The LEO XSP 42-17/2.2I is a high-capacity 3 HP / 2.2 kW sewage submersible pump designed for moving large volumes of wastewater, sewage, dirty water and liquids containing suspended solids. It is intended for industrial, commercial, municipal, construction, residential and agricultural drainage applications.
LEO's published XSP specifications list this model with a 2.2 kW motor, 3 HP rating, 220 V / 50 Hz single-phase supply, maximum flow of 700 L/min, maximum head of 17 m and a 75 mm / 3-inch discharge connection. The manufacturer also lists a maximum particle size of 20 mm for this model.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Model | XSP 42-17/2.2I |
| Pump Type | Sewage Submersible Pump |
| Motor Power | 2.2 kW |
| Motor Rating | 3 HP |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Maximum Flow | 700 L/min |
| Maximum Flow | 42 m³/h |
| Maximum Head | 17 m |
| Discharge Outlet | 75 mm / 3" |
| Maximum Particle Size | 20 mm |
| Maximum Immersion Depth | 5 m |
| Maximum Liquid Temperature | 40°C |
| Liquid pH Range | 4–10 |
| Maximum Liquid Density | Approx. 1.2 × 10³ kg/m³ |
| Motor Winding | Copper |
| Motor Shaft | Stainless-Steel Welded Shaft |
| Thermal Protection | Built-In |
| Insulation Class | B |
| Protection Class | IP68 |
| Mechanical Seal | Carbon / Ceramic |
| Pump Dimensions | Approx. 585 × 350 × 245 mm |
| Installation | Fully Submersible |
| Float Switch | Available configuration |
LEO's technical table gives the XSP42-17/2.2i a 75 mm outlet, 700 L/min maximum flow, 17 m maximum head and 20 mm maximum particle size. The listed dimensions are approximately 585 × 350 × 245 mm, with a product weight of approximately 29.7 kg.
High-Capacity Wastewater Pumping
The main characteristic of the XSP42-17/2.2I is its high-volume pumping capability. With a maximum flow of 700 L/min, the pump can theoretically move up to approximately 42 m³/h under low-resistance conditions.
This makes it considerably more suitable for large drainage pits, sewage collection systems and industrial wastewater applications than smaller 0.18–1.5 kW sewage pumps.
The pump has a maximum head of 17 m, making it suitable for systems requiring substantial vertical lifting while still maintaining a high flow capacity.
It is important to distinguish maximum flow from operating flow. The 700 L/min figure is a maximum-flow specification; the pump will deliver less flow as total system head increases.
3 HP / 2.2 kW Motor
The XSP42-17/2.2I is powered by a 2.2 kW / 3 HP single-phase motor operating at 220 V / 50 Hz. Malaysian product listings confirm the 3 HP / 2200 W configuration.
The higher motor rating gives the pump the power required to handle large wastewater volumes and overcome higher discharge-system resistance.
The motor uses copper windings and includes a built-in thermal protector. The published insulation class is B, while the motor is rated IP68 for submerged operation.
3-Inch / 75 mm Discharge
The pump uses a 75 mm / 3-inch discharge outlet. This relatively large outlet is appropriate for the pump's high flow capacity and helps reduce unnecessary hydraulic losses when the discharge system is correctly sized.
A properly sized discharge pipe is particularly important for this model. Using an undersized hose can create excessive friction losses, reduce actual flow and increase the load on the pump.
For high-volume applications, the discharge line should generally be designed around the required duty flow rather than simply matching the pump outlet with a smaller hose.
20 mm Particle Handling
The XSP42-17/2.2I is designed for wastewater containing suspended solids and can accommodate particles up to approximately 20 mm according to published specifications.
This allows the pump to handle substantially dirtier water than a conventional clean-water submersible pump.
However, 20 mm maximum particle size does not mean that any 20 mm object is suitable for continuous pumping. Long fibres, ropes, cloth, plastics, large debris and abrasive materials can still cause clogging or accelerated wear.
Where the wastewater contains significant solid debris, a suitable screening arrangement should be considered.
Sewage and Wastewater Applications
The XSP42-17/2.2I is intended for demanding wastewater drainage applications. LEO's XSP series application information includes:
- Factory wastewater drainage
- Construction-site drainage
- Commercial wastewater drainage
- Municipal sewage-treatment drainage
- Residential drainage stations
- Municipal projects
- Agricultural drainage
- Field irrigation
- Methane-pool drainage
These applications are also identified in Malaysian listings for the XSP42-17/2.2I.
A LEO product listing also describes the pump for transferring sewage, sludge, dirty water and liquids containing impurities in agricultural, domestic, gardening, industrial, mining and construction applications.
IP68 Protection
The XSP42-17/2.2I features IP68 protection, making it suitable for submerged operation. The pump is designed to operate while installed directly inside the wastewater, sewage pit or drainage tank, within the specified immersion limits.
Correct installation remains important. Electrical connections should be properly protected, and the pump should be operated according to the manufacturer's immersion and environmental specifications.
Maximum Immersion Depth
The specified maximum immersion depth is 5 metres.
This makes the pump suitable for many drainage pits, sewage tanks, collection sumps and wastewater stations. The specified depth should not be exceeded because increasing external pressure and installation conditions can affect the mechanical seal, motor housing and electrical components.
Thermal Protection
The motor incorporates a built-in thermal protector. This helps protect the motor from excessive temperature caused by overload or abnormal operating conditions.
Thermal protection should not be considered a replacement for correct electrical installation. A suitable circuit breaker and other required electrical protection should be provided according to the installation and applicable Malaysian electrical requirements.
Stainless-Steel Shaft
The motor uses a stainless-steel welded shaft, which provides improved corrosion resistance and durability in wet wastewater environments. LEO's material information also specifies stainless steel for several pump components, with a carbon/ceramic mechanical seal and NBR O-ring.
The mechanical seal is particularly important because it helps prevent wastewater from entering the motor chamber.
Operating Conditions
The published operating conditions for this model include:
- Maximum immersion depth: 5 m
- Maximum liquid temperature: 40°C
- Liquid pH: 4–10
- Maximum liquid density: approximately 1.2 × 10³ kg/m³
- Insulation class: B
- Protection class: IP68
- Maximum particle size: 20 mm
The pump should be used only with liquids compatible with these conditions.
It is intended primarily for wastewater, sewage and dirty-water applications. Highly corrosive chemicals, solvents, oils or liquids outside the specified temperature and chemical range should not be pumped without confirming material compatibility.
Float-Switch Operation
The XSP42-17/2.2I is available with a float switch, allowing automatic water-level control. A Malaysian supplier specifically lists the XSP42-17/2.2I with a floating switch.
The basic operating sequence is:
Water level rises → Float switch activates → Pump starts → Water level falls → Float switch deactivates → Pump stops
This is particularly useful for sewage pits, drainage sumps and wastewater collection tanks where the pump needs to operate automatically according to liquid level.
Performance and System Design
The 700 L/min maximum flow and 17 m maximum head describe the pump's hydraulic capability, but they should not be treated as simultaneous performance figures.
For actual pump selection, calculate:
Total Dynamic Head = Static Head + Pipe Friction Loss + Fitting Losses + Required Discharge Pressure
For example, a system with a 10 m vertical lift may require more than 10 m of pump head once pipe friction and fittings are included.
The required duty point should therefore be checked against the manufacturer's pump performance curve before final installation.
Typical Installation
A typical application can be arranged as:
Sewage collection pit → LEO XSP42-17/2.2I → 3" discharge pipe → drainage/treatment/collection point
The pump is installed inside the collection pit or tank and operates submerged.
For high-volume drainage, the discharge pipe should be adequately sized and supported. Excessive bends, restrictions and long undersized hoses can substantially reduce the actual flow rate.
A non-return valve may also be incorporated into the discharge system where required to prevent wastewater from flowing back into the collection pit after the pump stops.
Suitable Applications
The LEO XSP42-17/2.2I is particularly suitable for:
Industrial
- Factory wastewater drainage
- Industrial wastewater collection
- Production-facility drainage
- Large wastewater sumps
Construction
- Construction-site drainage
- Excavation drainage
- Temporary wastewater removal
- Large drainage pits
Commercial
- Commercial building wastewater
- Shopping and facility drainage
- Large collection tanks
- Commercial sewage stations
Municipal
- Sewage-treatment plants
- Municipal drainage stations
- Wastewater collection systems
- Drainage infrastructure
Residential
- Large residential sewage stations
- Sewage collection tanks
- Drainage pits
- Septic-system wastewater transfer
Agricultural
- Farm drainage
- Field irrigation
- Agricultural wastewater
- Dirty-water transfer
Main Product Advantages
- 3 HP / 2.2 kW motor for high-capacity wastewater pumping.
- 700 L/min maximum flow for large-volume drainage.
- 42 m³/h maximum flow class for high-volume applications.
- 17 m maximum head for moderate-to-high lifting requirements.
- 3-inch / 75 mm discharge suitable for high flow.
- 20 mm particle handling capability for wastewater containing suspended solids.
- IP68 protection for submerged operation.
- Built-in thermal protection for motor protection.
- Copper motor winding for reliable operation.
- Stainless-steel welded shaft for improved corrosion resistance.
- 5 m maximum immersion depth.
- 40°C maximum liquid temperature.
- Automatic float-switch configuration for water-level control.
- Suitable for industrial, municipal, commercial, residential, construction and agricultural applications.
Product Details Summary
The LEO XSP 42-17/2.2I is a 3 HP / 2.2 kW high-capacity sewage submersible pump designed for moving large quantities of wastewater, sewage and dirty water containing suspended solids. Operating at 220 V / 50 Hz single phase, it delivers a maximum flow of 700 L/min (42 m³/h) with a maximum head of 17 metres. The pump features a 3-inch / 75 mm discharge outlet and can handle particles up to 20 mm. Its IP68 motor, copper winding, stainless-steel welded shaft and built-in thermal protection make it suitable for demanding submerged drainage applications. With a maximum immersion depth of 5 m and maximum liquid temperature of 40°C, the pump is suitable for factory wastewater, construction sites, commercial facilities, municipal sewage systems, residential drainage stations, agricultural drainage and other high-volume wastewater applications.
SEO Product Title
LEO XSP 42-17/2.2I Sewage Submersible Pump 3HP 2.2kW – 700L/min, 17M Head
SEO Product Description
LEO XSP 42-17/2.2I Sewage Submersible Pump is a high-capacity 3HP / 2.2kW wastewater and sewage pump designed for demanding drainage applications. Operating at 220V/50Hz single phase, it delivers up to 700L/min (42m³/h) with a maximum head of 17 metres and features a 3-inch / 75mm discharge outlet. Designed to handle wastewater containing suspended solids, the pump supports particles up to 20mm and incorporates IP68 protection, built-in thermal protection, copper motor winding and a stainless-steel welded shaft. With a maximum immersion depth of 5 metres and maximum liquid temperature of 40°C, the LEO XSP42-17/2.2I is suitable for factory wastewater drainage, construction sites, commercial facilities, municipal sewage-treatment systems, residential drainage stations, agricultural drainage and high-volume wastewater transfer.
Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - XSP 42-17/2.2I