B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - 50 SWE 15-20-2.2L



The LEO 50 SWE 15-20-2.2L is a heavy-duty three-phase submersible sewage pump from LEO's SWE series, designed for wastewater drainage, sewage management, industrial drainage and general dirty-water applications. It features a 2.2 kW / 3 HP motor, 2-inch discharge, enclosed double-channel impeller and a 25 mm solids passage. The model has a rated flow of approximately 45 m³/h (750 L/min) at a rated head of 20 m, with a maximum head of approximately 23 m.

Product Specifications

Specification Details
Brand LEO
Series SWE Submersible Sewage Pump
Model 50 SWE 15-20-2.2L
Pump Type Submersible Sewage / Wastewater Pump
Motor Power 2.2 kW / 3 HP
Voltage 415 V
Frequency 50 Hz
Phase 3 Phase
Motor Speed 2-Pole / 2,900–3,000 RPM class
Discharge Size 2"
Rated Flow 750 L/min / 45 m³/h
Rated Head 20 m
Maximum Head 23 m
Solid Passage 25 mm
Impeller Type Enclosed Double-Channel Impeller
Motor Winding Copper
Insulation Class F
Protection Class IP68
Mechanical Seal Double-End Mechanical Seal
Shaft Stainless Steel Welded Shaft
Maximum Liquid Temperature 40°C
Permitted Liquid pH 4–10
Maximum Immersion Depth 10 m
Cable Length 10 m
Connection Hose / Pipe / Quick Coupling
Approx. Gross Weight 45 kg
Packing Dimensions Approx. 924 × 284 × 363 mm

The exact 50 SWE 15-20-2.2L model is listed with 2.2 kW / 3 HP, 415 V, 2-inch outlet, 750 L/min maximum flow, 23 m maximum head and 25 mm solid passage.

Key Features

2.2 kW / 3 HP three-phase motor:
The pump uses a 2.2 kW motor designed for demanding sewage and wastewater drainage. The three-phase 415 V configuration makes it suitable for commercial, industrial and municipal installations.

High-flow performance:
The pump can handle approximately 750 L/min, equivalent to 45 m³/h, making it suitable for moving significant quantities of wastewater and accumulated water.

20 m rated head:
The model is designed around a rated duty of approximately 45 m³/h at 20 m head. Its maximum published head is approximately 23 m.

2-inch discharge:
The 2-inch outlet provides a practical connection size for sewage drainage and wastewater transfer systems.

Enclosed double-channel impeller:
The SWE series uses a high-efficiency, anti-clogging enclosed channel impeller. The design provides good hydraulic efficiency while allowing suitable suspended solids to pass through the pump.

25 mm solid passage:
The pump has an approximately 25 mm impeller passage, allowing wastewater containing appropriately sized suspended solids to pass through with reduced clogging risk.

IP68 protection:
The fully enclosed submersible motor is designed for operation in wet and submerged environments. The model is specified with IP68 protection.

Class F insulation:
The motor uses Class F insulation, providing appropriate thermal protection for demanding pump operation.

Double mechanical seal:
The double-end mechanical seal helps prevent wastewater from entering the motor compartment and protects the internal motor components.

Stainless-steel welded shaft:
The SWE series uses a stainless-steel welded shaft designed for durability and corrosion resistance in wastewater environments.

Impeller Design

The 50 SWE 15-20-2.2L uses an enclosed double-channel impeller, rather than the cutter arrangement used on LEO QG models.

This design provides a useful balance between:

  • High hydraulic efficiency
  • Good wastewater handling
  • Anti-clogging performance
  • Passage of suspended solids
  • Stable pumping performance

The SWE series is specifically described by LEO as having a high-efficiency and clogging-resistant enclosed-channel impeller.

For wastewater containing particularly long fibres or materials that are prone to wrapping around conventional impellers, the application should be evaluated carefully. The 50 SWE is not the same configuration as LEO's QG cutter/grinder pumps.

Operating Conditions

The published specifications for this model include:

  • Maximum liquid temperature: 40°C
  • Liquid pH: approximately 4–10
  • Maximum immersion depth: 10 m
  • Protection class: IP68
  • Insulation class: F
  • Frequency: 50 Hz
  • Three-phase electrical supply
  • Double mechanical seal
  • Stainless-steel shaft

LEO's SW-series documentation describes these pumps as fully submersible centrifugal pumps, with the motor hermetically sealed close to the pump body. Submerged operation also helps provide sufficient liquid at the pump suction and avoids typical NPSH/cavitation problems associated with inadequately flooded surface pumps.

Typical Applications

The LEO 50 SWE 15-20-2.2L is suitable for:

  • Sewage drainage
  • Wastewater pumping
  • Agricultural sewage drainage
  • Factory wastewater
  • Food-processing wastewater
  • Leather-factory wastewater
  • Paper and pulp wastewater
  • Construction-site drainage
  • Building drainage systems
  • Domestic sewage
  • Municipal drainage
  • Septic-tank pumping
  • Stock-farm wastewater
  • Hotels
  • Restaurants
  • Schools
  • Public buildings
  • Wastewater treatment plants
  • Accumulated-water drainage

LEO specifically identifies wastewater from attenuation tanks, purification tanks and sewage tanks, as well as wastewater containing fibrous additives from leather and food-processing factories, sewage management, septic tanks, stock farms, hotels, restaurants, schools and public buildings.

Installation Flexibility

One of the advantages of the SWE series is its flexible installation arrangement. The pump can be connected using:

  • Flexible hose
  • Rigid pipe
  • Quick-coupling system
  • Suitable fixed discharge piping

This allows the pump to be configured for temporary construction-site drainage as well as more permanent sewage installations.

Performance Summary

Performance Parameter Specification
Motor Power 2.2 kW
Motor Rating 3 HP
Rated Flow 45 m³/h
Rated Flow 750 L/min
Rated Head 20 m
Maximum Head 23 m
Discharge 2"
Solid Passage 25 mm
Voltage 415 V
Frequency 50 Hz
Phase 3 Phase
Protection IP68
Insulation Class F
Maximum Immersion 10 m
Maximum Liquid Temperature 40°C

The 45 m³/h flow and 20 m rated head should be regarded as the model's nominal operating point, while 750 L/min and 23 m are published maximum performance figures. Flow and head vary according to the actual system resistance and pump operating point.

Dimensions & Weight

Published LEO catalogue data gives approximately:

Overall dimensions / packing: 924 × 284 × 363 mm
Gross weight: approximately 45 kg.

LEO catalogue dimensional data for the 50 SWE 15-20-2.2L indicates approximately 571 mm overall height for the single-phase/three-phase dimensional configurations, with a discharge-related dimension of approximately 50 mm.

For installation planning, the actual supplied unit and manufacturer's dimensional drawing should be used.

Model Number Explanation

50 SWE 15-20-2.2L

  • 50 – pump/discharge size designation
  • SWE – LEO SWE enclosed-channel submersible sewage pump series
  • 15 – nominal flow designation
  • 20 – nominal head designation, approximately 20 m
  • 2.2 – 2.2 kW motor power
  • L – model/configuration designation

The 50 SWE 15-20-2.2L is distinct from the 50 SWEM 15-20-2.2L, which is the 220/230 V single-phase variant. The 50 SWE 15-20-2.2L is the three-phase version, listed at 415 V.

50 SWE vs 50 SWEM

Feature 50 SWE 15-20-2.2L 50 SWEM 15-20-2.2L
Phase 3 Phase Single Phase
Voltage 415 V 220/230 V
Motor 2.2 kW / 3 HP 2.2 kW / 3 HP
Discharge 2" 2"
Flow 750 L/min 750 L/min
Maximum Head 23 m 23 m
Solid Passage 25 mm 25 mm
Protection IP68 IP68
Application Industrial / Commercial / Municipal Domestic / Commercial / Suitable Single-Phase Sites

The two variants share the same basic hydraulic specification but differ in electrical configuration.

Installation Considerations

For the 415 V three-phase version, installation should use appropriate motor protection and electrical controls.

Recommended practices include:

  • Do not operate the pump dry.
  • Ensure sufficient liquid covers the pump before starting.
  • Verify correct three-phase phase rotation.
  • Use suitable overload and short-circuit protection.
  • Provide proper electrical earthing.
  • Use correctly sized 2-inch discharge piping.
  • Avoid exceeding the 10 m maximum immersion depth.
  • Ensure wastewater temperature does not exceed 40°C.
  • Keep wastewater chemistry within the specified pH range.
  • Inspect the power cable and mechanical seal before commissioning.
  • Use appropriate lifting equipment and secure the pump properly during installation.

SEO Product Description

LEO 50 SWE 15-20-2.2L 3HP 2.2kW 2" Three Phase Sewage Submersible Pump is a high-efficiency wastewater and sewage pump designed for agricultural, industrial, commercial, construction and municipal drainage applications. Powered by a 2.2 kW / 3 HP 415 V three-phase motor, it provides a rated flow of approximately 750 L/min (45 m³/h) at 20 m rated head, with a maximum head of approximately 23 m. Featuring an enclosed double-channel anti-clogging impeller, 25 mm solid passage, IP68 protection, Class F insulation, double mechanical seal and stainless-steel welded shaft, this LEO submersible sewage pump is suitable for sewage tanks, wastewater treatment systems, factories, construction sites, septic tanks, hotels, restaurants, schools and public buildings.

Recommended Product Title

LEO 50 SWE 15-20-2.2L 3HP 2.2kW 2" Three Phase Sewage Submersible Pump

Short Product Description

LEO 50 SWE 15-20-2.2L is a 3 HP / 2.2 kW three-phase sewage submersible pump with a 2-inch discharge and 25 mm solid passage. It delivers approximately 750 L/min (45 m³/h) with a rated head of 20 m and maximum head of 23 m. Its enclosed double-channel anti-clogging impeller, IP68 motor protection, Class F insulation and double mechanical seal make it suitable for sewage, wastewater, industrial drainage, construction drainage and municipal applications.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - 50 SWE 15-20-2.2L