B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 200CA



The LEO LSWM200CA is a heavy-duty 2 HP / 1.5 kW automatic sewage submersible pump with an integrated cutter/shredder system, designed for pumping wastewater and sewage containing fibrous material and solid impurities. It is the higher-capacity CA cutter model in this range, providing up to 500 L/min (30 m³/h) and a maximum head of 17 metres through a 2-inch discharge outlet. Malaysian product listings identify the model as LSWM200CA, operating at 220 V single phase.

The LEO LSWm technical manual also confirms the LSWm200CA at 1.5 kW, 30 m³/h maximum flow and 17 m maximum head.

Product Specifications

Specification Details
Brand LEO
Model LSWM 200CA
Pump Type Sewage Submersible Pump with Cutter
Motor Power 1.5 kW
Motor Rating 2.0 HP
Voltage 220 V
Frequency 50 Hz
Phase Single Phase
Maximum Flow 500 L/min
Maximum Flow 30 m³/h
Maximum Head 17 m
Discharge Outlet 2"
Cutter System Integrated Cutting / Shredding System
Automatic Control Float Switch
Motor Winding Copper
Shaft Material AISI 304 Stainless Steel
Handle Material AISI 304 Stainless Steel
Pump Body AISI 304 / Cast-Iron Construction*
Thermal Protection Built-In
Insulation Class F
Protection Class IPX8
Maximum Liquid Temperature 40°C
Maximum Immersion Depth 5 m
Approx. Weight 33 kg*
Approx. Package Dimensions 60 × 36 × 26 cm*

*Physical construction and shipping dimensions can vary between regional specifications. Malaysian listings give approximately 33 kg and 60 × 36 × 26 cm.

2 HP / 1.5 kW Motor

The LSWM200CA is powered by a 1.5 kW / 2 HP single-phase motor, making it suitable for higher-volume sewage and wastewater applications than smaller LSWM models.

The Malaysian configuration is specified at 220 V, while international LEO specifications may list the corresponding model at 230 V.

The motor uses copper winding and incorporates thermal protection to help protect against excessive temperature during abnormal operating conditions. The LSW series uses Class F insulation and is designed for submerged operation.

500 L/min Maximum Flow

The LSWM200CA has a published maximum flow of 500 L/min, equivalent to 30 m³/h. This specification is supported by Malaysian product listings and the LEO LSWm technical manual.

This high flow capacity makes the pump suitable for:

  • Large sewage collection pits
  • Wastewater tanks
  • Septic systems
  • Commercial drainage stations
  • Factory wastewater
  • Construction-site drainage
  • Municipal wastewater systems
  • Agricultural wastewater
  • Sewage-treatment drainage

The 500 L/min figure represents maximum pump capacity under the relevant hydraulic conditions. Actual flow decreases as the discharge head and pipe resistance increase.

17-Metre Maximum Head

The LSWM200CA has a maximum head of 17 metres. Both Malaysian listings and the LEO technical manual support this specification.

This provides useful pumping capacity where wastewater must be lifted through a significant vertical height.

Potential applications include:

  • Deep sewage pits
  • Basement drainage
  • Wastewater collection tanks
  • Septic systems
  • Commercial drainage
  • Factory wastewater transfer
  • Municipal sewage systems
  • Construction drainage

The maximum head is not the same as the operating head at 500 L/min. Pump selection should always be based on the actual flow-versus-head duty point.

2-Inch Discharge Outlet

The LSWM200CA is equipped with a 2-inch discharge outlet.

A properly sized discharge pipe is important because pipe friction can have a significant effect on actual pump performance.

For longer discharge runs, the installer should consider:

  • Pipe diameter
  • Total pipe length
  • Vertical lift
  • Number of elbows
  • Check-valve losses
  • Other fittings
  • Required flow rate

Using an undersized hose can substantially reduce the actual flow available from the pump.

Integrated Cutter / Shredder System

The CA designation identifies the cutter configuration. The LSWM200CA is specifically sold as a sewage pump with a cutter/shredder, designed to handle wastewater containing solid and fibrous material.

The cutting mechanism helps break down suitable sewage material before it passes through the discharge system.

This is advantageous when wastewater contains:

  • Fibrous material
  • Stringy organic waste
  • Soft solid sewage
  • Domestic wastewater debris
  • Sewage with suspended solids

LEO's sewage range includes dedicated grinding-system pumps designed to reduce larger solid particles before they enter the discharge pipe.

The cutter should not be treated as a solution for hard metallic objects, stones, construction debris or other materials capable of damaging the cutter.

Two-Channel Impeller and Cutting Blade

Technical specifications for the LSWM200CA describe a two-channel impeller with a fixed cutting blade, together with a spiral cutting impeller arrangement.

This hydraulic arrangement combines pumping and cutting functions in one submersible assembly.

The cutter assists in reducing suitable solids and fibrous material, while the impeller generates the hydraulic flow required to transfer the wastewater.

Automatic Float-Switch Operation

The LSWM200CA is supplied with automatic start-and-stop float-switch control.

The operating sequence is:

Water level rises → Float activates → Pump starts → Water level falls → Float deactivates → Pump stops

This is useful for automatic wastewater management in:

  • Sewage pits
  • Drainage sumps
  • Septic tanks
  • Wastewater collection tanks
  • Commercial drainage stations
  • Industrial collection pits

The float must have sufficient space to move freely and should not be trapped against the tank wall, discharge pipe or electrical cable.

AISI 304 Stainless-Steel Shaft

The LSWM200CA uses an AISI 304 stainless-steel fabricated shaft. Malaysian specifications also identify AISI 304 for the shaft, handle and pump body.

AISI 304 stainless steel offers good corrosion resistance in wet wastewater environments and provides a durable material for the rotating shaft.

Stainless-Steel Construction

The LSWM200CA incorporates stainless-steel components in critical areas of the pump assembly. International specifications identify the motor body, impeller, cutter and shaft as AISI 304 stainless steel.

This construction provides useful resistance to the corrosive conditions typically associated with sewage and wastewater.

Some regional specifications describe the main hydraulic body as cast iron with stainless-steel components. Therefore, for a catalogue listing, it is preferable to describe the model as having stainless-steel critical components and corrosion-resistant pump construction rather than claiming that every external component is stainless steel.

Copper Motor Winding

The motor uses copper winding. This is a standard feature of the LEO sewage-pump construction and is specified for the LSWM200CA by international product information.

Copper winding provides good electrical conductivity and thermal characteristics for the motor.

Built-In Thermal Protection

The LSWM200CA incorporates a built-in thermal protector.

The thermal protector helps protect the motor from excessive temperature resulting from abnormal operating conditions or overload.

It should not replace correctly rated circuit protection, grounding and appropriate electrical installation.

Class F Insulation

The pump uses Class F motor insulation. This is explicitly specified for the LSWM200CA and the wider LEO sewage-pump range.

Class F insulation provides appropriate thermal resistance for the motor winding system.

IPX8 Protection

The LEO LSW sewage range is designed for submerged operation and uses IPX8 protection.

This makes the pump suitable for installation inside sewage pits, wastewater tanks and drainage sumps.

Proper electrical installation remains essential, including appropriate grounding, cable protection and sealed electrical connections.

Maximum Liquid Temperature: 40°C

The LSWM200CA is specified for a maximum liquid temperature of approximately 40°C.

It is therefore intended for normal-temperature sewage and wastewater rather than high-temperature industrial liquids.

The international specification also gives a liquid pH range of approximately 4–10.

Maximum Immersion Depth: 5 m

The LSWM200CA is specified for a maximum immersion depth of 5 metres.

The pump should not be installed beyond the manufacturer's specified immersion limit.

Correct positioning is also important to avoid continuously drawing excessive sludge and sediment from the bottom of a sewage pit.

Mechanical Seal

The LEO sewage-pump construction uses double-end mechanical seals to protect the motor from pumped liquid entering through the shaft area.

International LSWM200CA specifications identify SiC + graphite / ceramic + graphite mechanical-seal materials.

Mechanical sealing is particularly important for a sewage pump because the complete motor-pump assembly operates submerged.

Suitable Applications

LEO identifies its sewage submersible pumps for drainage, sewage pumping and industrial wastewater applications. The LSWM200CA is specifically listed for wastewater drainage in factories, construction sites and commercial facilities, municipal sewage-treatment plants, residential drainage stations and agricultural applications.

Residential applications

  • Septic tanks
  • Sewage collection pits
  • Drainage stations
  • Basement wastewater
  • Domestic sewage systems

Commercial applications

  • Hotels
  • Restaurants
  • Schools
  • Public buildings
  • Commercial wastewater tanks
  • Building drainage systems

Industrial applications

  • Factory wastewater
  • Food-processing wastewater
  • Industrial drainage pits
  • Wastewater treatment systems
  • Sewage transfer

Construction applications

  • Construction-site drainage
  • Excavation drainage
  • Temporary wastewater pumping
  • Accumulated-water removal

Municipal applications

  • Sewage-treatment plants
  • Municipal drainage stations
  • Wastewater collection systems

Agricultural applications

  • Farm wastewater
  • Methane pools
  • Field irrigation
  • Agricultural drainage

Typical Installation

A typical system can be arranged as:

Sewage / wastewater collection pit → LEO LSWM200CA → 2" discharge pipe → drainage / treatment / collection point

The pump is positioned inside the collection pit and the float switch controls the automatic start and stop function.

For permanent installations, a suitable check valve can be incorporated into the discharge line to reduce reverse flow when the pump stops.

The discharge line should be securely supported, particularly where the system includes a long horizontal run or substantial vertical lift.

Pump Performance Considerations

The 500 L/min maximum flow and 17 m maximum head represent different points on the pump's performance curve. They should not be interpreted as simultaneous operating conditions.

Actual pumping performance depends on:

  1. Required flow rate.
  2. Static vertical lift.
  3. Discharge-pipe diameter.
  4. Total pipe length.
  5. Number of bends and fittings.
  6. Check-valve losses.
  7. Wastewater characteristics.
  8. Cutter condition.
  9. Required discharge pressure.

For proper engineering selection, the required duty point should be matched to the manufacturer's Q-H performance curve.

Main Product Advantages

  1. 2 HP / 1.5 kW motor for high-capacity sewage pumping.
  2. 500 L/min maximum flow.
  3. 30 m³/h maximum capacity.
  4. 17 m maximum head.
  5. 2-inch discharge outlet.
  6. Integrated cutter/shredder system.
  7. Two-channel impeller with cutting system.
  8. Automatic float-switch operation.
  9. Copper motor winding.
  10. Built-in thermal protection.
  11. AISI 304 stainless-steel shaft.
  12. Stainless-steel cutter and impeller components.
  13. Class F insulation.
  14. IPX8 submersible protection.
  15. 5 m maximum immersion depth.
  16. 40°C maximum liquid temperature.
  17. Suitable for residential, commercial, industrial, construction, municipal and agricultural wastewater applications.
  18. Particularly suitable where sewage contains fibrous and soft solid material.

Product Details Summary

The LEO LSWM200CA is a heavy-duty 2 HP / 1.5 kW automatic sewage submersible cutter pump designed for high-volume wastewater and sewage transfer. Operating at 220 V / 50 Hz single phase, it delivers up to 500 L/min (30 m³/h) with a maximum head of 17 metres through a 2-inch discharge outlet. Its integrated cutter/shredder system helps break down suitable fibrous and soft solid sewage material before discharge, reducing the likelihood of blockage in the discharge system. The pump features automatic float-switch operation, copper motor winding, built-in thermal protection, Class F insulation, IPX8 protection and AISI 304 stainless-steel shaft, cutter and impeller components. With a maximum immersion depth of 5 metres and maximum liquid temperature of 40°C, it is suitable for sewage pits, septic tanks, factories, commercial facilities, construction sites, municipal sewage-treatment systems and agricultural wastewater applications.

SEO Product Title

LEO LSWM200CA Sewage Submersible Cutter Pump 2HP 1.5kW – 500L/min, 17M Head

SEO Product Description

LEO LSWM200CA Sewage Submersible Cutter Pump is a heavy-duty automatic 2HP / 1.5kW wastewater and sewage pump with an integrated cutter/shredder system, designed for high-capacity drainage of sewage containing fibrous material and suitable solid impurities. Operating at 220V/50Hz single phase, it delivers up to 500L/min (30m³/h) with a maximum head of 17 metres through a 2-inch discharge outlet. The pump incorporates an integrated cutting system, automatic float-switch start/stop, copper motor winding, built-in thermal protection and Class F insulation, together with IPX8 submersible protection and AISI 304 stainless-steel shaft, impeller and cutter components. The LEO LSWM200CA is suitable for septic tanks, sewage pits, wastewater collection stations, factories, construction sites, commercial buildings, municipal sewage-treatment systems and agricultural drainage applications.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 200CA