B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO VERTICAL MULTISTAGE PUMPS - EVPM 4-3



The LEO EVPM 4-3 is a vertical multistage centrifugal pump designed for water supply, pressure boosting and industrial water applications. Its vertical configuration provides higher pressure while maintaining a relatively compact footprint, making it suitable for residential, commercial and industrial installations.

The EVPM 4-3 is a 220V single-phase model with a 0.75 kW / 1 HP motor. Published specifications give a flow range of 16.7–67 L/min and a head range of approximately 36–16 m. It uses 1" × 1" inlet and outlet connections.

Product Specifications

Specification EVPM 4-3
Brand LEO
Product Series EVPM / EVP4
Model EVPM 4-3
Pump Type Vertical Multistage Centrifugal Pump
Voltage 220V
Phase Single Phase
Frequency 50 Hz
Motor Power 0.75 kW / 1 HP
Nominal Flow Class 4 m³/h
Flow Range 16.7 – 67 L/min
Flow Range Approx. 1 – 4 m³/h
Head Range Approx. 36 – 16 m
Number of Stages 3
Inlet Size 1"
Outlet Size 1"
Inlet / Outlet 1" × 1"
Pump Orientation Vertical
Liquid Temperature 5°C – 60°C
Maximum Ambient Temperature 40°C
Maximum Working Pressure 15 bar
Maximum Altitude Up to 1,000 m
Motor Protection IP55
Motor Insulation Class F
Main Application Water Supply & Pressure Boosting

The Malaysian listing specifies 220V, 0.75 kW / 1 HP, 16.7–67 L/min, 36–16 m head and 1" × 1" connections. LEO's EVP4 technical data gives the more detailed performance curve and confirms the 0.75 kW motor rating for EVPm4-3.

Hydraulic Performance

LEO's published EVP4 performance table provides the following approximate head values for EVPm4-3:

Flow Rate Approx. Head
0 L/min 37 m
16.7 L/min 36 m
33.3 L/min 34 m
50 L/min 33 m
66.7 L/min 29 m
83.3 L/min 24 m
100 L/min 16 m

The Malaysian product listing summarizes the normal operating range as 16.7–67 L/min at approximately 36–16 m, while LEO's detailed pump curve extends to 100 L/min. For website cataloguing, the model's manufacturer performance curve should be used when selecting a specific duty point.

Key Features

• Vertical multistage centrifugal pump design
• 220V single-phase operation
• 0.75 kW / 1 HP motor
• Three-stage hydraulic configuration
• Flow range suitable for approximately 1–4 m³/h applications
• Head capability up to approximately 36–37 m in the normal operating range
• 1" × 1" inlet and outlet connections
• Compact vertical installation
• Advanced hydraulic design
• Stable operation
• High-efficiency hydraulic performance
• Rotatable water inlet and outlet
• Cast-iron inlet and outlet with anti-rust treatment
• High-strength engineering-plastic flow-passage components
• Stainless-steel pump jacket/shaft components
• Suitable for water pressure boosting
• Suitable for domestic, commercial and industrial clean-water applications

Vertical Multistage Construction

The EVPM 4-3 uses three hydraulic stages arranged vertically. Each impeller stage contributes to the total pressure generated by the pump.

This arrangement allows the pump to generate considerably more pressure than a basic single-stage pump while keeping the installation relatively compact.

The vertical configuration is particularly useful for:

• Pressure boosting
• Multi-storey water supply
• Tank-to-building water supply
• Industrial water systems
• Cleaning systems
• Irrigation systems

LEO identifies pressure boosting for main pipes and high-rise buildings, industrial water systems, cleaning systems, high-pressure washing, firefighting, pressure tanks and irrigation among the EVP series applications.

Hydraulic Construction

The EVP4 pump uses a combination of cast iron, stainless steel and engineering-plastic components.

The published construction information identifies:

• Cast-iron water inlet/outlet with anti-corrosion treatment
• AISI 304 stainless-steel jacket
• Noryl/PPO impeller
• Noryl/PPO diffuser
• Carbon/ceramic mechanical seal
• NBR sealing components
• Cast-iron flange and rear cover
• Stainless-steel hydraulic shaft components

This construction provides a balance between durability, corrosion resistance and hydraulic performance for clean-water applications.

Rotatable Water Connections

The water inlet and outlet can be arranged to suit different installation requirements. This provides flexibility when connecting the pump to existing pipework and can simplify installation where space is restricted.

Pipework should be independently supported to prevent excessive mechanical stress from being transferred to the pump connections.

Applications

The LEO EVPM 4-3 is suitable for:

• Domestic water supply
• Residential water pressure boosting
• Main-pipe pressure boosting
• Multi-storey building water supply
• High-rise building pressure boosting
• Water tank boosting
• Commercial buildings
• Offices
• Hotels
• Industrial water systems
• Cleaning systems
• High-pressure washing systems
• Pressure tank systems
• Sprinkler irrigation
• Drip irrigation
• Air-conditioning water systems
• Cooling-water circulation
• Industrial cleaning
• General clean-water transfer

LEO's official EVP documentation specifically lists high-rise water supply, main-pipe pressure boosting, industrial water systems, cleaning, high-pressure washing, firefighting, pressure tanks, sprinkler/drip irrigation, air-conditioning, cooling systems and industrial cleaning.

Pressure Boosting

The EVPM 4-3 is suitable where existing water pressure is insufficient for the downstream installation.

Typical applications include:

• Increasing water pressure to upper floors
• Boosting water from a storage tank
• Improving pressure in long pipe systems
• Supplying multiple water outlets
• Supporting high-pressure cleaning equipment
• Supplying irrigation systems
• Commercial water distribution
• Industrial process-water supply

The three-stage design provides a higher pressure capability than the lower-stage EVPM 4-2 while maintaining the same general 4 m³/h flow class.

Operating Conditions

The EVPM 4-3 is designed for clean-water applications within specified operating limits.

Published EVP4 information specifies:

• Liquid temperature: +5°C to +60°C
• Maximum ambient temperature: +40°C
• Maximum working pressure: 15 bar
• Motor protection: IP55
• Insulation class: F
• Altitude: up to 1,000 m

These limits should be checked against the actual pump nameplate and local LEO documentation for the specific unit before installation.

Suitable Fluid

The EVPM 4-3 is primarily intended for clean water and compatible low-viscosity liquids.

Suitable applications include:

• Fresh water
• Clean storage-tank water
• Treated water
• General service water
• Clean irrigation water
• Cooling water within the specified temperature range

The pump should not be used for heavily contaminated water, abrasive slurry or liquids containing excessive solids unless material compatibility has been confirmed.

Installation Recommendations

For reliable operation:

• Install the pump vertically on a firm and level foundation.
• Use correctly sized suction and discharge piping.
• Keep the suction pipe as short and direct as practical.
• Ensure suction connections are completely airtight.
• Avoid excessive restrictions on the suction side.
• Support connected pipework independently.
• Install appropriate isolation valves for servicing.
• Ensure adequate water supply to the pump.
• Provide proper electrical grounding/earthing.
• Protect the motor from excessive moisture.
• Provide adequate clearance for inspection and maintenance.
• Avoid operating outside the pump's recommended hydraulic range.

Maintenance

Regular maintenance should include:

• Checking the pump for water leakage
• Inspecting suction and discharge connections
• Checking electrical connections
• Monitoring pressure and flow
• Checking for abnormal vibration
• Checking for unusual operating noise
• Inspecting valves and pipework
• Ensuring sufficient water supply
• Checking mechanical-seal condition
• Keeping the motor and pump exterior clean
• Inspecting wear components when necessary

Advantages of EVPM 4-3

Higher Pressure: The three-stage configuration provides approximately 36 m head at 16.7 L/min and approximately 33 m at 50 L/min.

1 HP Motor: The 0.75 kW motor provides a practical balance between electrical consumption and pressure performance.

Compact Vertical Design: The vertical configuration minimizes floor space while providing multistage pressure.

220V Single Phase: Suitable for installations with a compatible 220V single-phase supply.

Flexible Installation: The inlet and outlet can be arranged according to installation requirements.

Stable Hydraulic Operation: LEO specifies an advanced hydraulic design intended to provide stable operation and high efficiency.

Corrosion Protection: The cast-iron water connections receive anti-rust treatment, while stainless steel and engineering-plastic components are used within the pump construction.

Product Summary

The LEO EVPM 4-3 is a 220V, 0.75 kW / 1 HP vertical multistage centrifugal pump with a three-stage hydraulic configuration, 1" × 1" connections and a published operating range of approximately 16.7–67 L/min with 36–16 m head. LEO's detailed EVP4 performance curve shows approximately 37 m maximum head at zero flow, decreasing to approximately 16 m at 100 L/min.

It is suitable for domestic water supply, pressure boosting, high-rise buildings, commercial water systems, industrial water applications, cleaning, irrigation and other clean-water duties.



 Inquiry - LEO VERTICAL MULTISTAGE PUMPS - EVPM 4-3