The LEO 80 WQ 40-9-2.2 T/QG is a heavy-duty submersible sewage and wastewater pump designed for efficient removal of dirty water, wastewater and sewage in commercial, industrial, construction and municipal applications. It combines a 2.2 kW (3 HP) three-phase motor, 3-inch discharge, high flow capacity and a compact submersible design for reliable dewatering performance. LEO specifications list the model with a maximum flow of approximately 933.3 L/min (56 m³/h) and maximum head of 21 m.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Series | WQ Sewage Submersible Pump |
| Model | 80 WQ 40-9-2.2 T/QG |
| Pump Type | Submersible Sewage / Wastewater Pump |
| Motor Power | 2.2 kW / 3 HP |
| Voltage | 415 V, 3 Phase, 50 Hz |
| Rated Speed | 3,000 RPM |
| Discharge Size | 3" |
| Maximum Flow Rate | 933.3 L/min / approx. 56 m³/h |
| Maximum Head | 21 m |
| Pump Connection | 80 mm |
| Motor Type | Submersible electric motor |
| Maximum Liquid Temperature | 35°C |
| Pump Body | Cast iron |
| Impeller | Cast iron |
| Motor Body | Cast iron |
| Mechanical Seal | SiC-SiC / Carbon-Ceramic |
| Approx. Product Weight | 31.9–32 kg |
| Application | Sewage, wastewater, dirty-water drainage and dewatering |
The published LEO WQ specification table gives 380 V, 2.2 kW, 3 HP, 3-inch outlet, 56 m³/h maximum flow and 21 m maximum head at 3,000 rpm; Malaysian supplier specifications commonly list the three-phase version as 415 V, 50 Hz.
Key Features
High-flow sewage pumping: With a maximum capacity of approximately 56 m³/h, this pump is suitable for moving substantial volumes of wastewater and dirty water.
3 HP three-phase motor: The 2.2 kW motor provides the power required for demanding continuous-duty drainage and wastewater applications. The 415 V three-phase configuration makes it suitable for industrial and commercial electrical installations.
3-inch discharge outlet: The large 3-inch outlet supports high-volume water transfer while helping reduce flow restriction in suitable discharge piping.
Submersible construction: The pump is designed to operate while submerged, allowing it to be positioned directly inside drainage pits, sumps, tanks and wastewater collection areas.
Heavy-duty construction: The WQ series uses a cast-iron pump body, impeller, motor body and base, providing a robust construction for demanding drainage and wastewater environments.
Mechanical shaft sealing: LEO specifies a SiC-SiC / Carbon-Ceramic mechanical seal arrangement for models in this power range, helping protect the motor from water ingress during operation.
High pumping head: The model has a published maximum head of 21 m, making it suitable for applications requiring both high flow and vertical lifting capability.
Thermal protection: The WQ construction includes a thermal-protection arrangement to help protect the motor against excessive operating temperature.
Typical Applications
The LEO 80 WQ 40-9-2.2 T/QG can be used for:
- Sewage and wastewater pumping
- Wastewater collection tanks
- Drainage pits and sumps
- Construction-site dewatering
- Basement and underground drainage
- Commercial building drainage
- Industrial wastewater transfer
- Municipal drainage systems
- Dirty-water removal
- Floodwater and accumulated-water drainage
- Factory and workshop drainage
- Water treatment and wastewater handling systems
The WQ range is intended for sewage, wastewater and dirty-water management, including commercial, industrial and municipal dewatering applications.
Dimensions
Published LEO dimensional data for the standard 80WQ40-9-2.2 version gives approximately 710 × 260 × 290 mm overall package dimensions, while another LEO technical document for the T/QG version gives approximately 604 × 289 × 249 mm. Dimensions can therefore vary according to the exact production/configuration version, so the actual supplied unit should be checked against its nameplate or manufacturer dimensional drawing before installation.
Model Number Explanation
80 WQ 40-9-2.2 T/QG
- 80 – nominal pump/discharge class, associated with the 80 mm / 3-inch WQ model
- WQ – LEO sewage/wastewater submersible pump series
- 40 – nominal flow designation
- 9 – model designation within the hydraulic range
- 2.2 – 2.2 kW motor power
- T – three-phase configuration
- QG – cutter/grinder configuration designation used for the applicable WQ/QG version
The T/QG version is listed separately from the standard 80 WQ 40-9-2.2 model in LEO-related catalogues and supplier listings.
SEO Product Description
LEO 80 WQ 40-9-2.2 T/QG 3HP 2.2kW Sewage Submersible Pump is a heavy-duty three-phase wastewater and sewage pump designed for efficient drainage, dewatering and dirty-water transfer. Powered by a 2.2 kW / 3 HP motor and equipped with a 3-inch discharge outlet, it delivers up to approximately 933.3 L/min (56 m³/h) with a maximum head of 21 m. Its durable cast-iron construction, submersible design and mechanical sealing system make it suitable for demanding sewage, wastewater, construction, industrial, commercial and municipal drainage applications.
Recommended Product Title
LEO 80 WQ 40-9-2.2 T/QG 3HP 2.2kW 3" Three Phase Sewage Submersible Pump
Short Product Description
LEO 80 WQ 40-9-2.2 T/QG is a 3 HP / 2.2 kW three-phase sewage submersible pump with a 3-inch discharge, maximum flow of approximately 56 m³/h and maximum head of 21 m. Built for heavy-duty wastewater, sewage, dirty-water drainage and dewatering applications, it is suitable for construction sites, commercial buildings, industrial facilities and municipal drainage systems.
Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - 80 WQ 40-9-2.2 T/QG