The LEO LDW-6-55-1100E is a 1.5 HP / 1.1 kW intelligent deep well submersible pump designed for automatic water extraction from deep wells, reservoirs and boreholes. It is a multistage centrifugal pump with an integrated intelligent controller that provides automatic start/stop operation, dry-run protection and a built-in non-return valve. LEO specifies the LDW series for deep-well water transfer, domestic water supply, garden irrigation and agricultural irrigation.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Model | LDW-6-55-1100E |
| Pump Type | Intelligent Deep Well / Borehole Submersible Pump |
| Motor Power | 1.1 kW / 1.5 HP |
| Power Input | 1.1 kW |
| Power Supply | 230 V |
| Maximum Flow | 100 L/min / 6 m³/h |
| Rated Flow | 50 L/min / 3 m³/h |
| Maximum Head | 55 m |
| Rated Head | 46 m |
| Maximum Pressure | Approximately 5.5 bar |
| Maximum Immersion Depth | 19 m |
| Outlet Size | 1 inch |
| Pump Diameter | 98 mm / approximately 4-inch class |
| Minimum Well Diameter | 4 inches |
| Maximum Water Temperature | 35°C |
| Maximum Particle Size | 1 mm |
| Protection Class | IPX8 |
| Cable Length | 22 m |
| Maximum Current | 5.40 A |
| Pump Construction | Multistage centrifugal |
| Impeller Material | Noryl |
| Dry-Run Protection | Yes |
| Automatic Thermal Protection | Yes |
| Non-Return Valve | Integrated |
| Float Switch | No |
| Capacitor | Integrated |
| Speed Control | No |
| Drinking Water Certification | No |
The published technical specifications list 100 L/min maximum flow, 55 m maximum head, 50 L/min rated flow at 46 m rated head, 230 V supply, 19 m maximum immersion depth, 1-inch outlet, 22 m cable and IPX8 protection.
Intelligent Automatic Operation
The LDW-6-55-1100E incorporates an intelligent control device for automatic pump operation. The system is designed to automatically switch the pump on and off according to the water-demand conditions, reducing the need for a separate manual switching arrangement.
This makes the pump particularly suitable for applications where water is required automatically, such as household water supply, tank filling and irrigation systems.
Built-In Dry-Run Protection
A major feature of the LDW-E series is its integrated dry-run protection. If the pump does not have sufficient water available, the protection system can stop the pump to help prevent damage caused by running without adequate water. Automatic thermal protection is also specified.
This is especially useful for deep-well installations where water levels can fluctuate.
High-Pressure Multistage Design
The LDW-6-55-1100E uses a multistage centrifugal configuration to generate substantially higher pressure than a basic single-stage pump. Its maximum head is 55 metres, while the published rated operating point is 50 L/min at 46 metres head.
The maximum-flow figure of 100 L/min should therefore not be interpreted as the flow available at 55 m head. Actual flow depends on the system's total dynamic head, pipe diameter, pipe length, fittings and elevation.
Stainless-Steel Construction
The pump is constructed with a stainless-steel pump body, with a high-quality mechanical seal specified to support durability in submerged service. The multistage construction provides the pressure required for deep-well water extraction and pressurised water delivery.
The pump's approximately 98 mm diameter allows it to fit into a borehole with a minimum diameter of approximately 4 inches, subject to the actual borehole casing and installation clearance.
Non-Return Valve
An integrated non-return valve helps prevent water from flowing back through the pump after it stops. This helps maintain pressure in the discharge system and reduces unnecessary backflow.
Protection and Reliability
The LDW-6-55-1100E has several features intended to protect the pump during operation:
- IPX8 protection for continuous submerged operation.
- Dry-run protection to help prevent operation without sufficient water.
- Automatic thermal protection against excessive motor temperature.
- Integrated non-return valve to reduce backflow.
- High-quality mechanical seal for improved service life.
- Stainless-steel pump body for corrosion resistance.
- Water-cooled motor for submerged operation.
Performance Information
The pump is rated for a maximum flow of 100 L/min (6 m³/h) and a maximum head of 55 m. Its published rated operating point is 50 L/min at 46 m head.
This makes it suitable for systems requiring a combination of moderate water volume and relatively high delivery pressure.
For example, the pump can be used to transfer water from a deep well to an elevated tank or supply point where the system requires pressure in addition to vertical lifting. The actual usable flow must always be determined from the pump curve and the complete installation conditions.
Suitable Applications
The LEO LDW-6-55-1100E is suitable for:
- Deep well water extraction
- Borehole water pumping
- Domestic water supply
- Residential water-pressure applications
- Water tank filling
- Garden irrigation
- Agricultural irrigation
- Small irrigation systems
- Farm water supply
- Water transfer from reservoirs
- Rural water-supply systems
- General clean-water pumping
LEO specifically identifies deep-well water transfer, domestic water supply, garden irrigation and agricultural irrigation as applications for the LDW intelligent deep-well pump series.
Installation Requirements
The pump is designed for submerged installation. The maximum immersion depth listed for the LDW-6-55-1100E is 19 m. It should be installed in an adequately sized borehole, with a minimum well diameter of approximately 4 inches.
The pump should have adequate water around the motor for cooling and should not be operated outside the specified water-temperature and immersion limits. The published maximum liquid temperature is 35°C.
The pump is primarily intended for clean water without abrasive particles. Published specifications allow particles up to approximately 1 mm, but water containing significant quantities of sand or abrasive material can increase wear on the impellers, mechanical seal and other hydraulic components.
Cable and Installation Convenience
The LDW-6-55-1100E is supplied with a 22-metre cable, providing useful installation length for deep-well applications. The compact approximately 98 mm pump diameter allows installation in 4-inch-class boreholes.
Product Advantages
- 1.5 HP / 1.1 kW motor provides increased pumping capacity for deeper or higher-pressure applications.
- 55 m maximum head allows water to be lifted through significant vertical elevations.
- 100 L/min maximum flow provides substantial water delivery capacity.
- 46 m rated head at 50 L/min provides a useful high-pressure operating point.
- Intelligent automatic control provides automatic on/off operation.
- Dry-run protection helps protect the pump when adequate water is unavailable.
- Automatic thermal protection provides additional motor protection.
- Multistage centrifugal design provides high discharge pressure.
- Stainless-steel construction provides durability in submerged applications.
- Integrated non-return valve helps prevent backflow.
- IPX8 protection is suitable for submerged operation.
- 22 m cable facilitates deep-well installation.
- 4-inch-class compact design allows installation in relatively narrow boreholes.
SEO Product Description
LEO LDW-6-55-1100E Intelligent Deep Well Pump 1.5HP 1.1kW is a high-pressure multistage submersible borehole pump designed for efficient water extraction from deep wells and reservoirs. Powered by a 1.1 kW / 1.5 HP motor, the pump delivers up to 100 L/min (6 m³/h) with a maximum head of 55 metres and a rated operating point of 50 L/min at 46 metres head. The intelligent control system provides automatic start/stop operation, while integrated dry-run and thermal protection help protect the pump during demanding operating conditions. With a stainless-steel body, IPX8 protection, integrated non-return valve and 22 m cable, the LDW-6-55-1100E is suitable for domestic water supply, garden irrigation, agricultural irrigation, tank filling and deep-well water transfer.
Short Product Description
LEO LDW-6-55-1100E 1.5HP Intelligent Deep Well Pump is a 1.1 kW multistage submersible pump with a maximum flow of 100 L/min and maximum head of 55 m. Featuring automatic intelligent control, dry-run protection, thermal protection, stainless-steel construction, IPX8 protection and a 22 m cable, it is designed for deep-well water supply, domestic applications, garden irrigation and agricultural irrigation.
Inquiry - LEO INTELLIGENT DEEP WELL PUMPS - LDW-6-55-1100E