B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO PERIPHERAL, SELF-PRIMING PERIPEHRAL PUMPS - XKSM 125



The LEO XKSM 125 is a compact self-priming peripheral water pump designed for small domestic water-supply, water-transfer and light-duty pressure applications. It uses a 0.125 kW (125 W / approximately 0.17 HP) single-phase motor and is capable of delivering up to 30 L/min, with a maximum head of approximately 25 m. The model has 1" × 1" suction and discharge connections and a maximum suction lift of 8 m.

LEO's official documentation identifies the XKSm family as a self-priming peripheral pump series intended for clean water and liquids with similar physical and chemical properties. Typical applications include small residential water supply, automatic sprinkler systems, small air-conditioning systems and supporting equipment.

Product Specifications

Specification LEO XKSM 125
Brand LEO
Model XKSM 125
Product Type Self-Priming Peripheral Pump
Pump Series XKSm
Motor Type Single Phase
Rated Motor Power 0.125 kW
Motor Power 125 W
Approx. Horsepower 0.17 HP
Voltage 220 V
Flow Rate 5–30 L/min
Maximum Flow 30 L/min
Head Range 25–2 m
Maximum Head 25 m
Maximum Suction Lift 8 m
Suction Connection 1"
Discharge Connection 1"
Application Fluid Clean Water / Water-Like Liquids
Pump Type Peripheral / Regenerative
Priming Type Self-Priming
Installation Surface Mounted
Electrical Supply Single Phase
Intended Duty Domestic / Light Duty Water Supply

The published Malaysian product specification for XKSM125 gives 5–30 L/min flow, 25–2 m head, 8 m maximum suction, 0.125 kW power and 1" × 1" 220 V connections.

Key Features

Self-Priming Operation
The XKSM 125 is designed as a self-priming peripheral pump. This makes it suitable for installations where the pump is positioned above the water source and needs to draw water through a suction line, provided the installation is correctly primed and the suction conditions remain within the specified limit.

Compact 125 W Motor
With only 0.125 kW of rated power, the XKSM 125 is intended for relatively small water-supply requirements rather than high-volume pumping. Its compact motor makes it appropriate where limited pumping capacity and a small physical footprint are required.

Up to 30 L/min Flow
The pump provides a flow range of approximately 5–30 L/min. The actual flow available depends on the system head, pipe length, fittings, suction conditions and other hydraulic losses.

Maximum 25 m Head
The XKSM 125 has a published maximum head of approximately 25 m. Maximum head is the pump's shut-off/near-zero-flow pressure capability; the pump should be selected according to the required operating point rather than simply using the maximum head figure.

1" Suction and Discharge Connections
Both inlet and outlet connections are specified as 1 inch, making the XKSM 125 suitable for standard small domestic water-piping installations.

Maximum 8 m Suction Lift
The published specification gives a maximum suction lift of 8 m. In practical installations, the achievable suction lift can be lower depending on pipe diameter, pipe length, air leakage, water temperature, altitude and other installation conditions.

Pump Performance

The XKSM 125 has a stated operating range of approximately 5–30 L/min with a head range of 25–2 m. In general, pump flow and head have an inverse relationship: as system flow increases, the available pump head decreases.

For example:

  • At low flow, the pump can develop close to its maximum head.
  • At higher flow, the available head decreases.
  • The maximum 30 L/min figure should therefore not be interpreted as being available at 25 m head.
  • Actual performance depends on the complete hydraulic system.

This makes the XKSM 125 more suitable for small water-transfer and domestic pressure applications than high-flow irrigation or industrial pumping.

Construction and Pump Design

The XKSM series uses a peripheral pumping principle, where the impeller transfers energy to the water through the peripheral portion of the impeller and pump chamber. This type of design is useful where relatively high pressure is required from a compact pump.

LEO's documentation for its peripheral/self-priming peripheral pump families specifies features such as copper motor windings, brass impeller construction, AISI 304 shafting, built-in thermal protection for single-phase motors, anti-rust treatment of wetted components, Class F insulation and IP-rated motor protection, although exact construction details should be verified against the specific XKSM 125 production revision before being used as a contractual specification.

Recommended Applications

The LEO XKSM 125 is suitable for:

  • Small domestic water supply
  • Household water transfer
  • Water transfer from storage tanks
  • Small overhead tank filling systems
  • Small garden watering systems
  • Small automatic sprinkler systems
  • Light-duty irrigation
  • Small water pressure applications
  • Small air-conditioning support systems
  • General clean-water transfer
  • Supporting equipment requiring a compact water pump

LEO describes the XKSm family for transferring clean water or liquids with physical and chemical properties similar to water, with applications including small living-water supply, automatic sprinkler systems and small air-conditioning systems.

Advantages of XKSM 125

  1. Self-priming design – suitable for suction-type installations.
  2. Compact 125 W motor – appropriate for small pumping requirements.
  3. Maximum 30 L/min flow – adequate for many light domestic applications.
  4. Maximum 25 m head – provides useful pressure from a compact pump.
  5. 8 m maximum suction lift – suitable for many small tank and well-type installations when correctly installed.
  6. 1" × 1" connections – compatible with common small water-piping systems.
  7. Single-phase 220 V supply – convenient for typical residential electrical installations.
  8. Peripheral pump construction – designed to produce relatively high head from a small motor.

Installation Considerations

For reliable operation, the suction pipe should be properly sealed to prevent air entering the system. The suction line should also be appropriately sized and kept as short and direct as practical. A suitable foot valve or check valve may be required depending on the installation arrangement.

The pump should be used with clean water or compatible water-like liquids. It should not be selected for sewage, abrasive slurry, heavily contaminated water, or liquids containing significant suspended solids unless LEO specifically approves the application.

The stated 8 m suction lift is a maximum specification, not necessarily the recommended continuous operating condition for every installation. Actual suction performance can be affected by atmospheric pressure, water temperature, elevation and pipe losses.

Website Product Description

LEO XKSM 125 Self-Priming Peripheral Pump 0.125kW / 0.17HP is a compact and efficient water pump designed for small domestic water supply, water transfer, garden watering and light-duty pressure applications. Powered by a 125 W single-phase motor, the XKSM 125 delivers a flow range of approximately 5–30 L/min and provides a maximum head of 25 metres, making it suitable for installations requiring moderate water pressure from a compact pump.

The XKSM 125 features a self-priming peripheral pump design, allowing it to draw clean water from a suitable lower-level water source when installed correctly. It has a maximum suction lift of 8 metres and is equipped with 1" suction and 1" discharge connections, providing convenient compatibility with standard domestic water-piping systems.

Designed for clean water and liquids with properties similar to water, the LEO XKSM 125 is suitable for small household water systems, storage-tank transfer, automatic sprinkler systems, garden watering, small irrigation installations and other light-duty water-pumping applications. Its compact construction and low-power single-phase motor make it a practical choice for applications where space, energy consumption and pumping capacity need to remain relatively small.



 Inquiry - LEO PERIPHERAL, SELF-PRIMING PERIPEHRAL PUMPS - XKSM 125