The LEO 100 WQ 65-20-7.5 T/QG is a heavy-duty three-phase submersible sewage pump with cutter/grinder system, designed for pumping sewage, wastewater, contaminated water and drainage liquids containing fibrous and organic matter. It is equipped with a 7.5 kW / 10 HP motor, 4-inch (100 mm) discharge, and operates at 3,000 RPM. Published LEO-series data specifies a maximum flow of 1,333.3 L/min (80 m³/h) and maximum head of 34.5 m.
The model's nominal duty point is approximately 65 m³/h at 20 m head, which corresponds directly with the 65-20 designation. The maximum flow and maximum head are the limits of the hydraulic performance range and should not be treated as simultaneous operating conditions.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Series | WQ(D)-QG Sewage Submersible Pump |
| Model | 100 WQ 65-20-7.5 T/QG |
| Pump Type | Submersible Sewage Pump with Cutter |
| Motor Power | 7.5 kW / 10 HP |
| Rated Voltage | 415 V |
| Frequency | 50 Hz |
| Phase | 3 Phase |
| Motor Speed | 3,000 RPM |
| Discharge Size | 4" / 100 mm |
| Nominal Flow | Approx. 65 m³/h |
| Nominal Head | Approx. 20 m |
| Maximum Flow | 1,333.3 L/min / approx. 80 m³/h |
| Maximum Head | 34.5 m |
| Cutter | Yes |
| Motor Winding | Copper |
| Insulation Class | F |
| Protection Class | IP68 |
| Mechanical Seal | Dual Mechanical Seal |
| Leak Protection | Leak-proof detector |
| Cooling / Protection | Oil Jacket |
| Maximum Liquid Temperature | 40°C |
| Permitted Liquid pH | 4–10 |
| Cable Length | 10 m |
| Connection | Hose Coupler |
| Auto-Float Switch | Not included |
| Approx. Gross Weight | 131 kg |
| Overall Pump Height | Approx. 724 mm |
| Discharge Dimension | 100 mm |
The Malaysian LEO WQ-series listing confirms the 100WQ65-20-7.5T/QG as a 415 V, 7.5 kW / 10 HP, 4-inch, 3,000 RPM model with 80 m³/h maximum flow and 34.5 m maximum head.
Key Features
7.5 kW / 10 HP three-phase motor:
The high-output motor is designed for demanding wastewater and sewage pumping applications requiring substantial flow and lifting capacity.
High-volume pumping:
The maximum flow is approximately 1,333.3 L/min, equivalent to 80 m³/h, making the pump suitable for large drainage pits, sewage collection systems and industrial wastewater installations.
High head capability:
The pump has a maximum head of 34.5 m, providing substantial vertical lifting capability for deep drainage systems and installations with significant elevation differences.
Nominal duty of 65 m³/h at 20 m:
The 65-20 designation corresponds to the model's nominal flow/head combination. LEO's technical information identifies this model as a pump for approximately 65 m³/h flow at 20 m head, while the hydraulic range extends to approximately 80 m³/h and 34.5 m head.
4-inch discharge:
The 100 mm / 4-inch discharge provides a large flow passage appropriate for high-volume sewage and wastewater transfer.
Cutter/grinder system:
The QG configuration incorporates a cutting mechanism intended to process suitable fibrous and organic materials before discharge. This helps reduce the likelihood of clogging in sewage systems where long-fibre materials are present.
Heavy-duty submersible construction:
The pump operates while submerged and can be installed in sewage pits, drainage sumps, wastewater collection tanks and other wet environments.
IP68 protection:
The motor enclosure is designed for demanding submerged applications, with published specifications identifying IP68 protection.
Copper motor winding:
The motor uses copper winding with Class F insulation, providing suitable thermal and electrical characteristics for demanding pump operation.
Dual mechanical seal:
A dual mechanical seal arrangement helps prevent wastewater from entering the motor chamber and protects the internal motor components.
Oil-jacket protection:
The oil-jacket arrangement provides additional protection around the mechanical-seal area and assists with heat management.
Leak-proof detector:
A leak-proof detection system provides additional protection against water penetration into the motor compartment.
Performance Data
| Performance Parameter | Specification |
|---|---|
| Motor Power | 7.5 kW |
| Motor Rating | 10 HP |
| Nominal Flow | Approx. 65 m³/h |
| Nominal Head | Approx. 20 m |
| Maximum Flow | Approx. 80 m³/h |
| Maximum Flow | 1,333.3 L/min |
| Maximum Head | 34.5 m |
| Discharge | 4" / 100 mm |
| Speed | 3,000 RPM |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Phase | 3 Phase |
The published LEO-series table lists 1,333.3 L/min maximum flow and 34.5 m maximum head for this exact model.
A separate LEO technical catalogue identifies the model's physical dimensions as approximately 355 mm × 200 mm × 155 mm, with approximately 724 mm overall height and a 100 mm discharge connection.
Operating Conditions
The pump is designed for wastewater environments with the following published operating limits:
- Maximum liquid temperature: 40°C
- Liquid pH: approximately 4–10
- Motor protection: IP68
- Insulation: Class F
- Power supply: 415 V / 50 Hz / 3 Phase
- Motor speed: 3,000 RPM
- Submersible operation
- Copper motor winding
- Dual mechanical seal
The model should be used for liquids within the manufacturer's specified physical and chemical characteristics. Extremely abrasive solids, oversized hard objects or unsuitable chemicals should not be assumed to be compatible simply because the pump has a cutter.
Cutter / QG System
The T/QG configuration is specifically useful for sewage containing fibrous and organic materials.
The cutter mechanism is intended to reduce suitable material before it passes through the discharge system. Typical wastewater materials that can benefit from a cutter configuration include:
- Paper
- Fibrous materials
- Textile-type fibres
- Cellulose
- Organic sewage matter
- Long-string materials
- Mixed wastewater solids
The pump is specifically marketed for sewage containing high levels of organic and long-fibre inclusions such as paper, fabric and cellulose.
The cutter should not be interpreted as a universal macerator for all hard or abrasive solids. Proper application selection remains important.
Typical Applications
The LEO 100 WQ 65-20-7.5 T/QG is suitable for:
- Factory wastewater drainage
- Industrial sewage pumping
- Commercial wastewater systems
- Municipal sewage treatment plants
- Sewage collection stations
- Residential drainage stations
- Construction-site dewatering
- Drainage pits and sumps
- Wastewater storage tanks
- Underground drainage
- Basement drainage
- Municipal drainage projects
- Agricultural wastewater
- Methane/biogas pools
- Flooded-area drainage
- Field irrigation
- General dirty-water transfer
LEO WQ-series application information includes factories, construction sites, commercial facilities, municipal sewage treatment plants, residential drainage stations, municipal projects, methane pools and countryside field irrigation.
Construction & Protection
The pump incorporates a range of features for demanding wastewater environments:
- Heavy-duty submersible construction
- Cutter/grinder system
- 4-inch discharge
- Copper motor winding
- Class F insulation
- IP68 protection
- Dual mechanical seal
- Oil-jacket protection
- Leak-proof detector
- 10 m power cable
- Hose-coupler connection
- Three-phase motor
The WQ-series technical documentation also identifies a stainless-steel shaft and double-end mechanical sealing arrangement for the range.
Dimensions & Weight
For this exact model, published data gives:
Overall pump height: approximately 724 mm
Discharge: 100 mm
Packing dimensions: approximately 1054 × 399 × 439 mm
Gross weight: approximately 131 kg
Another technical catalogue lists approximately 106 kg net weight and 131 kg gross/packed weight for the model.
For installation, the actual supplied pump and manufacturer dimensional drawing should be used rather than relying solely on packing dimensions.
Model Number Explanation
100 WQ 65-20-7.5 T/QG
- 100 – 100 mm / 4-inch discharge class
- WQ – LEO submersible sewage/wastewater pump series
- 65 – nominal flow designation, approximately 65 m³/h
- 20 – nominal head designation, approximately 20 m
- 7.5 – 7.5 kW motor power
- T – three-phase configuration
- QG – cutter/grinder sewage-pump configuration
The model therefore represents a 4-inch, 10 HP three-phase cutter sewage pump with approximately 65 m³/h nominal flow at 20 m nominal head.
Installation Considerations
Because this is a 7.5 kW three-phase submersible pump, installation should include a properly rated control cabinet and suitable motor protection.
Recommended installation practices include:
- Do not operate the pump dry.
- Ensure adequate liquid level before starting.
- Use correctly sized 4-inch discharge piping.
- Provide appropriate overload protection.
- Provide short-circuit protection.
- Ensure proper electrical earthing.
- Verify phase rotation before operation.
- Inspect the power cable before installation.
- Inspect the mechanical seal and pump body before commissioning.
- Ensure the wastewater temperature and pH remain within the permitted limits.
- Avoid operating outside the pump's intended hydraulic duty range.
- Provide appropriate lifting equipment due to the pump's substantial weight.
SEO Product Description
LEO 100 WQ 65-20-7.5 T/QG 10HP 7.5kW 4" Three Phase Cutter Sewage Submersible Pump is a heavy-duty wastewater and sewage pump designed for high-volume drainage, industrial wastewater transfer, construction dewatering and municipal sewage applications. Powered by a 7.5 kW / 10 HP three-phase motor, the pump has a nominal capacity of approximately 65 m³/h at 20 m head, with a maximum flow of approximately 1,333.3 L/min (80 m³/h) and maximum head of 34.5 m. It features a 4-inch discharge, cutter/grinder system, IP68 protection, copper motor winding, Class F insulation, dual mechanical seal, oil-jacket protection and leak-proof detector. The robust submersible construction makes it suitable for factories, construction sites, commercial facilities, sewage treatment plants, drainage stations, municipal projects and other demanding wastewater management applications.
Recommended Product Title
LEO 100 WQ 65-20-7.5 T/QG 10HP 7.5kW 4" Three Phase Cutter Sewage Submersible Pump
Short Product Description
LEO 100 WQ 65-20-7.5 T/QG is a 10 HP / 7.5 kW three-phase cutter sewage submersible pump with a 4-inch discharge. It provides approximately 65 m³/h nominal flow at 20 m nominal head, with maximum flow of 80 m³/h and maximum head of 34.5 m. Designed for heavy-duty sewage, wastewater, industrial drainage and dewatering, it features IP68 protection, copper motor winding, Class F insulation, dual mechanical seals, oil-jacket protection and a cutter/grinder system for improved handling of suitable fibrous and organic wastewater materials.
Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - 100 WQ 65-20-7.5 T/QG