B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SOLAR BOREHOLE PUMPS - MONO SOLAR PANEL (590W)



The LEO Mono Solar Panel 590W is a high-output monocrystalline photovoltaic (PV) panel designed as part of LEO's solar borehole/deep-well pumping system. It supplies DC electrical power to compatible LEO solar pump systems, making it suitable for water extraction from wells and reservoirs in locations where grid electricity is unavailable or unreliable. LEO's LPS solar borehole pump range is specifically intended for agriculture irrigation, livestock watering, domestic water lifting, clear-water supply and off-grid solar pumping.

Product Specifications

Specification LEO Mono Solar Panel 590W
Brand LEO
Product Type Monocrystalline Solar Panel
Application Solar Borehole / Deep-Well Pumping
Rated Peak Power (Pmax) 590 W
Maximum Power Voltage (Vmp) 43.0 V
Maximum Power Current (Imp) 14.0 A
Open-Circuit Voltage (Voc) 51.0 V
Short-Circuit Current (Isc) 14.0 A
Cell Type Monocrystalline (Mono)
Panel Dimensions 2279 × 1134 × 30 mm
Panel Weight 32 kg
Electrical Output DC
Intended System LEO Solar Borehole Pump
Typical Application Water pumping / Irrigation / Domestic water supply
Mounting Solar-panel mounting structure required

The 590 W, 43.0 V Vmp, 14.0 A Imp, 51.0 V Voc and 14.0 A Isc specifications are published for the LEO solar borehole pump package.

590W High-Power Solar Panel

With a rated output of 590 watts, this panel is designed to provide a substantial amount of DC power for compatible solar pumping equipment.

The rated electrical parameters are:

Pmax: 590 W
Vmp: 43.0 V
Imp: 14.0 A
Voc: 51.0 V
Isc: 14.0 A

The theoretical relationship between the operating voltage and current is approximately:

43 V × 14 A = 602 W

The small difference from the stated 590 W rated output is normal because manufacturer-rated maximum-power values are based on standardized PV test conditions and actual panel electrical characteristics.

Monocrystalline Solar Cell Technology

The panel uses monocrystalline solar cells, commonly selected for solar pumping applications because they provide high power output within a relatively compact panel area.

The panel measures:

2279 mm × 1134 mm × 30 mm

with a weight of approximately:

32 kg.

This makes it suitable for permanent installation on a properly engineered rooftop, ground-mounted frame or dedicated solar-panel structure.

Electrical Characteristics

The key electrical parameters are:

Electrical Parameter Specification
Maximum Power 590 W
Voltage at Maximum Power 43.0 V
Current at Maximum Power 14.0 A
Open-Circuit Voltage 51.0 V
Short-Circuit Current 14.0 A

Vmp is the approximate voltage at which the panel produces its rated maximum power under standard test conditions.

Imp is the current generated at that maximum-power operating point.

Voc is the panel's open-circuit voltage when no electrical load is connected.

Isc is the current measured under short-circuit test conditions.

The actual operating voltage and current vary according to sunlight intensity, panel temperature, wiring, controller operation and system load.

Designed for LEO Solar Borehole Pump Systems

The 590W panel is listed as an add-on/component for LEO's solar borehole/deep-well pump package. The associated LEO system includes pump packages such as:

  • 4LPS2/9 – 1.0 HP / 100 m head
  • 4LPS2/13 – 2.0 HP / 132 m head
  • 4LPS3/8 – 1.5 HP / 82 m head
  • 4LPS5/12 – 2.5 HP / 136 m head
  • 4LPS14/4 – 3.0 HP / 50 m head

The solar panel quantity and electrical arrangement therefore depend on the particular pump package selected. A single 590W panel should not automatically be assumed to power every pump in this range.

Solar Pumping System

A typical LEO solar borehole pumping arrangement consists of:

Solar Panels → Solar Pump Controller → Submersible Borehole Pump → Rising Pipe → Storage Tank / Irrigation System

The solar panels generate DC power during daylight hours. The controller regulates the electrical supply to the pump and manages the available solar energy.

LEO's LPS system incorporates an intelligent controller with functions including:

  • MPPT
  • DSP technology
  • Dry-running protection
  • Over-current protection
  • Over-voltage protection
  • Overload protection
  • Intelligent speed control
  • AC/DC capability on compatible systems
  • IP68 protection for the pump motor/controller arrangement

MPPT Technology

The associated LEO solar borehole pump system uses MPPT (Maximum Power Point Tracking) technology.

MPPT allows the controller to continuously adjust the electrical operating point so that the solar array can deliver useful power under changing solar conditions.

This is particularly important for water pumping because solar irradiance changes throughout the day.

For example:

Morning: Lower solar irradiance → lower available power → reduced pump speed/output

Midday: Strong solar irradiance → higher available power → increased pump speed/output

Afternoon: Solar irradiance decreases → pump output gradually decreases

This allows the pumping system to make use of changing solar conditions without requiring the panel to operate at one fixed power level throughout the day.

Dimensions

The panel dimensions are:

Length: 2,279 mm
Width: 1,134 mm
Thickness: 30 mm

Approximate panel footprint:

2.585 m²

Panel weight:

32 kg.

A mounting structure should be designed to safely support the panel's weight as well as wind and environmental loads.

Solar Panel Installation

For a solar borehole pump installation, the panel should be mounted in a location with minimal shading.

Avoid shading from:

  • Trees
  • Buildings
  • Water tanks
  • Poles
  • Roof structures
  • Other solar panels
  • Nearby vegetation

Partial shading can reduce the output of the PV array and may consequently reduce pump performance.

The panel orientation and tilt should be selected according to the installation site and solar-resource conditions.

Application

The LEO solar borehole pumping system is designed for applications including:

  • Borehole water extraction
  • Deep-well water pumping
  • Agriculture irrigation
  • Livestock watering
  • Domestic water lifting
  • Rural water supply
  • Clear-water transfer
  • Off-grid water pumping
  • Remote-area water supply
  • Reservoir water transfer

LEO specifically lists remote areas without stable grid electricity, agriculture, livestock feeding, domestic water lifting, clear-water supply from wells/reservoirs and off-grid solar pumping as LPS applications.

Agriculture Irrigation

The 590W solar panel can form part of an off-grid irrigation system when correctly matched to the pump and required water output.

Typical arrangement:

Solar Array → Controller → Borehole Pump → Storage Tank → Irrigation Network

This configuration can be useful for farms where extending grid electricity to a borehole is impractical.

The actual irrigation capacity depends on:

  • Pump model
  • Borehole depth
  • Dynamic water level
  • Total head
  • Pipe diameter
  • Pipe length
  • Required discharge pressure
  • Solar irradiance
  • Number of solar panels
  • Pump operating schedule

Therefore, the 590W panel rating alone cannot be used to determine litres per hour of water production.

Borehole Pumping

The panel is particularly relevant to LEO's LPS hybrid AC/DC solar borehole pump range. LEO describes these pumps as suitable for obtaining clear water from wells and reservoirs and for off-grid solar pumping.

The pump is submerged in the borehole while the solar array is installed above ground.

This arrangement has several advantages:

  • No need for conventional surface suction
  • Suitable for deep water sources
  • Reduced suction limitations
  • Direct water lifting from the borehole
  • Good suitability for remote installations

Important System-Sizing Consideration

The 590W rating refers to the solar panel's maximum rated electrical output, not the water-pumping capacity.

Water output must be determined from the complete pump system.

For example, two systems using the same 590W panel could produce different water volumes if they have different:

  • Pump efficiencies
  • Borehole depths
  • Static water levels
  • Total heads
  • Pipe sizes
  • Pump curves
  • Controller settings

Therefore, when selling or specifying this panel as part of a package, it is preferable to identify the exact LEO pump model and number of 590W panels required.

Construction and Handling

At approximately 32 kg per panel, proper handling is required during transportation and installation.

Recommended precautions include:

  • Use suitable lifting procedures.
  • Do not lift the panel by electrical cables.
  • Avoid placing excessive pressure on the glass surface.
  • Protect the panel from impact.
  • Use compatible mounting clamps.
  • Maintain correct panel alignment.
  • Ensure mounting rails are structurally adequate.
  • Provide appropriate grounding/earthing according to the installation design.
  • Protect DC cabling from mechanical damage and weather exposure.

Electrical Protection

A complete solar pumping installation should be designed with appropriate DC electrical protection.

Depending on the system configuration, this can include:

  • DC isolator
  • String protection
  • Surge protection
  • Appropriate DC-rated connectors
  • Correct cable sizing
  • Earthing/grounding
  • Controller protection
  • Lightning protection where required by the installation

The exact protection arrangement depends on the number of panels, series/parallel configuration and LEO controller specifications.

Advantages

The LEO Mono Solar Panel 590W offers several advantages for solar borehole pumping:

  1. 590 W rated peak power
  2. Monocrystalline cell technology
  3. High operating voltage of 43.0 V
  4. 14.0 A maximum-power current
  5. 51.0 V open-circuit voltage
  6. Large-format panel design
  7. Suitable for LEO solar borehole pump systems
  8. Suitable for off-grid water pumping
  9. Suitable for agricultural irrigation
  10. Suitable for domestic water lifting
  11. Suitable for livestock water supply
  12. No grid electricity required when used in a correctly sized off-grid system
  13. Compatible with LEO's solar pumping controller technology
  14. Suitable for remote water-supply applications
  15. 32 kg construction for permanent solar installation

Technical Data Summary

Category Details
Product LEO Mono Solar Panel 590W
Technology Monocrystalline
Rated Power 590 W
Vmp 43.0 V
Imp 14.0 A
Voc 51.0 V
Isc 14.0 A
Dimensions 2279 × 1134 × 30 mm
Weight 32 kg
Output DC
Primary Application Solar Borehole Pumping
Compatible System LEO LPS Solar Borehole Pump System
Applications Irrigation, wells, reservoirs, livestock, domestic water supply
Installation Ground/Roof Solar Mounting Structure

These specifications are based on the published LEO solar borehole pump package information.

Website Product Description

LEO MONO SOLAR PANEL 590W is a high-output monocrystalline photovoltaic panel designed for use with compatible LEO solar borehole and deep-well pumping systems. With a rated peak power of 590W, maximum power voltage of 43.0V and maximum power current of 14.0A, the panel provides DC solar energy for off-grid water-pumping applications. The panel has an open-circuit voltage of 51.0V and short-circuit current of 14.0A.

Measuring 2279 × 1134 × 30mm and weighing approximately 32kg, the panel is designed for permanent solar installation as part of a correctly sized photovoltaic pumping array. It can be used with LEO's LPS solar borehole pump systems for agricultural irrigation, livestock watering, domestic water lifting, clear-water supply from wells or reservoirs and remote off-grid water pumping.

LEO's compatible solar borehole pumping systems incorporate intelligent control technologies including MPPT, DSP, dry-running protection, overload protection, over-current/over-voltage protection and intelligent speed control, allowing the pump system to make effective use of variable solar energy throughout the day.

SEO Product Title

LEO MONO SOLAR PANEL 590W – Monocrystalline Solar Panel for Solar Borehole Pump

SEO Meta Description

LEO Mono Solar Panel 590W with 43V Vmp, 14A Imp and 51V Voc. Monocrystalline solar panel for LEO solar borehole pumps, irrigation, wells and off-grid water supply.



 Inquiry - LEO SOLAR BOREHOLE PUMPS - MONO SOLAR PANEL (590W)