B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - 80 SWE 40-13-3L



The LEO 80 SWE 40-13-3L is a heavy-duty three-phase submersible sewage and wastewater pump equipped with a 3.0 kW / 4 HP motor and a 3-inch (80 mm) discharge. It belongs to LEO's SWE series, which uses a high-efficiency, clogging-resistant enclosed-channel impeller for wastewater containing suspended solids. The model has a rated flow of 40 m³/h at 13 m head, a maximum flow of approximately 76 m³/h, and a maximum head of 21 m. The maximum solid passage is 30 mm.

Product Specifications

Specification Details
Brand LEO
Series SWE Submersible Sewage Pump
Model 80 SWE 40-13-3L
Pump Type Submersible Sewage / Wastewater Pump
Motor Power 3.0 kW / 4 HP
Voltage 415 V
Frequency 50 Hz
Phase 3 Phase
Motor Speed 2-Pole / approx. 3,000 RPM
Discharge Size 3" / 80 mm
Rated Flow 40 m³/h / approx. 667 L/min
Rated Head 13 m
Maximum Flow 76 m³/h
Maximum Head 21 m
Maximum Solid Passage 30 mm
Impeller Type Enclosed Double-Channel
Motor Winding Copper
Insulation Class F
Protection Class IPX8 / IP68 class
Mechanical Seal Double-End Mechanical Seal
Shaft Stainless-Steel Welded Shaft
Maximum Liquid Temperature 40°C
Permitted Liquid pH 4–10
Maximum Immersion Depth 10 m
Cable Length 10 m
Connection Hose / Pipe / Quick Coupling
Approx. Gross Weight 54.4 kg
Packing Dimensions Approx. 874 × 284 × 363 mm

The exact LEO catalogue identifies the 80SWE40-13-3L with an 80 mm / 3-inch outlet, 3 kW motor, 4 HP rating, 40 m³/h rated flow, 76 m³/h maximum flow, 13 m rated head, 21 m maximum head and 30 mm maximum solid passage.

Key Features

3.0 kW / 4 HP three-phase motor:
The 3 kW motor provides the power required for commercial, industrial and municipal wastewater pumping. The Malaysian product listing specifies a 415 V supply and rated flow of approximately 666 L/min at 13 m head.

High-volume wastewater handling:
The pump has a rated capacity of 40 m³/h, equivalent to approximately 667 L/min, while the published maximum hydraulic flow is 76 m³/h. This makes it suitable for high-volume sewage and wastewater drainage.

13 m rated head:
The model is designed around a rated operating head of 13 m, with a published maximum head of 21 m. The actual operating point will depend on discharge-pipe length, diameter, fittings, elevation and system resistance.

3-inch discharge:
The 80 mm / 3-inch discharge provides a practical connection size for commercial and industrial wastewater systems.

Enclosed double-channel impeller:
The SWE series uses a high-efficiency, clogging-resistant enclosed-channel impeller. This design provides efficient hydraulic performance while allowing appropriately sized suspended solids to pass through the pump.

30 mm solid passage:
The 80 SWE 40-13-3L has a maximum solid-passage specification of 30 mm, making it suitable for wastewater containing appropriately sized suspended solids.

Submersible construction:
The pump and motor are close-coupled and designed to operate while submerged. This eliminates the need for a conventional surface-mounted suction arrangement and helps avoid problems associated with insufficient NPSH.

IPX8/IP68-class protection:
LEO's SWE documentation specifies IPX8 protection for the submersible motor, while product listings commonly identify the pump as IP68-class equipment. This is intended for reliable operation in submerged environments.

Class F insulation:
The motor uses Class F insulation, suitable for the thermal requirements of demanding submersible pump operation.

Double mechanical seal:
The pump uses double-end mechanical seals to help prevent wastewater from entering the motor chamber and to protect the internal motor components.

Stainless-steel welded shaft:
The SWE series incorporates a stainless-steel welded shaft, providing durability and corrosion resistance in wastewater environments.

Performance Data

Performance Parameter Specification
Motor Power 3.0 kW
Motor Rating 4 HP
Rated Flow 40 m³/h
Rated Flow Approx. 667 L/min
Rated Head 13 m
Maximum Flow 76 m³/h
Maximum Head 21 m
Maximum Solid Passage 30 mm
Outlet 3" / 80 mm
Speed Approx. 3,000 RPM
Voltage 415 V
Frequency 50 Hz
Phase 3 Phase

The 40 m³/h at 13 m figures represent the model's nominal duty designation, while 76 m³/h and 21 m are published maximum hydraulic values. These maximum values should not be interpreted as being achieved simultaneously.

Impeller Design

The 80 SWE 40-13-3L uses an enclosed double-channel impeller, rather than the cutter/grinder configuration used in LEO's QG models.

This impeller design provides:

  • High hydraulic efficiency
  • Good wastewater handling
  • Reduced clogging tendency
  • Passage for suspended solids
  • Stable pumping performance
  • Suitability for general sewage and wastewater

LEO specifically describes the SWE series as using a highly efficient, clogging-resistant enclosed-channel impeller.

The 30 mm solid passage is an important selection parameter. If the wastewater contains larger, long-string or particularly difficult solids, the application should be evaluated before selecting this pump. A standard SWE pump should not be treated as equivalent to a cutter/grinder pump.

Operating Conditions

Published LEO SWE-series operating conditions include:

  • Frequency: 50 Hz
  • Motor: 2-pole
  • Insulation: Class F
  • Protection: IPX8
  • Maximum liquid temperature: 40°C
  • Liquid pH: approximately 4–10
  • Maximum immersion depth: approximately 10 m
  • Double-end mechanical seals
  • Stainless-steel welded shaft
  • Copper motor winding

LEO's broader sewage-pump documentation also specifies a 10 m maximum immersion depth, 40°C maximum liquid temperature and 4–10 pH range for the applicable submersible sewage-pump range.

Typical Applications

The LEO 80 SWE 40-13-3L is suitable for:

  • Sewage drainage
  • Wastewater pumping
  • Factory wastewater
  • Construction-site drainage
  • Commercial building drainage
  • Municipal wastewater systems
  • Sewage treatment plants
  • Drainage stations
  • Septic tanks
  • Accumulated-water removal
  • Industrial wastewater
  • Food-processing wastewater
  • Leather-factory wastewater
  • Stock-farm wastewater
  • Hotels
  • Restaurants
  • Schools
  • Public buildings

LEO identifies wastewater drainage from attenuation tanks, purification tanks and sewage tanks, fibrous wastewater from leather and food-processing factories, sewage management, septic tanks, stock farms, hotels, restaurants, schools and public buildings as SWE-series applications.

Installation Options

The SWE series is designed for flexible installation and can be connected using:

  • Flexible hose
  • Rigid pipe
  • Quick-coupling system
  • Suitable permanent discharge piping

This allows the pump to be used for both temporary drainage and permanent wastewater installations.

For permanent installations, a suitable auto-coupling or guide-rail arrangement can be used where required by the installation design.

Construction & Protection

The LEO 80 SWE 40-13-3L incorporates:

  • Heavy-duty submersible pump construction
  • Enclosed double-channel impeller
  • 3-inch discharge
  • 30 mm solid passage
  • Copper motor winding
  • Class F insulation
  • IPX8/IP68-class submersible protection
  • Double mechanical seal
  • Stainless-steel welded shaft
  • Ball bearings
  • 10 m power cable
  • Flexible installation options

LEO's SWE-series documentation confirms the use of ball bearings, double-end mechanical seals and stainless-steel welded shafts.

Dimensions & Weight

Published LEO catalogue information gives the following approximate packing specifications:

Packing length: 874 mm
Packing width: 284 mm
Packing height: 363 mm
Gross weight: approximately 54.4 kg

The technical dimensional drawing for the 80 SWE models indicates approximately:

  • L1: 265 mm
  • L2: 223 mm
  • L3: 112 mm
  • L4: 160 mm
  • Overall H: 557 mm
  • H1: 86 mm
  • Discharge D: 80 mm
  • D1: 150 mm
  • D2: 18 mm
  • Mounting dimension M: 16 mm

Actual installation dimensions should be checked against the supplied pump and current manufacturer drawing before fabricating pipework or mounting arrangements.

Model Number Explanation

80 SWE 40-13-3L

  • 80 – 80 mm / 3-inch discharge class
  • SWE – LEO enclosed-channel submersible sewage pump series
  • 40 – nominal flow designation, approximately 40 m³/h
  • 13 – nominal head designation, approximately 13 m
  • 3 – 3.0 kW motor power
  • L – SWE-series model/configuration designation

The model therefore represents a 3-inch, 4 HP three-phase SWE sewage pump designed for approximately 40 m³/h at 13 m nominal head.

Difference Between SWE and WQ/QG Models

For product selection, the 80 SWE 40-13-3L should not be confused with the similarly sized 80 WQ 40-13-3 or 80 WQ 40-12-3 T/QG.

Feature 80 SWE 40-13-3L WQ/QG Equivalent
Pump Series SWE WQ / QG
Motor 3 kW / 4 HP 3 kW / 4 HP
Discharge 3" 3"
Impeller Enclosed Double-Channel QG Cutter / Grinder on QG version
Solid Passage 30 mm Model-dependent
Rated Flow 40 m³/h Model-dependent
Rated Head 13 m Model-dependent
Cutter No Yes on QG
Main Strength Efficient wastewater handling Improved handling of suitable fibrous/organic solids

The SWE model is therefore a good choice where efficient sewage/wastewater pumping and a 30 mm solids passage are sufficient. A QG cutter model is more appropriate when the wastewater has a known tendency to clog conventional impellers with long fibres or similar materials.

Installation Considerations

For the 415 V three-phase 3 kW version:

  • Do not operate the pump dry.
  • Ensure adequate liquid level before starting.
  • Verify correct three-phase rotation.
  • Provide appropriate overload and short-circuit protection.
  • Ensure proper electrical earthing.
  • Use correctly sized 3-inch discharge piping.
  • Do not exceed the specified immersion depth.
  • Keep liquid temperature within the 40°C limit.
  • Ensure wastewater chemistry remains within the specified pH range.
  • Check the cable and mechanical seal before commissioning.
  • Provide appropriate lifting and securing arrangements.
  • Follow LEO's installation and maintenance requirements.

SEO Product Description

LEO 80 SWE 40-13-3L 4HP 3.0kW 3" Three Phase Sewage Submersible Pump is a heavy-duty wastewater and sewage pump designed for efficient drainage in factories, construction sites, commercial facilities, sewage treatment plants and other wastewater systems. Powered by a 3.0 kW / 4 HP three-phase motor, the pump delivers a rated flow of approximately 40 m³/h (667 L/min) at 13 m rated head, with a maximum flow of approximately 76 m³/h and maximum head of 21 m. Its enclosed double-channel clog-resistant impeller provides a 30 mm solids passage, while IPX8/IP68-class protection, Class F insulation, double mechanical seals, copper motor winding and a stainless-steel welded shaft provide reliable performance in demanding submerged wastewater applications.

Recommended Product Title

LEO 80 SWE 40-13-3L 4HP 3.0kW 3" Three Phase Sewage Submersible Pump

Short Product Description

LEO 80 SWE 40-13-3L is a 4 HP / 3.0 kW three-phase sewage submersible pump with a 3-inch discharge and 30 mm solid passage. It provides approximately 40 m³/h (667 L/min) rated flow at 13 m head, with a maximum flow of 76 m³/h and maximum head of 21 m. Its enclosed double-channel anti-clogging impeller, IPX8/IP68-class protection, Class F insulation and double mechanical seal make it suitable for sewage, wastewater, industrial drainage, construction drainage and municipal applications.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - 80 SWE 40-13-3L