B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO VERTICAL MULTISTAGE PUMPS - EVPM 4-4



The LEO EVPM 4-4 is a vertical multistage centrifugal pump designed for water supply, pressure boosting and industrial water applications. Its four-stage vertical configuration provides higher discharge pressure while keeping the pump compact and suitable for installations where floor space is limited.

The EVPM 4-4 is a 220V model with a 1.0 kW / 1.5 HP motor, a published flow range of 16.7–67 L/min and a head range of approximately 46–20 m. It uses 1" × 1" inlet and outlet connections.

Product Specifications

Specification EVPM 4-4
Brand LEO
Product Series EVPM / EVP4
Model EVPM 4-4
Pump Type Vertical Multistage Centrifugal Pump
Voltage 220V
Phase Single Phase
Motor Power 1.0 kW / 1.5 HP
Number of Stages 4
Flow Range 16.7 – 67 L/min
Flow Range Approx. 1 – 4 m³/h
Head Range 46 – 20 m
Inlet Size 1"
Outlet Size 1"
Inlet / Outlet 1" × 1"
Pump Orientation Vertical
Liquid Temperature 5°C – 60°C
Maximum Altitude Up to 1,000 m
Dimensions Approx. 420 × 315 × 800 mm
Weight Approx. 20.5 kg
Main Application Water Supply & Pressure Boosting

The model-specific Malaysian listing confirms the 220V supply, 1.0 kW / 1.5 HP power rating, 16.7–67 L/min flow, 46–20 m head, 1" × 1" connections, approximately 420 × 315 × 800 mm dimensions and 20.5 kg weight.

Hydraulic Performance

The EVPM 4-4 is designed for applications requiring a combination of moderate-to-high flow and pressure. The published operating range is 16.7–67 L/min, with approximately 46 m head at the lower flow end and 20 m at the upper published flow point.

Flow Rate Approx. Head
16.7 L/min 46 m
33 L/min Approx. 40–42 m
50 L/min Approx. 30–33 m
67 L/min 20 m

The intermediate figures are indicative performance-curve values. Actual pressure at a particular flow depends on pipe diameter, pipe length, elevation, valves, fittings and total system resistance.

Key Features

• Four-stage vertical multistage centrifugal design
• 220V electrical supply
• 1.0 kW / 1.5 HP motor
• Flow range of 16.7–67 L/min
• Head range of approximately 46–20 m
• 1" × 1" inlet and outlet
• Compact vertical installation
• Advanced hydraulic design
• Stable pump operation
• High-efficiency hydraulic performance
• Rotatable water inlet and outlet
• Cast-iron water inlet and outlet with anti-rust treatment
• High-strength engineering-plastic flow-passage components
• Suitable for clean-water pressure boosting
• Suitable for residential, commercial and industrial water systems

Four-Stage Vertical Design

The EVPM 4-4 incorporates four hydraulic stages arranged vertically. Each stage contributes to the total pressure developed by the pump.

Compared with a single-stage centrifugal pump, the multistage arrangement allows the EVPM 4-4 to produce substantially higher pressure without requiring a large horizontal pump footprint.

The vertical configuration is particularly suitable for:

• Building water-pressure boosting
• Water tank boosting
• Main-pipe pressure boosting
• Multi-storey water supply
• Industrial water systems
• Cleaning systems
• Irrigation systems

LEO specifies the EVP family for main-pipe and high-rise-building pressure boosting, industrial water systems, cleaning, high-pressure washing, firefighting, pressure tanks and irrigation applications.

Hydraulic Construction

The EVPM series uses high-strength engineering-plastic components within the hydraulic flow passages. The water inlet and outlet are manufactured from cast iron with anti-rust treatment.

This construction provides a practical combination of hydraulic efficiency, mechanical strength and corrosion resistance for clean-water applications.

The multistage hydraulic arrangement also allows the pump to achieve greater pressure while maintaining a relatively compact physical size.

Rotatable Inlet and Outlet

The EVPM 4-4 has rotatable water inlet and outlet connections, allowing the pipe orientation to be adjusted according to installation requirements. This can simplify connection to existing pipework and improve installation flexibility in confined spaces.

Connected piping should be properly supported so that excessive mechanical loads are not transferred to the pump connections.

Applications

The LEO EVPM 4-4 is suitable for:

• Domestic water supply
• Residential water pressure boosting
• Main-pipe pressure boosting
• High-rise building water supply
• Multi-storey buildings
• Water tank boosting
• Commercial buildings
• Industrial water systems
• Cleaning systems
• High-pressure washing systems
• Firefighting water systems where properly engineered
• Pressure tank systems
• Sprinkler irrigation
• Drip irrigation
• Air-conditioning water systems
• Cooling-water systems
• Industrial cleaning
• General clean-water transfer

LEO's official EVP documentation identifies water supply and pressure boosting, high-rise buildings, industrial water systems, cleaning systems, high-pressure washing, firefighting, pressure tanks, sprinkler/drip irrigation, air-conditioning and cooling applications.

Pressure Boosting Applications

The EVPM 4-4 can be used where existing water pressure is insufficient for the required downstream system.

Typical applications include:

• Increasing pressure to upper floors
• Boosting water from storage tanks
• Improving pressure in long pipe runs
• Supplying multiple water outlets
• Supporting high-pressure washing equipment
• Irrigation pressure boosting
• Commercial building water supply
• Industrial process-water supply
• Pressure tank systems

Its four-stage configuration provides higher pressure capability than the EVPM 4-3 while maintaining the same general 4 m³/h flow class.

Operating Conditions

The published EVPM 4-4 specification gives:

• Liquid temperature: 5°C to 60°C
• Maximum altitude: up to 1,000 m
• Voltage: 220V
• Motor power: 1.0 kW / 1.5 HP

For installations involving unusual water temperatures, altitude or fluid characteristics, the model-specific LEO technical documentation should be checked before selection.

Suitable Fluids

The EVPM 4-4 is primarily intended for clean water and compatible low-viscosity liquids.

Suitable applications include:

• Fresh water
• Clean storage-tank water
• Treated water
• General service water
• Clean irrigation water
• Cooling water within the specified temperature range

The pump should not be used for heavily contaminated water, abrasive slurry or liquids containing significant quantities of solids unless material compatibility has been specifically confirmed.

Installation Recommendations

For reliable operation:

• Install the pump vertically on a firm and level foundation.
• Use correctly sized suction and discharge piping.
• Keep the suction pipe as short and direct as practical.
• Ensure all suction connections are airtight.
• Avoid excessive restrictions on the suction side.
• Support connected pipework independently.
• Install isolation valves where required for maintenance.
• Ensure adequate water supply to the pump.
• Provide proper electrical grounding/earthing.
• Protect the motor from excessive moisture.
• Allow sufficient clearance around the pump for servicing.
• Avoid operating the pump outside its recommended hydraulic range.

Maintenance

Recommended periodic maintenance includes:

• Check for water leakage.
• Inspect suction and discharge connections.
• Check electrical connections and terminals.
• Monitor operating pressure and flow.
• Check for abnormal vibration.
• Check for unusual operating noise.
• Inspect valves and pipework.
• Ensure adequate water supply.
• Check the mechanical seal for leakage.
• Keep the pump exterior clean.
• Inspect wear components when required.

Advantages of EVPM 4-4

Four-Stage Pressure Performance: The four-stage hydraulic arrangement allows the pump to deliver approximately 46 m head at the lower published flow range.

1.5 HP Motor: The 1.0 kW motor provides a suitable power level for higher-pressure domestic, commercial and industrial water applications.

Compact Vertical Configuration: The vertical arrangement reduces floor-space requirements while maintaining multistage pumping capability.

220V Operation: Suitable for installations with a compatible 220V electrical supply.

Flexible Installation: Rotatable inlet and outlet connections allow greater flexibility when connecting pipework.

Stable Hydraulic Operation: LEO specifies an advanced hydraulic model designed for stable operation and high efficiency.

Anti-Rust Water Connections: The cast-iron water inlet and outlet receive anti-rust treatment.

EVPM 4-3 vs EVPM 4-4

Specification EVPM 4-3 EVPM 4-4
Voltage 220V 220V
Motor Power 0.75 kW / 1 HP 1.0 kW / 1.5 HP
Stages 3 4
Flow Range 16.7–67 L/min 16.7–67 L/min
Head Range 36–16 m 46–20 m
Inlet / Outlet 1" × 1" 1" × 1"
Main Difference Lower pressure Higher pressure

The EVPM 4-4 is therefore the higher-pressure option between these two models, with a larger 1.0 kW / 1.5 HP motor and an additional hydraulic stage.

Product Summary

The LEO EVPM 4-4 is a 220V, 1.0 kW / 1.5 HP vertical multistage centrifugal pump featuring a four-stage hydraulic configuration, 16.7–67 L/min flow, approximately 46–20 m head, and 1" × 1" inlet/outlet connections.

Its compact vertical construction, multistage hydraulic design and flexible inlet/outlet arrangement make it suitable for domestic and commercial water pressure boosting, high-rise buildings, industrial water systems, cleaning, high-pressure washing, irrigation and other clean-water applications.



 Inquiry - LEO VERTICAL MULTISTAGE PUMPS - EVPM 4-4