B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO STAINLESS STEEL CENTRIFUGAL PUMPS - AMS 370/2.2



The LEO AMS 370/2.2 is a high-flow stainless-steel centrifugal pump designed for domestic and commercial water supply, pipeline pressurization, irrigation, fish farming, industrial water transfer, building water supply and general clean-water applications. The model is equipped with a 2.2 kW / 3 HP, 415V three-phase motor, with a published maximum flow of approximately 520 L/min and maximum head of approximately 28 m.

LEO's AMS series uses an AISI 304 stainless-steel pump body and shaft, making it suitable for clean-water applications where corrosion resistance and durability are important.

Product Specifications

Specification AMS 370/2.2
Brand LEO
Model AMS 370/2.2
Pump Type Stainless Steel Centrifugal Pump
Pump Series AMS
Motor Power 2.2 kW
Motor Rating 3 HP
Voltage 415V
Phase 3 Phase
Frequency 50 Hz
Maximum Flow Rate 520 L/min
Maximum Flow Approx. 31.2 m³/h
Flow Range Approx. 25–520 L/min
Head Range Approx. 28–17 m
Maximum Head 28 m
Suction Connection 2"
Discharge Connection 1¼"
Inlet / Outlet 2" × 1¼"
Pump Body AISI 304 Stainless Steel
Shaft AISI 304 Stainless Steel
Motor Winding Copper
Motor Bearing C&U
Insulation Class F
Protection Class IPX4
Maximum Liquid Temperature +85°C
Maximum Ambient Temperature +40°C
Maximum Installation Altitude 1,000 m
Approx. Dimensions 465 × 240 × 270 mm
Approx. Weight 23 kg

The Malaysian specification identifies the AMS 370/2.2 as 2.2 kW / 3 HP, 415V, 25–520 L/min, 28–17 m head and 2" × 1¼" inlet/outlet.

High-Flow Centrifugal Pump

The AMS 370/2.2 is designed primarily for applications where high water flow is more important than very high pressure.

Its maximum published flow is approximately:

520 L/min = 31.2 m³/h

This makes the pump suitable for larger water-transfer systems than the smaller AMS models.

Typical applications include:

  • Large water tanks
  • Commercial water transfer
  • Irrigation systems
  • Industrial water circulation
  • Fish farming
  • Greenhouse irrigation
  • Building water supply
  • Pipeline pressurization
  • Water drainage and transfer
  • Central air-conditioning circulation

LEO specifically lists domestic water supply, equipment support, pipeline pressurization, garden and greenhouse watering, fish farming, industrial/mining applications, enterprise water supply and high-rise buildings among AMS applications.

Hydraulic Performance

The published performance range for the AMS 370/2.2 is approximately:

Parameter Performance
Minimum listed flow 25 L/min
Maximum flow 520 L/min
Maximum flow 31.2 m³/h
Maximum head 28 m
Head at higher flow Approximately 17 m
Pump type Single-stage centrifugal

The 28 m maximum head and 520 L/min maximum flow are not simultaneous operating points. The actual operating point must be determined from the pump performance curve and the system's total dynamic head.

System resistance is affected by:

  • Pipe length
  • Pipe diameter
  • Vertical elevation
  • Valves
  • Filters
  • Elbows
  • Fittings
  • Required outlet pressure
  • Water temperature

2.2 kW / 3 HP Motor

The AMS 370/2.2 uses a 2.2 kW / 3 HP three-phase motor supplied at 415V.

Key motor characteristics include:

  • 2.2 kW motor
  • 3 HP rating
  • 415V supply
  • Three-phase operation
  • Copper winding
  • C&U bearing
  • Class F insulation
  • IPX4 protection

The Malaysian product specification confirms the 415V three-phase configuration and 2.2 kW / 3 HP rating.

For a 415V three-phase installation, an appropriate motor starter, overload protection, short-circuit protection and proper earthing should be provided.

Stainless-Steel Pump Body

The AMS series incorporates an AISI 304 stainless-steel pump body. LEO also specifies an AISI 304 stainless-steel shaft.

Advantages include:

  • Improved corrosion resistance
  • Durable water-contact construction
  • Suitable for clean-water applications
  • Good resistance to normal environmental corrosion
  • Suitable for commercial and industrial water systems

AISI 304 Stainless-Steel Shaft

The shaft is manufactured from AISI 304 stainless steel.

It transfers the motor's rotational power to the impeller and is designed for reliable continuous water-pumping applications.

The stainless-steel shaft also provides good resistance to corrosion in normal clean-water service.

2" × 1¼" Connections

The AMS 370/2.2 has:

Suction: 2"
Discharge: 1¼"

This relatively large suction connection supports the pump's high-flow hydraulic capacity.

The suction side should be installed with appropriately sized piping to minimize:

  • Suction losses
  • Turbulence
  • Friction
  • Cavitation risk
  • Excessive negative pressure

The published Malaysian product specification confirms the 2" × 1¼" inlet/outlet configuration.

Maximum Head – 28 m

The AMS 370/2.2 has a published maximum head of approximately 28 m.

The head represents the pump's ability to overcome the combination of:

  • Static elevation
  • Pipe friction
  • Fitting losses
  • Valve losses
  • Equipment resistance
  • Required discharge pressure

At higher flow rates, available head decreases. Therefore, the pump should not be selected based only on the 28 m maximum figure.

Maximum Flow – 520 L/min

The maximum published flow is 520 L/min, equivalent to approximately:

520 L/min × 60 = 31,200 L/hour

or

31.2 m³/h

This high flow capacity makes the AMS 370/2.2 suitable for larger water-transfer and circulation systems.

Suitable Fluids

The AMS series is designed for clean water and liquids with physical and chemical characteristics similar to water.

Suitable applications include:

  • Clean fresh water
  • Treated water
  • Storage-tank water
  • Irrigation water
  • Cooling water
  • General service water
  • Clean industrial process water

For liquids containing abrasive solids, aggressive chemicals or heavy contamination, material and seal compatibility should be checked before use.

Domestic & Commercial Water Supply

The AMS series is applicable to domestic water supply and larger commercial water systems.

The AMS 370/2.2 is particularly appropriate for:

  • Commercial buildings
  • Large water tanks
  • Building water transfer
  • Water storage systems
  • Commercial irrigation
  • Utility water systems
  • General water distribution

Its high flow capacity allows significantly larger water volumes to be transferred compared with smaller domestic centrifugal pumps.

Pipeline Pressurization

LEO identifies pipeline pressurization as one of the AMS series applications.

The AMS 370/2.2 can be used to increase water pressure where the required pressure falls within its operating curve.

Typical installations include:

  • Main water lines
  • Irrigation pipelines
  • Commercial water distribution
  • Industrial water lines
  • Building water systems

Irrigation Applications

The AMS 370/2.2 is suitable for high-flow irrigation applications.

Potential uses include:

  • Agricultural irrigation
  • Garden irrigation
  • Greenhouse irrigation
  • Sprinkler systems
  • Nursery irrigation
  • Orchard irrigation
  • Water transfer from storage tanks

The high maximum flow of approximately 31.2 m³/h makes it appropriate for larger irrigation systems.

Fish Farming & Aquaculture

LEO specifically lists fish farming as an application for the AMS series.

Possible applications include:

  • Pond circulation
  • Tank water transfer
  • Aquaculture water circulation
  • Water exchange systems
  • Large-volume clean-water transfer

For aquaculture, the actual water quality and temperature should remain within the pump's specified operating conditions.

Industrial Applications

The AMS series is also designed for industrial and mining applications.

Potential uses for the AMS 370/2.2 include:

  • Industrial water transfer
  • Equipment cooling
  • Process-water circulation
  • Tank filling
  • Factory water supply
  • Utility-water transfer
  • Water circulation systems

For specialized industrial liquids, the pump's stainless-steel construction does not automatically make it suitable for all chemicals. Chemical compatibility should be confirmed.

Air-Conditioning & Heating Circulation

LEO identifies central air-conditioning and centralized heating circulation systems among the AMS applications.

The AMS 370/2.2 can therefore be considered for larger clean-water circulation systems where the required flow/head duty point is within its pump curve.

Operating Temperature

LEO specifies a maximum liquid temperature of +85°C for the AMS series. The maximum ambient temperature is +40°C.

This allows the pump to be used in certain warm-water circulation applications, subject to the exact model, seal configuration and manufacturer's operating limits.

Installation Altitude

LEO specifies an installation altitude of up to 1,000 m for the AMS series.

Installations at significantly higher elevations may require additional consideration because atmospheric pressure affects suction performance and cavitation margin.

Motor Protection

The AMS series features:

Insulation: Class F
Protection: IPX4
Motor winding: Copper
Bearing: C&U

LEO specifies integrated thermal protection for single-phase versions, while this AMS 370/2.2 is a three-phase 415V model, so an appropriate external overload/motor protection system should be provided.

Recommended Electrical Protection

For the 415V three-phase AMS 370/2.2 installation, use appropriate:

  • Motor circuit breaker
  • Overload relay
  • Short-circuit protection
  • Magnetic contactor/starter
  • Phase-loss protection where appropriate
  • Proper earthing
  • Correctly sized power cable

Protection settings should be based on the actual motor nameplate current.

Installation Recommendations

For reliable operation:

  • Install on a firm, level foundation.
  • Position as close to the water source as practical.
  • Use appropriately sized suction piping.
  • Keep the suction line short and direct.
  • Avoid unnecessary bends.
  • Ensure all suction connections are airtight.
  • Install a suitable strainer/foot valve where required.
  • Support the pipework independently.
  • Ensure adequate water supply.
  • Prime the pump before starting where required.
  • Check the motor rotation direction.
  • Provide proper electrical protection.
  • Ensure correct earthing.
  • Never operate the pump dry.

Maintenance

Recommended maintenance includes:

  • Check for water leakage.
  • Inspect the mechanical seal.
  • Check suction piping for air leaks.
  • Clean the suction strainer.
  • Check pump vibration.
  • Check abnormal operating noise.
  • Monitor motor temperature.
  • Inspect electrical terminals.
  • Check motor current.
  • Inspect valves and pipework.
  • Monitor flow and discharge pressure.
  • Check the pump foundation and mounting bolts.

Dimensions & Weight

The Malaysian product listing gives approximately:

Length: 465 mm
Width: 240 mm
Height: 270 mm
Weight: 23 kg.

These should be used as general product dimensions. For an installation requiring precise clearances, use the manufacturer's dimensional drawing.

Performance Summary

Parameter AMS 370/2.2
Motor Power 2.2 kW
Motor 3 HP
Voltage 415V
Phase 3 Phase
Maximum Flow 520 L/min
Maximum Flow 31.2 m³/h
Maximum Head 28 m
Minimum Listed Flow 25 L/min
Head Range 28–17 m
Suction 2"
Discharge 1¼"
Pump Body AISI 304 Stainless Steel
Shaft AISI 304 Stainless Steel
Max. Liquid Temperature +85°C
Max. Ambient Temperature +40°C
Weight Approx. 23 kg

Key Advantages

High Flow Capacity: Up to approximately 520 L/min / 31.2 m³/h.

3 HP Motor: Provides the power required for larger-volume water-transfer applications.

415V Three Phase: Suitable for commercial and industrial electrical installations.

AISI 304 Stainless-Steel Body: Provides corrosion resistance and durability.

AISI 304 Shaft: Provides reliable corrosion-resistant shaft construction.

28 m Maximum Head: Suitable for moderate-pressure, high-flow applications.

2" Suction: Helps accommodate the pump's high flow capacity.

+85°C Maximum Liquid Temperature: Suitable for selected warm-water circulation applications according to manufacturer's specifications.

Wide Application Range: Suitable for domestic, commercial, irrigation, fish farming, industrial and circulation applications.

Product Summary

The LEO AMS 370/2.2 is a 3 HP / 2.2 kW, 415V three-phase stainless-steel centrifugal pump designed for high-volume clean-water transfer and circulation. It provides a published maximum flow of approximately 520 L/min (31.2 m³/h) and maximum head of approximately 28 m, with 2" × 1¼" suction/discharge connections.

The pump features an AISI 304 stainless-steel body and shaft, Class F insulation and IPX4 motor protection. LEO lists the AMS series for domestic water supply, pipeline pressurization, irrigation, fish farming, industrial/mining applications, high-rise water supply and air-conditioning/heating circulation.



 Inquiry - LEO STAINLESS STEEL CENTRIFUGAL PUMPS - AMS 370/2.2