B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO JET PUMPS - AJM 30



The LEO AJM 30 is a compact self-priming jet pump designed for clean-water transfer, well-water lifting, garden irrigation and domestic pressure boosting. It uses a 0.3 kW / 0.4 HP single-phase motor, with a published operating range of approximately 5–35 L/min and 30–14 m head. The pump has 1" × 1" inlet/outlet connections and a maximum suction capability of approximately 9 m in the Malaysian specification.

Product Overview

The AJM 30 belongs to LEO's AJm self-priming jet-pump range with power below 1 kW. The pump is designed to maintain suction and provide pressure for domestic and light-duty water-supply applications. LEO identifies the series for transferring clean water or liquids with physical and chemical properties similar to water, lifting water from wells, garden irrigation and pressure boosting.

The AJM 30 uses a stainless-steel impeller, AISI 304 shaft and copper motor winding. The motor incorporates thermal protection, while the electrical construction is rated Class F insulation and IPX4 protection.

Technical Specifications

Specification LEO AJM 30
Brand LEO
Series AJm
Model AJM 30
Pump Type Self-Priming Jet Pump
Motor Power 0.3 kW / 0.4 HP
Voltage 220 V
Phase Single Phase
Frequency 50 Hz
Flow Range 5–35 L/min
Equivalent Flow 0.3–2.1 m³/h
Head Range 30–14 m
Maximum Suction Approx. 9 m
Inlet 1"
Outlet 1"
Impeller Stainless Steel
Shaft AISI 304 Stainless Steel
Motor Winding Copper
Insulation Class F
Protection Class IPX4
Built-in Thermal Protector Yes
Maximum Liquid Temperature +40°C
Maximum Ambient Temperature +40°C
Dimensions Approx. 200 × 180 × 400 mm*
Weight Approx. 6.2 kg*

*Dimensions and weight are from the Malaysian AJM 30 listing; regional packaging and pump configurations can vary.

Performance

The AJM 30 has a useful operating range from approximately 5 to 35 L/min.

Its published performance points include approximately:

  • 5 L/min → 30 m head
  • 10 L/min → 26 m head
  • 15 L/min → 22.5 m head
  • 20 L/min → 20 m head
  • 25 L/min → 18 m head
  • 30 L/min → 16 m head
  • 35 L/min → 14 m head

These figures demonstrate the normal centrifugal-pump relationship between flow and head: as flow increases, available head decreases. The manufacturer's hydraulic data lists the AJm30 at 0.3 kW with these operating points.

Self-Priming Jet Pump Design

The AJM 30 is a self-priming jet pump, making it particularly useful for installations where the water source is below the pump. The jet-pump arrangement allows the pump to develop suction and lift water from a well or other water source, subject to the specified suction limitation.

LEO's documentation identifies the AJm range for well-water pumping, garden irrigation, pressure boosting and supporting equipment.

The Malaysian AJM 30 specification gives a maximum suction figure of approximately 9 m, while LEO Europe's general AJm documentation specifies a maximum suction height of 8 m for its AJmS stainless-steel variant and 8 m for the cast-iron AJm documentation. Actual achievable suction height depends strongly on installation conditions, pipework, water temperature, atmospheric pressure and suction-line losses.

Stainless-Steel Impeller & AISI 304 Shaft

The AJM 30 incorporates a stainless-steel impeller and AISI 304 stainless-steel shaft. These components provide good corrosion resistance for normal clean-water applications and contribute to long-term mechanical durability.

The stainless-steel impeller is particularly useful where resistance to rust and oxidation is desired compared with standard untreated ferrous components.

Motor Construction

The AJM 30 uses a 0.3 kW / 0.4 HP, 220 V single-phase motor with copper winding.

Important motor features include:

  • Copper winding
  • Built-in thermal protector
  • Class F insulation
  • IPX4 protection
  • Maximum ambient temperature of +40°C

The built-in thermal protection helps protect the single-phase motor against overheating during abnormal operating conditions.

Pump Connections

The AJM 30 uses:

Suction/Inlet: 1"
Discharge/Outlet: 1"

The 1" connection size makes the pump convenient for domestic water systems, garden irrigation and small pressure-boosting installations.

For suction installations, the pipe should be adequately sized and kept as short and direct as practical. Excessive bends, undersized piping or air leakage on the suction side can significantly reduce pump performance.

Recommended Applications

The LEO AJM 30 is suitable for:

  1. Domestic water supply – Suitable for transferring clean water in small residential systems.
  2. Well-water lifting – The self-priming jet-pump design makes it suitable for lifting water from wells within the applicable suction limit.
  3. Garden irrigation – Suitable for sprinklers, garden watering and small irrigation systems.
  4. Pressure boosting – Can increase water pressure for domestic or light commercial applications.
  5. Water transfer – Suitable for transferring clean water between tanks and other water-storage points.
  6. Supporting equipment – Can be integrated with suitable pressure tanks, controllers and other water-supply equipment.

LEO specifically lists clean-water transfer, well-water lifting, garden irrigation and running-water pressure boosting as applications for the AJm series.

Suitable Pumping Medium

The AJM 30 is intended for clean water or liquids with physical and chemical properties similar to water.

It is therefore not intended as a solids-handling or wastewater pump. Liquids containing significant quantities of sand, sludge, fibrous material or abrasive particles should be avoided unless the manufacturer has specifically approved the application.

Operating Conditions

The pump should be operated within the manufacturer's specified limits:

  • Maximum liquid temperature: approximately +40°C
  • Maximum ambient temperature: +40°C
  • Maximum suction: approximately 8–9 m depending on the specific configuration/documentation
  • Insulation: Class F
  • Protection: IPX4

The difference in published suction figures is configuration/documentation dependent; for the standard Malaysian AJM 30 listing, 9 m is specified.

Main Advantages

The LEO AJM 30 provides:

  • Compact 0.3 kW / 0.4 HP design.
  • Self-priming jet-pump construction.
  • Up to approximately 35 L/min flow.
  • Up to approximately 30 m head.
  • Approximately 8–9 m suction capability, depending on configuration.
  • Stainless-steel impeller.
  • AISI 304 stainless-steel shaft.
  • Copper motor winding.
  • Built-in thermal protection.
  • Class F motor insulation.
  • IPX4 protection.
  • 1" suction and discharge connections.
  • Suitable for domestic water supply, irrigation and pressure boosting.

Product Dimensions

The Malaysian product specification lists the AJM 30 at approximately 200 × 180 × 400 mm with a weight of approximately 6.2 kg. These figures are useful for product catalogue and installation-planning purposes, although actual dimensions can vary between regional configurations.

Product Description

LEO AJM 30 Jet Pump 0.3kW / 0.4HP 220V is a compact self-priming water pump designed for clean-water transfer, well-water lifting, garden irrigation and pressure boosting. Powered by a 0.3 kW / 0.4 HP single-phase motor, the AJM 30 provides approximately 5–35 L/min flow with a 30–14 m head range, making it suitable for a variety of domestic and light-duty water applications.

The pump features a stainless-steel impeller, AISI 304 stainless-steel shaft and copper motor winding for durability and reliable operation. Its built-in thermal protector helps safeguard the motor against overheating, while Class F insulation and IPX4 protection provide additional electrical and thermal protection.

With 1" × 1" inlet and outlet connections and a maximum suction capability of approximately 9 m according to the Malaysian specification, the LEO AJM 30 is a practical choice for water transfer from wells, small irrigation systems, domestic pressure boosting and general clean-water applications.

SEO Product Title

LEO AJM 30 Jet Pump 0.3kW 0.4HP 220V Self-Priming Water Pump

Short Product Description

LEO AJM 30 is a 0.3kW / 0.4HP 220V self-priming jet pump designed for clean-water transfer, well-water lifting, garden irrigation and pressure boosting. It delivers approximately 5–35 L/min flow and 30–14 m head, with 1" × 1" connections, stainless-steel impeller, AISI 304 shaft, copper winding, built-in thermal protection, Class F insulation and IPX4 protection.



 Inquiry - LEO JET PUMPS - AJM 30