The LEO 80 SWE 40-13-3L is a heavy-duty three-phase submersible sewage and wastewater pump equipped with a 3.0 kW / 4 HP motor and a 3-inch (80 mm) discharge. It belongs to LEO's SWE series, which uses a high-efficiency, clogging-resistant enclosed-channel impeller for wastewater containing suspended solids. The model has a rated flow of 40 m³/h at 13 m head, a maximum flow of approximately 76 m³/h, and a maximum head of 21 m. The maximum solid passage is 30 mm.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Series | SWE Submersible Sewage Pump |
| Model | 80 SWE 40-13-3L |
| Pump Type | Submersible Sewage / Wastewater Pump |
| Motor Power | 3.0 kW / 4 HP |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Phase | 3 Phase |
| Motor Speed | 2-Pole / approx. 3,000 RPM |
| Discharge Size | 3" / 80 mm |
| Rated Flow | 40 m³/h / approx. 667 L/min |
| Rated Head | 13 m |
| Maximum Flow | 76 m³/h |
| Maximum Head | 21 m |
| Maximum Solid Passage | 30 mm |
| Impeller Type | Enclosed Double-Channel |
| Motor Winding | Copper |
| Insulation Class | F |
| Protection Class | IPX8 / IP68 class |
| Mechanical Seal | Double-End Mechanical Seal |
| Shaft | Stainless-Steel Welded Shaft |
| Maximum Liquid Temperature | 40°C |
| Permitted Liquid pH | 4–10 |
| Maximum Immersion Depth | 10 m |
| Cable Length | 10 m |
| Connection | Hose / Pipe / Quick Coupling |
| Approx. Gross Weight | 54.4 kg |
| Packing Dimensions | Approx. 874 × 284 × 363 mm |
The exact LEO catalogue identifies the 80SWE40-13-3L with an 80 mm / 3-inch outlet, 3 kW motor, 4 HP rating, 40 m³/h rated flow, 76 m³/h maximum flow, 13 m rated head, 21 m maximum head and 30 mm maximum solid passage.
Key Features
3.0 kW / 4 HP three-phase motor:
The 3 kW motor provides the power required for commercial, industrial and municipal wastewater pumping. The Malaysian product listing specifies a 415 V supply and rated flow of approximately 666 L/min at 13 m head.
High-volume wastewater handling:
The pump has a rated capacity of 40 m³/h, equivalent to approximately 667 L/min, while the published maximum hydraulic flow is 76 m³/h. This makes it suitable for high-volume sewage and wastewater drainage.
13 m rated head:
The model is designed around a rated operating head of 13 m, with a published maximum head of 21 m. The actual operating point will depend on discharge-pipe length, diameter, fittings, elevation and system resistance.
3-inch discharge:
The 80 mm / 3-inch discharge provides a practical connection size for commercial and industrial wastewater systems.
Enclosed double-channel impeller:
The SWE series uses a high-efficiency, clogging-resistant enclosed-channel impeller. This design provides efficient hydraulic performance while allowing appropriately sized suspended solids to pass through the pump.
30 mm solid passage:
The 80 SWE 40-13-3L has a maximum solid-passage specification of 30 mm, making it suitable for wastewater containing appropriately sized suspended solids.
Submersible construction:
The pump and motor are close-coupled and designed to operate while submerged. This eliminates the need for a conventional surface-mounted suction arrangement and helps avoid problems associated with insufficient NPSH.
IPX8/IP68-class protection:
LEO's SWE documentation specifies IPX8 protection for the submersible motor, while product listings commonly identify the pump as IP68-class equipment. This is intended for reliable operation in submerged environments.
Class F insulation:
The motor uses Class F insulation, suitable for the thermal requirements of demanding submersible pump operation.
Double mechanical seal:
The pump uses double-end mechanical seals to help prevent wastewater from entering the motor chamber and to protect the internal motor components.
Stainless-steel welded shaft:
The SWE series incorporates a stainless-steel welded shaft, providing durability and corrosion resistance in wastewater environments.
Performance Data
| Performance Parameter | Specification |
|---|---|
| Motor Power | 3.0 kW |
| Motor Rating | 4 HP |
| Rated Flow | 40 m³/h |
| Rated Flow | Approx. 667 L/min |
| Rated Head | 13 m |
| Maximum Flow | 76 m³/h |
| Maximum Head | 21 m |
| Maximum Solid Passage | 30 mm |
| Outlet | 3" / 80 mm |
| Speed | Approx. 3,000 RPM |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Phase | 3 Phase |
The 40 m³/h at 13 m figures represent the model's nominal duty designation, while 76 m³/h and 21 m are published maximum hydraulic values. These maximum values should not be interpreted as being achieved simultaneously.
Impeller Design
The 80 SWE 40-13-3L uses an enclosed double-channel impeller, rather than the cutter/grinder configuration used in LEO's QG models.
This impeller design provides:
- High hydraulic efficiency
- Good wastewater handling
- Reduced clogging tendency
- Passage for suspended solids
- Stable pumping performance
- Suitability for general sewage and wastewater
LEO specifically describes the SWE series as using a highly efficient, clogging-resistant enclosed-channel impeller.
The 30 mm solid passage is an important selection parameter. If the wastewater contains larger, long-string or particularly difficult solids, the application should be evaluated before selecting this pump. A standard SWE pump should not be treated as equivalent to a cutter/grinder pump.
Operating Conditions
Published LEO SWE-series operating conditions include:
- Frequency: 50 Hz
- Motor: 2-pole
- Insulation: Class F
- Protection: IPX8
- Maximum liquid temperature: 40°C
- Liquid pH: approximately 4–10
- Maximum immersion depth: approximately 10 m
- Double-end mechanical seals
- Stainless-steel welded shaft
- Copper motor winding
LEO's broader sewage-pump documentation also specifies a 10 m maximum immersion depth, 40°C maximum liquid temperature and 4–10 pH range for the applicable submersible sewage-pump range.
Typical Applications
The LEO 80 SWE 40-13-3L is suitable for:
- Sewage drainage
- Wastewater pumping
- Factory wastewater
- Construction-site drainage
- Commercial building drainage
- Municipal wastewater systems
- Sewage treatment plants
- Drainage stations
- Septic tanks
- Accumulated-water removal
- Industrial wastewater
- Food-processing wastewater
- Leather-factory wastewater
- Stock-farm wastewater
- Hotels
- Restaurants
- Schools
- Public buildings
LEO identifies wastewater drainage from attenuation tanks, purification tanks and sewage tanks, fibrous wastewater from leather and food-processing factories, sewage management, septic tanks, stock farms, hotels, restaurants, schools and public buildings as SWE-series applications.
Installation Options
The SWE series is designed for flexible installation and can be connected using:
- Flexible hose
- Rigid pipe
- Quick-coupling system
- Suitable permanent discharge piping
This allows the pump to be used for both temporary drainage and permanent wastewater installations.
For permanent installations, a suitable auto-coupling or guide-rail arrangement can be used where required by the installation design.
Construction & Protection
The LEO 80 SWE 40-13-3L incorporates:
- Heavy-duty submersible pump construction
- Enclosed double-channel impeller
- 3-inch discharge
- 30 mm solid passage
- Copper motor winding
- Class F insulation
- IPX8/IP68-class submersible protection
- Double mechanical seal
- Stainless-steel welded shaft
- Ball bearings
- 10 m power cable
- Flexible installation options
LEO's SWE-series documentation confirms the use of ball bearings, double-end mechanical seals and stainless-steel welded shafts.
Dimensions & Weight
Published LEO catalogue information gives the following approximate packing specifications:
Packing length: 874 mm
Packing width: 284 mm
Packing height: 363 mm
Gross weight: approximately 54.4 kg
The technical dimensional drawing for the 80 SWE models indicates approximately:
- L1: 265 mm
- L2: 223 mm
- L3: 112 mm
- L4: 160 mm
- Overall H: 557 mm
- H1: 86 mm
- Discharge D: 80 mm
- D1: 150 mm
- D2: 18 mm
- Mounting dimension M: 16 mm
Actual installation dimensions should be checked against the supplied pump and current manufacturer drawing before fabricating pipework or mounting arrangements.
Model Number Explanation
80 SWE 40-13-3L
- 80 – 80 mm / 3-inch discharge class
- SWE – LEO enclosed-channel submersible sewage pump series
- 40 – nominal flow designation, approximately 40 m³/h
- 13 – nominal head designation, approximately 13 m
- 3 – 3.0 kW motor power
- L – SWE-series model/configuration designation
The model therefore represents a 3-inch, 4 HP three-phase SWE sewage pump designed for approximately 40 m³/h at 13 m nominal head.
Difference Between SWE and WQ/QG Models
For product selection, the 80 SWE 40-13-3L should not be confused with the similarly sized 80 WQ 40-13-3 or 80 WQ 40-12-3 T/QG.
| Feature | 80 SWE 40-13-3L | WQ/QG Equivalent |
|---|---|---|
| Pump Series | SWE | WQ / QG |
| Motor | 3 kW / 4 HP | 3 kW / 4 HP |
| Discharge | 3" | 3" |
| Impeller | Enclosed Double-Channel | QG Cutter / Grinder on QG version |
| Solid Passage | 30 mm | Model-dependent |
| Rated Flow | 40 m³/h | Model-dependent |
| Rated Head | 13 m | Model-dependent |
| Cutter | No | Yes on QG |
| Main Strength | Efficient wastewater handling | Improved handling of suitable fibrous/organic solids |
The SWE model is therefore a good choice where efficient sewage/wastewater pumping and a 30 mm solids passage are sufficient. A QG cutter model is more appropriate when the wastewater has a known tendency to clog conventional impellers with long fibres or similar materials.
Installation Considerations
For the 415 V three-phase 3 kW version:
- Do not operate the pump dry.
- Ensure adequate liquid level before starting.
- Verify correct three-phase rotation.
- Provide appropriate overload and short-circuit protection.
- Ensure proper electrical earthing.
- Use correctly sized 3-inch discharge piping.
- Do not exceed the specified immersion depth.
- Keep liquid temperature within the 40°C limit.
- Ensure wastewater chemistry remains within the specified pH range.
- Check the cable and mechanical seal before commissioning.
- Provide appropriate lifting and securing arrangements.
- Follow LEO's installation and maintenance requirements.
SEO Product Description
LEO 80 SWE 40-13-3L 4HP 3.0kW 3" Three Phase Sewage Submersible Pump is a heavy-duty wastewater and sewage pump designed for efficient drainage in factories, construction sites, commercial facilities, sewage treatment plants and other wastewater systems. Powered by a 3.0 kW / 4 HP three-phase motor, the pump delivers a rated flow of approximately 40 m³/h (667 L/min) at 13 m rated head, with a maximum flow of approximately 76 m³/h and maximum head of 21 m. Its enclosed double-channel clog-resistant impeller provides a 30 mm solids passage, while IPX8/IP68-class protection, Class F insulation, double mechanical seals, copper motor winding and a stainless-steel welded shaft provide reliable performance in demanding submerged wastewater applications.
Recommended Product Title
LEO 80 SWE 40-13-3L 4HP 3.0kW 3" Three Phase Sewage Submersible Pump
Short Product Description
LEO 80 SWE 40-13-3L is a 4 HP / 3.0 kW three-phase sewage submersible pump with a 3-inch discharge and 30 mm solid passage. It provides approximately 40 m³/h (667 L/min) rated flow at 13 m head, with a maximum flow of 76 m³/h and maximum head of 21 m. Its enclosed double-channel anti-clogging impeller, IPX8/IP68-class protection, Class F insulation and double mechanical seal make it suitable for sewage, wastewater, industrial drainage, construction drainage and municipal applications.
Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - 80 SWE 40-13-3L