B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO JET PUMPS FOR DEEP WELL, GARDEN JET PUMPS - 4XCM-120SA



The LEO 4XCM-120SA is a 1.1 kW / 1.5 HP, 220–240 V single-phase stainless-steel self-priming multistage jet pump designed for domestic water supply, garden irrigation, sprinkler systems, water tank transfer, pressure boosting and suitable well-water applications. Malaysian product listings specifically identify the model as a 1.1 kW / 1.5 HP self-priming garden/deep-well jet pump.

The pump uses a four-stage hydraulic configuration, allowing it to produce substantially higher pressure than many conventional single-stage garden pumps. The 4XCM-120SA is also available as a stainless-steel version, making it appropriate for applications where corrosion resistance and durability are important.

Technical Specifications

Specification LEO 4XCM-120SA
Brand LEO
Model 4XCM-120SA
Pump Type Self-Priming Multistage Jet Pump
Series XCM
Hydraulic Stages 4 Stage
Motor Power 1.1 kW / 1.5 HP
Supply Voltage 220–240 V
Frequency 50 Hz
Phase Single Phase
Maximum Head 49 m
Maximum Flow 6.0 m³/h
Maximum Suction 8 m
Inlet / Outlet 25 / 25 mm (1" / 1")
Maximum Particle Size 1 mm
Pump Construction Stainless Steel
Shaft Stainless Steel
Impeller Multistage
Motor Winding Copper
Insulation Class F
Protection Class IPX4
Thermal Protection Built-In
Installation Surface Mounted
Priming Self-Priming
Suitable Liquid Clean Water
Cable H07RN-F, 1.5 m
Approx. Weight 9.8 kg

The published 4XCM120SA specification lists 1100 W input power, 49 m maximum head, 6.0 m³/h maximum flow, 8 m maximum suction and 25/25 mm inlet/outlet connections.

1.1 kW / 1.5 HP Motor

The 4XCM-120SA is powered by a 1.1 kW / 1.5 HP single-phase motor. Malaysian suppliers consistently list this motor rating for the model.

This power level makes the pump suitable for applications requiring more pressure and capacity than smaller domestic garden pumps.

Typical applications include:

  • Domestic water supply
  • Garden irrigation
  • Sprinkler systems
  • Water tank filling
  • Water pressure boosting
  • Shallow-well water supply
  • Small-scale agricultural irrigation
  • Clean-water transfer

Four-Stage Multistage Hydraulic Design

The 4XCM-120SA uses four hydraulic stages.

In a multistage centrifugal pump, the stages are arranged in series. Water passes through successive impellers, with each stage contributing additional pressure.

This configuration allows the pump to achieve a 49 m maximum head while maintaining a relatively compact physical design.

The four-stage configuration is particularly useful for:

  • High-pressure garden irrigation
  • Sprinkler systems
  • Elevated tanks
  • Long discharge pipelines
  • Domestic pressure boosting
  • Multi-point water supply

Maximum Head – 49 m

The 4XCM-120SA has a published maximum head of 49 m.

A 49 m water head corresponds to approximately 4.8 bar of theoretical static pressure.

However, maximum head is achieved at very low flow. As water flow increases, available head decreases.

Therefore, pump selection should be based on the actual operating point rather than simply the 49 m maximum-head figure.

The system's total dynamic head includes:

  • Vertical elevation
  • Pipe friction
  • Pipe length
  • Fittings
  • Valves
  • Filters
  • Required outlet pressure
  • Sprinkler pressure requirements

Maximum Flow – 6.0 m³/h

The published maximum flow for the 4XCM120SA is 6.0 m³/h, equivalent to approximately 100 L/min.

This makes the pump suitable for relatively demanding domestic and irrigation applications.

Actual flow will depend on system resistance.

For example:

Higher discharge head → lower flow

Lower discharge head → higher flow

The 6.0 m³/h figure should therefore be treated as the maximum rated capacity rather than the guaranteed flow at every operating condition.

Maximum Suction – 8 m

The 4XCM-120SA is specified with a maximum suction capability of 8 m.

This makes it suitable for surface pumping from:

  • Shallow wells
  • Ground tanks
  • Storage tanks
  • Rainwater tanks
  • Reservoirs

The actual achievable suction height can be affected by:

  • Water temperature
  • Atmospheric pressure
  • Suction pipe diameter
  • Suction pipe length
  • Pipe friction
  • Foot valve
  • Air leakage
  • Water-level fluctuations

For optimum performance, install the pump as close as practical to the water source.

Important Deep-Well Application Note

Although the product is marketed as a “Deep Well Jet Pump”, the published 8 m maximum suction means the 4XCM-120SA should not be treated as a conventional deep-well pump capable of directly lifting water from very deep groundwater levels.

For genuinely deep wells where the water level is substantially below the practical suction limit of a surface pump, a dedicated deep-well ejector system or submersible borehole pump is more appropriate.

This distinction is important when selecting the pump for a well installation.

Stainless-Steel Construction

The 4XCM-120SA is a stainless-steel pump, making it particularly suitable for domestic and outdoor water applications.

Stainless-steel construction provides:

  • Good corrosion resistance
  • Improved durability
  • Resistance to humid environments
  • Clean appearance
  • Suitable performance in outdoor installations
  • Reduced risk of conventional steel corrosion

This makes the 4XCM-120SA a good choice where the pump is exposed to moisture or where stainless-steel construction is preferred.

25 mm / 1" Connections

The pump is specified with 25 mm inlet and 25 mm outlet connections, equivalent to approximately 1" × 1".

These connections are convenient for common residential and garden plumbing systems.

For optimum performance, avoid unnecessarily reducing the suction-pipe diameter.

A properly sized suction line helps minimize:

  • Suction losses
  • Turbulence
  • Friction
  • Priming problems
  • Cavitation risk

Maximum Particle Size – 1 mm

The published specification indicates a maximum particle diameter of 1 mm.

The pump is therefore intended primarily for clean or relatively clean water.

It is not suitable for:

  • Sewage
  • Sludge
  • Mud
  • Heavy sand
  • Large solids
  • Fibrous wastewater
  • Abrasive slurry

Where groundwater contains sand or sediment, an appropriate filtration system should be installed.

Self-Priming Design

The self-priming configuration allows the pump to establish suction from a suitable water source after correct initial priming.

This is useful for:

  • Garden water systems
  • Shallow wells
  • Water storage tanks
  • Rainwater tanks
  • Domestic water systems

The suction line must remain airtight.

A small air leak can cause:

  • Loss of prime
  • Reduced flow
  • Poor pressure
  • Intermittent operation
  • Failure to draw water

Garden Irrigation

The 4XCM-120SA is particularly suitable for garden and landscape irrigation.

The combination of 1.5 HP motor, four-stage hydraulics and up to 49 m head provides useful pressure for sprinkler systems.

Potential applications include:

  • Lawn sprinklers
  • Garden sprinklers
  • Landscape irrigation
  • Greenhouse irrigation
  • Vegetable gardens
  • Small agricultural irrigation
  • Hose watering systems

The number of sprinklers that can operate simultaneously depends on the required flow and pressure of each sprinkler.

Domestic Water Supply

The pump can be used for domestic clean-water supply where the required operating point is within its performance curve.

Suitable applications include:

  • House water supply
  • Storage tank supply
  • Outdoor taps
  • Upper-floor water supply
  • Garden water supply
  • Pressure boosting

For automatic domestic operation, the pump can be paired with a suitable:

  • Pressure controller
  • Pressure switch
  • Pressure tank
  • Automatic pump controller

Water Pressure Boosting

The 4XCM-120SA is well suited to applications where a higher water pressure is required.

Examples include:

Ground tank → 4XCM-120SA → house

Rainwater tank → 4XCM-120SA → irrigation

Storage tank → 4XCM-120SA → sprinkler system

The multistage configuration is particularly useful when the installation requires pressure at multiple outlets or elevated locations.

Water Tank Transfer

The pump can transfer clean water between tanks where the total head and required flow are within the pump's performance range.

Common applications include:

  • Ground tank to elevated tank
  • Underground tank to house
  • Rainwater tank to garden
  • Reservoir to irrigation system
  • Storage tank to building

Before installation, calculate the total vertical lift and friction losses.

Copper Motor Winding

The motor uses copper winding, providing good electrical conductivity and reliable motor performance.

The motor should be connected using appropriately sized electrical cable and protected by suitable electrical protection.

Thermal Protection

The single-phase motor incorporates thermal protection to help protect against excessive temperature.

Potential causes of motor overheating include:

  • Excessive load
  • Restricted ventilation
  • Mechanical obstruction
  • Incorrect voltage
  • Prolonged abnormal operation
  • Excessive ambient temperature

Thermal protection is an additional safety feature and does not replace proper circuit protection.

Class F Insulation

The motor uses Class F insulation, providing good thermal resistance for normal pump operation.

This is suitable for continuous-duty water pumping when the pump is correctly selected and installed.

IPX4 Motor Protection

The motor uses IPX4 protection, providing protection against water splashing from different directions.

For outdoor installation, the pump should still be protected from:

  • Flooding
  • Standing water
  • Direct high-pressure spray
  • Submersion
  • Prolonged exposure to severe weather

Install the pump in a dry and adequately ventilated location.

1.5 m H07RN-F Cable

The published specification lists a 1.5 m H07RN-F power cable.

H07RN-F is a flexible heavy-duty rubber cable commonly used for equipment exposed to mechanical movement and demanding operating environments.

The supplied cable should still be connected to an appropriately protected electrical supply.

Suitable Applications

The LEO 4XCM-120SA is suitable for:

Domestic Water Supply
Clean-water supply for houses and small buildings.

Garden Irrigation
Sprinklers, hoses and landscape irrigation.

Pressure Boosting
Increasing pressure from storage tanks and low-pressure sources.

Water Tank Transfer
Moving water between ground and elevated tanks.

Shallow-Well Pumping
Surface pumping from shallow water sources within the 8 m suction limit.

Rainwater Systems
Filtered rainwater distribution for suitable non-potable applications.

Small Agricultural Irrigation
Supplying irrigation water where the required flow and head fall within the pump curve.

4XCM-120SA vs EKJ-802S

Feature 4XCM-120SA EKJ-802S
Motor Power 1.1 kW / 1.5 HP 0.8 kW / 1.1 HP
Voltage 220–240 V 220–240 V
Hydraulic Design 4-stage Jet pump
Max Head 49 m Approx. 38–40 m
Max Flow 6.0 m³/h Approx. 3.5–3.7 m³/h
Max Suction 8 m Approx. 7–8 m
Inlet / Outlet 25 / 25 mm Approx. 1" × 1"
Construction Stainless Steel Stainless Steel
Main Advantage Higher pressure & flow Compact garden pumping
Best For Higher-demand applications Domestic/garden applications

The 4XCM-120SA is therefore the stronger choice when the application requires higher flow, greater pressure and a more powerful 1.5 HP motor.

4XCM-120SA vs 5XCM-120SA

Feature 4XCM-120SA 5XCM-120SA
Stages 4 5
Motor 1.1 kW / 1.5 HP 1.3 kW / 1.75 HP
Max Head 49 m Higher-pressure configuration
Construction Stainless Steel Stainless Steel
Pump Type Self-Priming Multistage Self-Priming Multistage
Application Domestic / Garden / Irrigation Higher-demand water systems

Current Malaysian listings identify the 4XCM-120SA as 1.1 kW / 1.5 HP and the 5XCM-120SA as 1.3 kW / 1.75 HP.

Key Advantages

The LEO 4XCM-120SA provides:

  1. 1.1 kW / 1.5 HP motor
  2. 220–240 V single-phase operation
  3. Four-stage multistage hydraulic design
  4. 49 m maximum head
  5. 6.0 m³/h maximum flow
  6. 8 m maximum suction
  7. 25 mm / 1" inlet and outlet
  8. Stainless-steel construction
  9. Stainless-steel shaft
  10. Self-priming operation
  11. Copper motor winding
  12. Class F insulation
  13. IPX4 protection
  14. Built-in thermal protection
  15. Maximum particle size approximately 1 mm
  16. 1.5 m H07RN-F cable
  17. Suitable for clean water
  18. Suitable for domestic water supply
  19. Suitable for garden irrigation
  20. Suitable for sprinkler systems
  21. Suitable for water tank transfer
  22. Suitable for pressure boosting
  23. Suitable for shallow-well applications
  24. Suitable for suitable deep-well ejector configurations.

Installation Recommendations

For reliable operation:

  • Mount the pump on a solid, level foundation.
  • Install the pump as close to the water source as practical.
  • Keep the suction pipe short and straight.
  • Use an appropriately sized suction pipe.
  • Avoid excessive bends and restrictions.
  • Install a suitable foot valve/check valve.
  • Ensure all suction connections are airtight.
  • Prime the pump correctly before operation.
  • Never run the pump dry.
  • Ensure sufficient water supply.
  • Install appropriate electrical protection.
  • Provide proper earthing.
  • Maintain adequate motor ventilation.
  • Protect the pump against flooding.
  • Install filtration if the water contains sediment or sand.
  • Do not exceed the specified particle size.

Product Description

LEO 4XCM-120SA 1.1kW 1.5HP Stainless Steel Self-Priming Multistage Jet Pump is a high-pressure water pump designed for domestic water supply, garden irrigation, sprinkler systems, water tank transfer, pressure boosting and suitable well-water applications. Equipped with a four-stage multistage hydraulic system, the pump delivers up to 49 m maximum head and 6.0 m³/h maximum flow, with a maximum suction capability of 8 m.

The pump features stainless-steel construction, stainless-steel shaft, copper motor winding, Class F insulation, IPX4 protection, built-in thermal protection and 25 mm / 1" inlet and outlet connections. Its self-priming configuration makes it suitable for surface-mounted water systems where the water source is within the pump's practical suction capability.

With its 1.1 kW / 1.5 HP motor and four-stage high-pressure design, the LEO 4XCM-120SA is well suited to homes, gardens, irrigation systems, sprinkler installations, water tanks and clean-water pressure-boosting applications. Malaysian suppliers list the model specifically as a 1.1 kW / 1.5 HP self-priming garden/deep-well jet pump.

SEO Product Title

LEO 4XCM-120SA 1.1kW 1.5HP 220V Stainless Steel Self-Priming Multistage Jet Pump 49m Head

Short Product Description

LEO 4XCM-120SA is a 1.1kW / 1.5HP 220–240V stainless-steel self-priming multistage jet pump designed for domestic water supply, garden irrigation, sprinkler systems, water tank transfer and pressure boosting. Its four-stage hydraulic design delivers up to 49 m maximum head and 6.0 m³/h maximum flow, with up to 8 m suction capability. Featuring stainless-steel construction, stainless-steel shaft, copper motor winding, Class F insulation, IPX4 protection and built-in thermal protection, it is a reliable solution for clean-water pumping in residential, garden and small irrigation systems.



 Inquiry - LEO JET PUMPS FOR DEEP WELL, GARDEN JET PUMPS - 4XCM-120SA