B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 150CA



The LEO LSWM150CA is an automatic 1.5 HP / 1.1 kW sewage submersible pump with a cutting-blade mechanism, designed for pumping wastewater and sewage containing solid bodies and fibrous material. The cutter helps reduce fibrous and soft solid material before discharge, making the pump suitable for sewage collection wells, cesspools, settling pits, domestic wastewater, commercial buildings, factories, municipal wastewater systems and agricultural applications.

Current Malaysian product listings consistently identify the model as LSWM150CA, with 1.1 kW / 1.5 HP power, 220 V single-phase supply, 2-inch outlet and 14 m maximum head. The published maximum-flow figures vary slightly by source, from 408 to 417 L/min; the Malaysian LEO listings most commonly state 417 L/min, equivalent to approximately 25 m³/h.

Product Specifications

Specification Details
Brand LEO
Model LSWM150CA
Pump Type Sewage Submersible Pump with Cutter Blade
Application Sewage / Wastewater / Dirty Water
Motor Power 1.1 kW
Motor Rating 1.5 HP
Voltage 220–230 V
Frequency 50 Hz
Phase Single Phase
Rated Current Approx. 6 A
Motor Speed Approx. 2,850 rpm
Maximum Flow 417 L/min
Maximum Flow Approx. 25 m³/h
Maximum Head 14 m
Discharge Outlet 2" / 50 mm
Impeller / Cutter Cutting-Blade Type
Automatic Control Float Switch
Motor Winding Copper
Shaft Material AISI 304 Stainless Steel
Pump Body AISI 304 / Cast Iron Construction*
Motor Protection Built-In Thermal Protector
Insulation Class F
Protection Class IPX8
Maximum Liquid Temperature 40°C
Maximum Immersion Depth 5 m
Duty Continuous Duty
Capacitor 20 μF / 450 V
Approx. Dimensions 269 × 186 × 426 mm*
Approx. Weight 20 kg*

*Construction, dimensions and weight can vary between regional listings. One Malaysian listing gives 269 × 186 × 426 mm / 20 kg, while another LSWM150CA specification gives 269 × 186 × 446 mm / 18.5 kg. Verify the actual unit nameplate and packaging data when publishing shipping specifications.

1.5 HP / 1.1 kW Motor

The LSWM150CA is equipped with a 1.1 kW / 1.5 HP single-phase motor. Malaysian specifications identify the operating voltage as 220 V, while some listings state 220–230 V.

The motor uses copper windings and incorporates a built-in thermal protector. The published speed is approximately 2,850 rpm.

This combination provides sufficient motor output for relatively high-volume sewage and wastewater transfer while retaining compatibility with common single-phase electrical supplies.

417 L/min Maximum Flow

The commonly published Malaysian specification gives a maximum flow of 417 L/min, equivalent to approximately 25 m³/h.

Another local specification lists 408 L/min, so the exact maximum-flow figure can vary according to the regional specification or performance-curve revision.

For catalogue purposes, 417 L/min / 25 m³/h is the more commonly published LSWM150CA figure.

Suitable high-flow drainage applications include:

  • Sewage collection pits
  • Wastewater tanks
  • Cesspools
  • Settling pits
  • Drainage stations
  • Factory wastewater
  • Construction-site drainage
  • Commercial wastewater
  • Municipal sewage systems
  • Agricultural wastewater

The maximum flow is measured under favourable hydraulic conditions. Actual flow decreases as discharge head and pipe resistance increase.

14-Metre Maximum Head

The LSWM150CA is specified with a maximum head of 14 metres by several Malaysian product listings.

This gives the pump useful capacity for applications requiring moderate vertical lifting, including:

  • Deep sewage pits
  • Basement drainage
  • Wastewater collection tanks
  • Septic systems
  • Commercial drainage stations
  • Construction drainage
  • Municipal wastewater transfer

The 14 m maximum head should not be interpreted as the head at 417 L/min. Maximum flow and maximum head represent different points on the pump's performance curve.

For correct pump selection:

Total Dynamic Head = Static Lift + Pipe Friction Loss + Fitting Losses + Valve/Check-Valve Losses

2-Inch / 50 mm Discharge

The LSWM150CA has a 2-inch discharge outlet.

The 2-inch outlet provides a practical discharge connection for the pump's flow range and allows wastewater to be transferred through a suitably sized pipe or hose.

For long discharge runs, the pipe diameter should be selected according to the required flow and total system head. An undersized discharge hose can create excessive friction loss and significantly reduce actual pumping performance.

Integrated Cutter-Blade Mechanism

The defining feature of the LSWM150CA is its cutter-blade system.

LEO describes the CA series as a submersible electric pump with shredder/cutter, intended for pumping and shredding sewage containing solid bodies and fibrous parts.

The cutting mechanism is designed to reduce suitable sewage material before it passes through the discharge system.

It is particularly useful for wastewater containing:

  • Fibrous material
  • Soft solid waste
  • Organic sewage solids
  • Stringy material
  • Domestic wastewater contaminants
  • General sewage debris

The cutter helps reduce the risk of blockage caused by fibrous material compared with a conventional non-cutter sewage pump.

However, the pump should not be considered suitable for hard metal objects, stones, construction debris or other abrasive materials that can damage the cutting mechanism.

Automatic Float-Switch Operation

The LSWM150CA incorporates automatic start/stop control using a float switch.

The normal operating sequence is:

Wastewater level rises → Float activates → Pump starts → Water level falls → Float deactivates → Pump stops

This makes the pump suitable for unattended operation in:

  • Sewage pits
  • Cesspools
  • Drainage tanks
  • Wastewater collection wells
  • Septic systems
  • Basement sumps

The float must be able to move freely. It should not become trapped against the tank wall, pump cable, discharge pipe or other equipment.

AISI 304 Stainless-Steel Shaft

The LSWM150CA uses an AISI 304 stainless-steel fabricated shaft. Malaysian product specifications also identify AISI 304 material for the shaft, handle and pump body.

AISI 304 stainless steel provides good corrosion resistance for components operating continuously in wet wastewater environments.

The shaft also forms part of the rotating assembly and therefore requires proper alignment and sealing for reliable operation.

Stainless-Steel and Anti-Rust Construction

The LSWM150CA uses a combination of stainless-steel and treated cast-iron components. One Malaysian specification identifies a stainless-steel shell, cast-iron pump body with special anti-rust treatment and AISI 304 shaft.

This construction provides:

  • Good mechanical strength
  • Corrosion resistance
  • Durability in wet environments
  • Protection for internal motor components
  • Robust support for the cutter and hydraulic assembly

Copper Motor Winding

The motor is equipped with copper windings.

Copper's high electrical conductivity makes it well suited for motor winding applications and contributes to efficient electrical energy transfer within the motor.

Together with thermal protection and Class F insulation, the motor is designed for reliable operation under the manufacturer's specified conditions.

Built-In Thermal Protection

The single-phase motor includes a built-in thermal protector.

This helps protect the motor from excessive temperature resulting from overload or abnormal operating conditions.

Thermal protection should not replace proper electrical protection. Correct circuit protection, cable sizing, grounding and installation remain essential.

Class F Insulation

The LSWM150CA is specified with Class F insulation.

Class F insulation provides appropriate thermal resistance for the motor winding system and is commonly used in electric pump motors designed for demanding operating environments.

IPX8 Submersible Protection

The LSWM150CA is designed for submerged operation and is specified with IPX8 protection in the Malaysian product specifications.

This makes it suitable for installation inside:

  • Sewage pits
  • Wastewater tanks
  • Drainage sumps
  • Cesspools
  • Collection wells

Electrical connections and cable joints must still be correctly installed and protected.

Maximum Immersion Depth: 5 m

The LSWM150CA is specified for a maximum immersion depth of 5 metres.

The pump should not be installed deeper than the manufacturer's specified limit.

Correct pump positioning is also important. The pump should not continuously draw excessive sediment or sludge from the bottom of the collection pit, as this can increase wear and affect the cutter and hydraulic components.

Maximum Liquid Temperature: 40°C

The published specification gives a maximum liquid temperature of 40°C.

The LSWM150CA is therefore intended for normal-temperature wastewater, sewage and drainage applications rather than high-temperature industrial liquids.

Suitable Applications

The LSWM150CA is designed for wastewater drainage in factories, construction sites and commercial facilities, as well as municipal sewage-treatment systems, residential drainage stations and agricultural applications.

Residential applications

  • Septic tanks
  • Cesspools
  • Sewage collection wells
  • Residential drainage stations
  • Basement wastewater

Commercial applications

  • Commercial buildings
  • Hotels
  • Restaurants
  • Shops and facilities
  • Wastewater collection tanks

Industrial applications

  • Factory wastewater
  • Industrial drainage pits
  • Wastewater transfer
  • Sewage treatment systems

Construction applications

  • Construction-site drainage
  • Excavation drainage
  • Floodwater removal
  • Temporary wastewater pumping

Municipal applications

  • Sewage-treatment plants
  • Municipal drainage stations
  • Wastewater collection systems

Agricultural applications

  • Farm wastewater
  • Methane pools
  • Field irrigation
  • Agricultural drainage

Typical Installation

A typical system can be arranged as:

Sewage / wastewater collection pit → LEO LSWM150CA → 2" discharge pipe → drainage / treatment / collection point

The pump is submerged in the collection pit, while the float switch automatically controls starting and stopping.

For permanent installations, a suitable check valve can be installed in the discharge line to reduce reverse flow after the pump stops.

The discharge pipe should be adequately supported, particularly where long pipe runs or vertical lifting are involved.

Pump Performance Considerations

The 417 L/min maximum flow and 14 m maximum head are not simultaneous operating points.

Actual performance depends on:

  1. Static lifting height.
  2. Discharge-pipe diameter.
  3. Total pipe length.
  4. Number of elbows and fittings.
  5. Check-valve losses.
  6. Wastewater characteristics.
  7. Cutter condition.
  8. Required discharge pressure.

For engineering selection, the required duty point should be matched against the applicable LEO Q-H pump curve.

Main Product Advantages

  1. 1.5 HP / 1.1 kW motor.
  2. Cutter-blade mechanism for sewage containing fibrous and suitable solid material.
  3. 417 L/min maximum published flow.
  4. Approximately 25 m³/h maximum flow capacity.
  5. 14 m maximum head.
  6. 2-inch / 50 mm discharge outlet.
  7. Automatic float-switch operation.
  8. Copper motor winding.
  9. Built-in thermal protection.
  10. AISI 304 stainless-steel shaft.
  11. Class F insulation.
  12. IPX8 submersible protection.
  13. 5 m maximum immersion depth.
  14. 40°C maximum liquid temperature.
  15. Continuous-duty motor design.
  16. Suitable for domestic, commercial, industrial, municipal, construction and agricultural wastewater applications.
  17. Particularly useful for sewage containing fibrous material and soft solid waste.

Product Details Summary

The LEO LSWM150CA is an automatic 1.5 HP / 1.1 kW sewage submersible cutter pump designed for pumping and cutting wastewater containing solid bodies and fibrous material. Operating at 220–230 V / 50 Hz single phase, it provides a published maximum flow of 417 L/min (approximately 25 m³/h) and a maximum head of 14 metres, through a 2-inch / 50 mm discharge outlet. The integrated cutting-blade mechanism helps reduce suitable fibrous and soft solid sewage material before discharge, making the pump suitable for cesspools, sewage collection wells, settling pits, septic systems and wastewater drainage. It features automatic float-switch operation, copper motor winding, built-in thermal protection, Class F insulation, IPX8 protection and an AISI 304 stainless-steel shaft, with a maximum liquid temperature of 40°C and maximum immersion depth of 5 metres.

SEO Product Title

LEO LSWM150CA Sewage Submersible Cutter Pump 1.5HP 1.1kW – 417L/min, 14M Head

SEO Product Description

LEO LSWM150CA Sewage Submersible Cutter Pump is an automatic 1.5HP / 1.1kW wastewater and sewage pump with an integrated cutting-blade mechanism, designed to pump and cut sewage containing fibrous material and suitable solid waste. Operating at 220–230V/50Hz single phase, it delivers up to 417L/min (approximately 25m³/h) with a maximum head of 14 metres through a 2-inch / 50mm discharge outlet. The pump features automatic float-switch operation, copper motor winding, built-in thermal protection, Class F insulation and IPX8 submersible protection, together with an AISI 304 stainless-steel shaft and corrosion-resistant construction. With a maximum immersion depth of 5 metres and maximum liquid temperature of 40°C, the LEO LSWM150CA is suitable for septic tanks, cesspools, sewage collection wells, residential drainage stations, factories, construction sites, commercial facilities, municipal sewage-treatment systems and agricultural wastewater applications.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 150CA