantially higher pressure than lower-stage EVPM 2 models while retaining the same nominal flow class.

Operating Temperature

The published EVPM 2-5 specification gives a liquid-temperature range of 5°C to 60°C and an altitude limit of up to 1,000 m.

LEO's broader EVP documentation lists a wider range for some EVP configurations, including +4°C to 75°C, so the model-specific EVPM 2-5 specification should be used when determining operating limits for an actual installation.

Suitable Fluid

The EVPM 2-5 is primarily designed for clean water and compatible liquids.

Suitable applications include:

• Fresh water
• Clean storage-tank water
• Treated water
• General service water
• Clean irrigation water
• Cooling water within the specified temperature range

The pump should not be used for heavily contaminated water, abrasive slurry or liquids containing excessive solids unless compatibility has been specifically confirmed.

Installation Recommendations

For reliable operation:

• Install the pump vertically on a stable foundation.
• Use correctly sized suction and discharge pipes.
• Keep the suction line as short and direct as practical.
• Ensure suction connections are airtight.
• Avoid excessive suction-side restrictions.
• Support connected pipework independently.
• Install suitable isolation valves for maintenance.
• Ensure adequate water supply to the pump.
• Provide proper electrical grounding/earthing.
• Protect the motor from excessive moisture and unsuitable environmental conditions.
• Provide sufficient clearance for inspection and servicing.
• Avoid operating outside the specified hydraulic range.

Maintenance

Recommended periodic maintenance includes:

• Check the pump for water leakage.
• Inspect suction and discharge connections.
• Check electrical terminals and wiring.
• Monitor operating pressure and flow.
• Check for abnormal vibration.
• Check for unusual operating noise.
• Inspect valves and connected pipework.
• Ensure adequate water supply.
• Inspect the mechanical seal for leakage.
• Keep the pump exterior clean.
• Check wear components when required.

Advantages of EVPM 2-5

High Pressure Capability: The EVPM 2-5 provides up to approximately 57 m head at the lower end of its published flow range.

1.5 HP Motor: The 1.0 kW motor provides additional power compared with the EVPM 2-3 and EVPM 2-4 configurations.

Compact Vertical Design: The vertical arrangement provides a relatively small floor footprint while delivering multistage pressure.

220V Single-Phase Operation: Suitable for installations with an appropriate 220V single-phase supply.

Flexible Pipe Arrangement: The inlet and outlet can be rotated to accommodate different installation requirements.

Stable Hydraulic Operation: LEO specifies an advanced hydraulic design intended to provide stable operation and high efficiency.

Corrosion Protection: Cast-iron water connections receive anti-rust treatment, while high-strength engineering plastics are used in the flow passages.

Product Summary

The LEO EVPM 2-5 is a 220V, 1.0 kW / 1.5 HP vertical multistage centrifugal pump with a published flow range of 16.7–67 L/min and head range of approximately 57–15 m. It features 1" × 1" connections, a compact vertical design, rotatable inlet/outlet arrangement, high-strength hydraulic components and a stainless-steel welded shaft.

It is suitable for domestic and commercial water supply, pressure boosting, high-rise buildings, industrial water systems, high-pressure cleaning, irrigation and other clean-water applications.



 Inquiry - LEO VERTICAL MULTISTAGE PUMPS - EVPM 2-5