The LEO LSWM 25A is a compact 0.25 HP / 0.18 kW single-phase sewage submersible pump designed for wastewater drainage, sewage pits, drainage tanks and dirty-water applications. LEO's technical documentation identifies the LSWm25A as part of its LSW sewage-pump range, featuring automatic operation with a float switch and the ability to handle particles up to 15 mm.
For the LSWM25A, published Malaysian specifications identify a 220 V / 50 Hz supply, 1¼-inch (32 mm) outlet, maximum flow of 133 L/min, maximum head of 7 m and maximum immersion depth of 5 m.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Model | LSWM 25A |
| Pump Type | Sewage Submersible Pump |
| Series | LSWm |
| Motor Power | 0.18 kW |
| Motor Rating | 0.25 HP |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Maximum Flow | 133 L/min |
| Maximum Flow | Approx. 7.98 m³/h |
| Maximum Head | 7 m |
| Outlet Size | 1¼" / 32 mm |
| Maximum Particle Size | 15 mm |
| Maximum Immersion Depth | 5 m |
| Maximum Liquid Temperature | 40°C |
| Liquid pH Range | 4–10 |
| Motor Winding | Copper |
| Shaft Material | AISI 304 Stainless Steel |
| Thermal Protection | Built-In |
| Insulation Class | B / F depending on catalog revision |
| Protection Class | IP68 / IPX8 depending on catalog revision |
| Operation | Automatic with Float Switch |
| Installation | Fully Submersible |
LEO's current European technical sheet specifies the LSWm25(A) at 0.18 kW / 0.25 HP, 220 V/50 Hz, G1.5 outlet, 9.5 m³/h maximum flow and 8.5 m maximum head. Other LEO documentation and Malaysian listings identify the LSWM25A/XSP8-7/0.18I configuration at 133 L/min and 7 m head. Because LEO has published different specifications across catalog revisions/market configurations, the actual nameplate and supplied product should be treated as the final reference for a specific unit.
Compact Sewage Pump Design
The LSWM25A is designed to be installed directly inside the wastewater or sewage collection area. The submerged configuration means the pump does not require a conventional surface-mounted suction arrangement.
This is particularly useful for:
- Sewage collection pits
- Drainage sumps
- Wastewater tanks
- Septic systems
- Basement drainage
- Small commercial drainage systems
- Residential wastewater stations
LEO describes its submersible sewage pumps for drainage, sewage pumping and general industrial pumping applications.
0.25 HP / 180 W Motor
The LSWM25A uses a compact 0.18 kW / 0.25 HP motor, making it suitable for smaller wastewater drainage systems where a large industrial pump is unnecessary.
The motor uses copper winding and incorporates a built-in thermal protector. The stainless-steel shaft is specified as AISI 304 in Malaysian product documentation.
The thermal protection helps protect the motor against excessive temperature caused by overload or abnormal operating conditions.
Flow Capacity
The commonly listed LSWM25A/XSP8-7/0.18I configuration provides a maximum flow of 133 L/min, equivalent to approximately 7.98 m³/h.
This makes the pump suitable for quickly removing wastewater from relatively small collection pits and tanks.
Actual flow depends on the total system head. As discharge height, pipe length and friction losses increase, the available flow will decrease.
The maximum flow figure should therefore not be interpreted as the flow available at maximum head.
7-Metre Maximum Head
The commonly listed LSWM25A/XSP8-7/0.18I specification gives a maximum head of 7 m.
This makes the pump suitable for relatively low-head drainage applications such as:
- Sump drainage
- Basement drainage
- Small sewage tanks
- Drainage pits
- Residential wastewater collection
- Short discharge lines
For installations requiring higher discharge elevations or long discharge pipelines, the total dynamic head should be calculated before selecting the pump.
1¼-Inch / 32 mm Discharge
The LSWM25A is commonly supplied with a 1¼-inch / 32 mm discharge connection.
This compact outlet is appropriate for the pump's relatively small motor and flow capacity.
The discharge hose or pipe should nevertheless be properly sized. A very small or excessively long discharge line can create significant friction losses and reduce the actual flow rate.
15 mm Solids Handling
The LEO technical sheet specifies a maximum particle diameter of 15 mm for the LSWm25A.
This gives the pump an advantage over ordinary clean-water pumps when dealing with wastewater containing small suspended solids.
However, the 15 mm specification should not be interpreted as meaning that every 15 mm object can be pumped safely. Long fibres, cloth, rope, plastic bags, large debris and abrasive materials can still cause blockage or accelerated wear.
Where large debris is present, a suitable screen or strainer should be considered.
Automatic Float-Switch Operation
The “A” designation in the LSW series identifies the automatic version, which incorporates a float switch for automatic start and stop operation. LEO's product documentation explicitly describes the LSW range as having automatic operation with a float switch.
The operating sequence is typically:
Water level rises → Float switch activates → Pump starts → Water level falls → Float switch deactivates → Pump stops
This is useful in drainage pits and wastewater tanks because the pump can automatically respond to changes in water level.
IP68 Protection
The LSWM25A is designed for submerged operation, with Malaysian documentation listing IP68 protection.
LEO's newer LSW technical sheet lists the LSW range as IPX8, while some earlier catalogues specify IP68.
For a product listing, it is safest to describe the pump as IP68/IPX8-class submersible protection, unless the exact nameplate or current regional datasheet supplied with the unit specifies one rating.
Stainless-Steel Shaft
The pump uses an AISI 304 stainless-steel fabricated/welded shaft, providing improved resistance to corrosion in wet and wastewater environments. Malaysian LEO listings specifically identify the AISI 304 shaft as a feature.
The shaft works together with the mechanical-seal assembly to help protect the motor from the pumped liquid.
Operating Conditions
Published LEO and Malaysian specifications indicate the following operating conditions:
- Maximum immersion depth: 5 m
- Maximum liquid temperature: 40°C
- Liquid pH: 4–10
- Maximum particle size: 15 mm
- Single-phase supply: 220 V / 50 Hz
The pump should be used within these limits. Liquids containing highly corrosive chemicals, excessive abrasive solids or temperatures above the specified maximum should not be pumped without confirming material compatibility.
Suitable Applications
The LEO LSWM25A is suitable for:
Residential
- Household wastewater drainage
- Septic tank drainage
- Small sewage pits
- Basement drainage
- Residential drainage stations
Commercial
- Shop and commercial-building drainage
- Wastewater collection tanks
- Small facility drainage
Construction
- Small construction-site drainage
- Excavation water removal
- Temporary drainage pits
Industrial
- Light industrial wastewater
- Factory drainage
- Wastewater collection pits
Municipal
- Small drainage stations
- Sewage-treatment drainage systems
- Municipal wastewater collection
Agricultural
- Farm drainage
- Small irrigation drainage
- Wastewater transfer
LEO specifically identifies wastewater drainage in factories, construction sites and commercial facilities, municipal sewage-treatment drainage, residential drainage stations, methane pools and countryside field irrigation among the LSW/XSP application areas.
Typical Installation
A typical installation can be arranged as:
Wastewater collection pit → LEO LSWM25A → 1¼" discharge pipe/hose → drainage point
The pump is installed inside the collection pit and should remain adequately submerged during normal operation.
The float switch should have sufficient room to move freely. It should not be trapped against the wall of the pit, discharge pipe or other equipment because this can interfere with automatic start/stop operation.
Pump Selection Considerations
Before installing the LSWM25A, consider the complete hydraulic system rather than only the pump's maximum head.
The required head consists broadly of:
Static lift + pipe friction losses + fittings/valve losses + required discharge pressure
For example, a 5 m vertical lift does not necessarily mean the pump will deliver its maximum flow at 5 m because the discharge pipe and fittings also create resistance.
For this reason, the 133 L/min maximum-flow figure is a maximum specification, not a guaranteed operating flow. The actual duty point should be determined from the pump curve and system requirements.
Main Product Advantages
- 0.25 HP / 180 W motor for compact wastewater systems.
- 133 L/min maximum flow in the commonly specified XSP8-7/0.18I configuration.
- 7 m maximum head for low-to-moderate lift drainage.
- 1¼-inch / 32 mm outlet for compact discharge installations.
- 15 mm solids-handling capability for wastewater containing suspended particles.
- Automatic float-switch operation for automatic water-level control.
- Built-in thermal protector for motor protection.
- Copper motor winding for reliable operation.
- AISI 304 stainless-steel shaft for improved corrosion resistance.
- IP68/IPX8 submersible protection depending on catalog revision.
- 5 m maximum immersion depth.
- 40°C maximum liquid temperature.
- Suitable for residential, commercial, industrial, construction, municipal and agricultural drainage.
Product Details Summary
The LEO LSWM25A is a compact 0.25 HP / 0.18 kW sewage submersible pump designed for wastewater, sewage and dirty-water drainage. The commonly supplied Malaysian configuration operates at 220 V / 50 Hz, with a 1¼-inch / 32 mm outlet, 133 L/min maximum flow and 7 m maximum head. It can handle suspended particles up to approximately 15 mm and has a maximum immersion depth of 5 m. The pump features automatic start/stop with a float switch, copper motor winding, built-in thermal protection and an AISI 304 stainless-steel shaft, making it suitable for residential sewage pits, wastewater tanks, construction sites, commercial facilities, municipal drainage and agricultural applications.
SEO Product Title
LEO LSWM25A Sewage Submersible Pump 0.25HP 180W – 133L/min, 7M Head
SEO Product Description
LEO LSWM25A Sewage Submersible Pump is a compact 0.25HP / 180W wastewater and sewage pump designed for reliable drainage of dirty water, wastewater and sewage. Operating at 220V/50Hz single phase, it provides up to 133L/min flow with a maximum head of 7 metres and features a 1¼-inch / 32mm discharge outlet. The pump is designed to handle suspended particles up to 15mm and incorporates automatic float-switch operation, built-in thermal protection, copper motor winding and an AISI 304 stainless-steel shaft. With IP68-class submersible protection and a maximum immersion depth of 5 metres, the LEO LSWM25A is suitable for residential sewage pits, wastewater tanks, construction sites, commercial facilities, municipal drainage systems and agricultural applications.
Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 25A