B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 100XA



The LEO LSWM 100XA is an automatic 1.0 HP / 0.75 kW sewage submersible pump designed for wastewater drainage, sewage pits, drainage stations, construction sites, commercial facilities and municipal wastewater applications. The “X” configuration uses a semi-open impeller, making it suitable for wastewater containing suspended impurities. The Malaysian LEO distributor specification lists 220 V, 333 L/min maximum flow, 11 m maximum head and a 2-inch outlet.

LEO's general sewage-pump range is designed for applications including wastewater drainage, sewage management, septic tanks, industrial wastewater and drainage in public buildings. The range uses Class F insulation, IPX8 protection and stainless-steel shaft construction.

Product Specifications

Specification Details
Brand LEO
Model LSWM 100XA
Pump Type Automatic Sewage Submersible Pump
Impeller Type Semi-Open Impeller
Motor Power 0.75 kW
Motor Rating 1.0 HP
Voltage 220 V
Frequency 50 Hz
Phase Single Phase
Maximum Flow 333 L/min
Maximum Flow Approx. 20.0 m³/h
Maximum Head 11 m
Outlet Size 2"
Operation Automatic
Level Control Float Switch
Motor Protection Built-In Thermal Protector
Insulation Class F
Shaft Material AISI 304 Stainless Steel
Pump Body AISI 304 Stainless Steel
Handle AISI 304 Stainless Steel
Protection Class IPX8
Installation Fully Submersible

The published Malaysian specifications confirm 0.75 kW / 1.0 HP, 220 V, 333 L/min, 11 m maximum head and 2-inch outlet, together with automatic float-switch operation and AISI 304 fabricated shaft, handle and pump body.

1.0 HP / 0.75 kW Motor

The LSWM100XA is powered by a 0.75 kW / 1.0 HP motor, providing substantially greater pumping capacity than the smaller LSWM30XA and LSWM75XA models.

The pump operates from a 220 V single-phase supply, making it practical for residential, commercial and light-industrial wastewater installations where a single-phase electrical supply is available.

The motor incorporates a built-in thermal protector, while the LSW sewage-pump range uses Class F insulation. These features provide protection against excessive motor temperature during abnormal operating conditions.

333 L/min Maximum Flow

The LSWM100XA has a published maximum flow of 333 L/min, equivalent to approximately 20.0 m³/h.

This relatively high flow rate makes the pump suitable for efficiently removing wastewater from larger collection pits and drainage systems.

Typical applications include:

  • Sewage collection pits
  • Wastewater tanks
  • Drainage sumps
  • Septic systems
  • Construction-site drainage
  • Commercial drainage
  • Factory wastewater
  • Municipal drainage stations
  • Agricultural wastewater

The 333 L/min figure is the maximum flow rating. Actual flow depends on the total dynamic head and the resistance of the discharge system.

11-Metre Maximum Head

The LSWM100XA has a maximum head of 11 metres.

This gives the pump useful capability for wastewater systems requiring moderate vertical lifting.

It can be used for:

  • Basement drainage
  • Sewage pits
  • Wastewater collection tanks
  • Septic systems
  • Commercial drainage stations
  • Construction drainage
  • Short-to-medium discharge pipelines

The actual operating flow at a particular lifting height must be determined from the pump performance curve.

The complete system requirement should account for:

Static Lift + Pipe Friction + Fitting Losses + Check-Valve Losses + Required Discharge Pressure

2-Inch Discharge Outlet

The LSWM100XA uses a 2-inch discharge outlet.

The relatively large outlet is appropriate for its 333 L/min maximum flow capacity and helps minimise unnecessary friction losses.

For best performance, the discharge pipe should be appropriately sized and should avoid excessive reductions, sharp bends and restrictions.

A discharge pipe that is too small can substantially increase friction loss and reduce the actual flow delivered by the pump.

Semi-Open Impeller

The “X” in LSWM100XA identifies the semi-open impeller configuration. The Malaysian listing specifically describes this model as X = semi-open impeller.

The semi-open impeller is intended for liquids containing suspended impurities and provides greater tolerance for dirty-water applications than a conventional clean-water impeller.

This makes the LSWM100XA suitable for:

  • Wastewater
  • Sewage
  • Dirty water
  • Suspended particles
  • Light debris-containing liquids

It should not, however, be considered a sewage grinder pump. Large solid objects, ropes, cloth, plastic bags and excessive fibrous materials may still cause clogging.

LEO's broader SW range includes different impeller configurations, including semi-open vortex and grinding designs for applications with more demanding solids-handling requirements.

Automatic Float-Switch Operation

The LSWM100XA is an automatic sewage submersible pump equipped with a float switch. The float provides automatic pump start and stop according to the wastewater level.

The basic operating sequence is:

Water level rises → Float activates → Pump starts → Water level falls → Float deactivates → Pump stops

This makes the pump particularly useful for sewage pits, wastewater tanks and drainage sumps where continuous manual operation is unnecessary.

The float should be installed with sufficient free movement and should not become trapped against the tank wall, discharge pipe or other equipment.

AISI 304 Stainless-Steel Construction

The LSWM100XA is specified with an AISI 304 fabricated shaft, handle and pump body.

AISI 304 stainless steel provides good corrosion resistance for wet and wastewater environments and is appropriate for a pump designed for submerged operation.

The stainless-steel shaft also contributes to mechanical durability and resistance to corrosion around the rotating assembly.

Built-In Thermal Protection

A built-in thermal protector is incorporated into the pump motor.

This protection helps reduce the risk of motor overheating under abnormal operating conditions such as overload.

For a permanent installation, the pump should still be connected through correctly rated electrical protection and installed according to applicable electrical requirements.

Class F Insulation

The LSWM100XA uses Class F motor insulation. LEO specifies Class F insulation for its sewage-pump range.

Class F insulation provides an appropriate thermal insulation system for the motor and supports reliable operation within the manufacturer's specified operating conditions.

IPX8 Submersible Protection

LEO's sewage submersible pump range is specified with IPX8 protection, appropriate for equipment designed to operate submerged in liquid.

The pump should be installed fully in accordance with the manufacturer's instructions, particularly regarding electrical connections, grounding, cable routing and operating depth.

Wastewater and Sewage Applications

LEO identifies its sewage submersible pumps for wastewater drainage, sewage management and general industrial pumping. Applications include wastewater tanks, sewage tanks, septic tanks, factories, hotels, restaurants, schools and public buildings.

The LSWM100XA is particularly suitable for:

Residential Applications

  • Septic tank drainage
  • Residential sewage pits
  • Drainage stations
  • Basement wastewater
  • Household wastewater collection

Commercial Applications

  • Commercial building drainage
  • Restaurant wastewater
  • Hotel wastewater
  • Shopping and facility drainage
  • Wastewater collection tanks

Industrial Applications

  • Factory wastewater
  • Industrial drainage pits
  • Wastewater transfer
  • General industrial drainage

Construction Applications

  • Construction-site drainage
  • Excavation drainage
  • Temporary wastewater pumping
  • Accumulated water removal

Municipal Applications

  • Sewage-treatment plant drainage
  • Municipal drainage stations
  • Wastewater collection systems

Agricultural Applications

  • Farm wastewater
  • Methane pools
  • Field irrigation
  • Agricultural drainage

The Malaysian LEO listing specifically identifies factories, construction sites, commercial facilities, municipal sewage-treatment plants, residential drainage stations, methane pools and countryside field irrigation as application areas.

Typical Installation

A typical installation can be arranged as:

Wastewater / sewage collection pit → LEO LSWM100XA → 2" discharge pipe → drainage / treatment / collection point

The pump is positioned inside the wastewater collection area and operates while submerged.

For permanent systems, a suitable check valve can be installed in the discharge line to reduce reverse flow when the pump stops.

The discharge pipe should be adequately supported and correctly sized according to the required flow and total discharge distance.

Performance and Pump Selection

The LSWM100XA's 333 L/min maximum flow and 11 m maximum head should not be interpreted as simultaneous operating conditions.

Actual performance depends on the complete hydraulic system.

Important factors include:

  1. Required wastewater flow rate.
  2. Vertical lifting height.
  3. Discharge pipe diameter.
  4. Total discharge-pipe length.
  5. Number of elbows and fittings.
  6. Check-valve and valve losses.
  7. Wastewater characteristics.
  8. Required discharge pressure.

For example, increasing the discharge height or using a long, undersized pipe will reduce the available flow.

For engineering selection, the pump should be matched to the required Q-H duty point using the applicable LEO performance curve.

Key Product Advantages

  1. 1.0 HP / 0.75 kW motor for higher-capacity wastewater drainage.
  2. 333 L/min maximum flow.
  3. Approximately 20 m³/h maximum flow capacity.
  4. 11 m maximum head.
  5. 2-inch discharge outlet.
  6. Semi-open impeller for wastewater containing suspended impurities.
  7. Automatic float-switch operation.
  8. Built-in thermal protection.
  9. Class F insulation.
  10. AISI 304 stainless-steel shaft.
  11. AISI 304 stainless-steel pump body and handle.
  12. IPX8 submersible protection.
  13. 220 V single-phase operation.
  14. Suitable for residential, commercial, industrial, construction, municipal and agricultural wastewater applications.
  15. Suitable for sewage pits, wastewater tanks, drainage stations and septic systems.

Product Details Summary

The LEO LSWM100XA is an automatic 1.0 HP / 0.75 kW sewage submersible pump designed for high-volume wastewater and sewage drainage. Operating at 220 V single phase, it provides a maximum flow of 333 L/min (approximately 20 m³/h) and a maximum head of 11 metres through a 2-inch discharge outlet. Its semi-open impeller is designed for wastewater containing suspended impurities, while the pump incorporates automatic float-switch operation, built-in thermal protection and Class F insulation. The pump's AISI 304 stainless-steel shaft, handle and pump body provide good corrosion resistance for submerged wastewater applications. It is suitable for sewage pits, septic tanks, residential drainage stations, factories, commercial facilities, construction sites, municipal sewage-treatment systems and agricultural wastewater drainage.

SEO Product Title

LEO LSWM100XA Sewage Submersible Pump 1HP 0.75kW – 333L/min, 11M Head

SEO Product Description

LEO LSWM100XA Sewage Submersible Pump is an automatic 1HP / 0.75kW wastewater and sewage pump designed for efficient drainage of dirty water, sewage and wastewater containing suspended impurities. Operating at 220V/50Hz single phase, it delivers up to 333L/min (20m³/h) with a maximum head of 11 metres and features a 2-inch discharge outlet. The pump uses a semi-open impeller and incorporates automatic float-switch operation, built-in thermal protection and Class F insulation, while its AISI 304 stainless-steel fabricated shaft, handle and pump body provide improved durability in wet and wastewater environments. With IPX8-class submersible protection, the LEO LSWM100XA is suitable for septic tanks, sewage pits, residential drainage stations, construction sites, factories, commercial facilities, municipal wastewater systems and agricultural drainage applications.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 100XA