B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - 32 SWPM 3.6-17-1.1L/QG



The LEO 32 SWPM 3.6-17-1.1L/QG is a compact single-phase submersible sewage pump with an integrated cutter/grinding system, designed for wastewater, sewage and contaminated-water transfer where fibrous or organic materials may cause clogging. It uses a 1.1 kW / 1.5 HP motor, 220 V single-phase power supply, and a 32 mm (1¼") discharge connection. The pump has a nominal flow of approximately 3.6 m³/h (60 L/min) and a nominal head of 17 m, with a published maximum flow of approximately 133 L/min.

The QG designation identifies the pump as a cutter/grinder configuration. Unlike the larger SWE models with conventional channel impellers, this model uses a semi-open vortex impeller combined with a cutting system, making it particularly suitable for sewage containing fibrous and organic materials.

Product Specifications

Specification Details
Brand LEO
Series SWP(m)-QG Sewage Submersible Pump
Model 32 SWPM 3.6-17-1.1L/QG
Pump Type Submersible Sewage Pump with Cutter
Motor Power 1.1 kW / 1.5 HP
Voltage 220 V
Frequency 50 Hz
Phase Single Phase
Motor Speed 2-Pole / Approx. 2,900–3,000 RPM
Discharge Size 32 mm / 1¼"
Nominal Flow 3.6 m³/h / 60 L/min
Nominal Head 17 m
Maximum Flow 133 L/min
Maximum Head 17 m
Impeller Type Semi-Open Vortex
Cutter System Yes
Solid Passage Cutter Configuration
Insulation Class F
Protection Class IPX8
Mechanical Seal Double-End Mechanical Seal
Shaft Stainless-Steel Welded Shaft
Motor Winding Copper
Bearing Ball Type
Liquid Temperature 0–40°C
Permitted Liquid pH 4–10
Maximum Immersion Depth 10 m*
Cable Length 10 m
Float Switch Included / Standard for ≤1.1 kW single-phase version
Installation Hose, pipe or quick coupling
Approx. Gross Weight 34 kg
Approx. Packing Size 749 × 289 × 368 mm

The exact model listing specifies 1.1 kW, 1.5 HP, 220 V, 50 Hz, 1¼-inch discharge, 133 L/min maximum flow, 17 m maximum head and approximately 34 kg gross weight.

*LEO documentation varies between catalogue generations regarding maximum immersion depth for this small SWP(m) range; some documentation specifies 5 m, while current product information lists 10 m. The installation manual supplied with the actual pump should take precedence.

Key Features

1.1 kW / 1.5 HP motor:
The pump is powered by a compact 1.1 kW / 1.5 HP single-phase motor, making it suitable for installations where a 220 V single-phase electrical supply is preferred.

Integrated cutter/grinder:
The QG cutter system is one of the main features of this model. It is designed to cut suitable fibrous and organic material before it is discharged, helping reduce the possibility of blockage in sewage pipework.

The technical construction includes a cutting ring and radial cutter, with the cutter components identified as stainless-steel material in LEO catalogue documentation.

Semi-open vortex impeller:
The pump uses a semi-open vortex impeller combined with the cutting mechanism. This configuration is intended for sewage and wastewater applications where solids and fibrous materials are present.

Compact 1¼-inch discharge:
The 32 mm / 1¼-inch discharge makes this pump suitable for smaller sewage systems, pressure sewage installations and applications where a compact discharge pipe is required.

60 L/min nominal capacity:
The model designation specifies a nominal flow of 3.6 m³/h, equivalent to approximately 60 L/min. Product literature also gives a maximum flow of approximately 133 L/min.

17 m nominal head:
The pump is designed for a nominal head of 17 m, making it suitable for applications requiring substantial vertical lifting relative to its compact motor size.

Automatic float switch:
For the single-phase 1.1 kW configuration, a float switch is specified as a standard accessory. This allows the pump to start and stop automatically according to the wastewater level when installed and adjusted correctly.

Cutter / Grinding System

The QG cutter system is designed specifically for wastewater applications where fibrous material can cause conventional sewage pumps to clog.

The cutter assembly includes:

  • Cutting ring
  • Radial cutting knife
  • Semi-open vortex impeller
  • Pump chamber

LEO's technical catalogue identifies the cutting ring and radial cutter as AISI 304 stainless steel, while the impeller and pump body use cast-iron components in the documented construction.

This arrangement is useful for wastewater containing materials such as:

  • Paper
  • Fibres
  • Cellulose
  • Textile-type materials
  • Organic sewage matter
  • Long-string materials
  • General domestic sewage solids

The cutter is not intended to make the pump suitable for unlimited hard, metallic, abrasive or oversized solids. Wastewater characteristics should always be checked before selection.

Performance Information

Performance Parameter Specification
Motor Power 1.1 kW
Motor Rating 1.5 HP
Voltage 220 V
Phase Single Phase
Nominal Flow 3.6 m³/h
Nominal Flow 60 L/min
Maximum Flow 133 L/min
Nominal Head 17 m
Maximum Head 17 m
Discharge 32 mm / 1¼"
Frequency 50 Hz
Motor 2-Pole
Insulation Class F
Protection IPX8

The manufacturer's catalogue identifies 3.6 m³/h as the nominal flow and 17 m as the nominal head for the 32SWPm3.6-17-1.1L/QG.

The actual flow delivered during operation will depend on the total dynamic head, pipe diameter, pipe length, bends, valves, elevation and other system resistance.

Motor & Electrical Protection

The motor is designed for 220 V / 50 Hz single-phase operation. The pump has Class F insulation and IPX8 protection, which are appropriate for submerged operation.

The 1.1 kW single-phase configuration is also specified with a float switch as a standard accessory. This is useful for automatic level control in pits, tanks and sewage collection chambers.

Suitable electrical protection should still be provided according to the installation requirements, including appropriate overload, short-circuit and earth-leakage protection.

Mechanical Construction

The pump is constructed for continuous exposure to wastewater and submerged operating conditions.

Important components include:

  • Cast-iron pump body
  • Cast-iron pump chamber
  • Semi-open vortex impeller
  • Stainless-steel cutting ring
  • Stainless-steel radial cutter
  • Oil chamber
  • Double mechanical seal
  • Stainless-steel welded shaft
  • Ball bearings
  • Copper motor winding

LEO's technical catalogue identifies the cutting ring and radial cutter as AISI 304, while the mechanical seal arrangement is specified as upper SiC/Carbon and lower SiC/SiC.

Mechanical Seal

The double-end mechanical seal protects the motor from wastewater ingress.

The documented seal arrangement uses:

  • Upper seal: SiC / Carbon
  • Lower seal: SiC / SiC

The lower silicon-carbide seal provides enhanced resistance in the wet side of the pump, while the double-seal arrangement provides additional protection to the motor chamber.

Operating Conditions

The pump is designed for wastewater within the following published conditions:

  • Liquid temperature: 0–40°C
  • Liquid pH: 4–10
  • Frequency: 50 Hz
  • Protection: IPX8
  • Insulation: Class F
  • Maximum immersion: refer to current supplied manual
  • Single-phase 220 V operation
  • Submersible operation

LEO documentation specifically identifies 0–40°C liquid temperature and pH 4–10 for the SWP(m) range.

Typical Applications

The LEO 32 SWPM 3.6-17-1.1L/QG is suitable for a wide range of small to medium sewage and wastewater applications, including:

  • Residential sewage drainage
  • Individual houses
  • Apartment buildings
  • Pressure sewage systems
  • Commercial buildings
  • Small factories
  • Small hospitals
  • Schools
  • Parks
  • Hotels
  • Restaurants
  • Septic tanks
  • Sewage collection tanks
  • Wastewater treatment systems
  • Food-processing wastewater
  • Leather-factory wastewater
  • Stock-farm wastewater
  • General contaminated-water drainage

LEO specifically identifies drainage from residences, apartment buildings, commercial buildings, industrial plants, small hospitals, schools and parks, as well as wastewater treatment tanks and septic systems.

Installation Flexibility

The compact SWP(m)-QG series supports several installation methods:

Flexible hose installation:
Suitable for temporary drainage and mobile pumping applications.

Rigid pipe installation:
Suitable for permanent sewage and wastewater systems.

Quick-coupling installation:
Useful for sewage pits where the pump needs to be removed periodically for servicing or inspection.

LEO specifically describes the series as supporting hoses, pipes or quick-coupling systems.

Dimensions & Weight

Published information for the exact model gives approximately:

Dimension / Weight Specification
Packing Length 749 mm
Packing Width 289 mm
Packing Height 368 mm
Gross Weight Approx. 34 kg

The LEO catalogue gives slightly different packaging dimensions of approximately 745 × 285 × 355 mm and a gross weight of approximately 34 kg for the model, reflecting differences between catalogue/package configurations.

A technical dimensional drawing gives approximately 473 mm overall pump height, with the 32 mm discharge connection.

For actual installation, use the dimensional drawing supplied with the specific pump rather than the outer carton dimensions.

Model Number Explanation

32 SWPM 3.6-17-1.1L/QG

  • 32 – nominal discharge size, 32 mm / 1¼"
  • SWP – submersible sewage pump series
  • M – single-phase motor configuration
  • 3.6 – nominal flow, approximately 3.6 m³/h
  • 17 – nominal head, 17 m
  • 1.1 – motor power, 1.1 kW
  • L – model/configuration designation
  • QG – cutter/grinding configuration

An important distinction is that SWPM denotes the single-phase version. LEO documentation identifies the equivalent three-phase model as 32 SWP 3.6-17-1.1L/QG, using a three-phase supply.

SWPM vs SWP

Feature 32 SWPM 3.6-17-1.1L/QG 32 SWP 3.6-17-1.1L/QG
Phase Single Phase Three Phase
Voltage 220 V 380/400 V class
Motor Power 1.1 kW / 1.5 HP 1.1 kW / 1.5 HP
Discharge 1¼" / 32 mm 1¼" / 32 mm
Nominal Flow 3.6 m³/h 3.6 m³/h
Nominal Head 17 m 17 m
Cutter Yes Yes
Float Switch Standard on single-phase ≤1.1 kW Not normally supplied as standard

LEO documentation confirms the “m” designation represents the single-phase 220 V version, while the version without “m” is the three-phase configuration.

Advantages

The main advantages of the 32 SWPM 3.6-17-1.1L/QG include:

  • Compact 1.1 kW motor
  • Single-phase 220 V operation
  • Integrated cutter/grinder
  • Semi-open vortex impeller
  • 17 m head capability
  • 1¼-inch compact discharge
  • Double mechanical seal
  • Stainless-steel shaft
  • AISI 304 cutter components
  • IPX8 submersible protection
  • Class F motor insulation
  • Automatic float switch
  • Flexible installation options
  • Suitable for fibrous wastewater
  • Suitable for residential and commercial sewage systems

Installation Recommendations

For reliable operation:

  1. Ensure the pump remains adequately submerged during operation.
  2. Do not allow the motor to run dry.
  3. Install the pump vertically and securely where applicable.
  4. Use correctly sized 1¼-inch discharge piping.
  5. Avoid excessive pipe bends and unnecessary restrictions.
  6. Ensure the cutter is not exposed to oversized hard objects.
  7. Connect the float switch correctly where automatic level control is required.
  8. Provide appropriate electrical protection.
  9. Ensure proper earthing.
  10. Check the mechanical seal and power cable before commissioning.
  11. Keep liquid temperature within 0–40°C.
  12. Keep liquid pH within 4–10.
  13. Follow the manufacturer's maintenance and installation instructions.

SEO Product Description

LEO 32 SWPM 3.6-17-1.1L/QG 1.5HP 1.1kW 1¼" 220V Cutter Sewage Submersible Pump is a compact and powerful single-phase sewage pump designed for residential, commercial, industrial and wastewater drainage applications. Equipped with a 1.1 kW / 1.5 HP 220 V motor, the pump delivers a nominal flow of approximately 3.6 m³/h (60 L/min) at a 17 m head, with a maximum flow of approximately 133 L/min. Its semi-open vortex impeller and integrated QG cutter system are designed to handle suitable fibrous and organic sewage materials while reducing clogging. The pump features IPX8 protection, Class F insulation, double mechanical seal, stainless-steel welded shaft, AISI 304 cutter components and a standard float switch for automatic level control. It is suitable for septic tanks, sewage pits, apartment buildings, restaurants, hotels, schools, small hospitals, factories and wastewater treatment systems.

Recommended Product Title

LEO 32 SWPM 3.6-17-1.1L/QG 1.5HP 1.1kW 1¼" 220V Cutter Sewage Submersible Pump

Short Product Description

LEO 32 SWPM 3.6-17-1.1L/QG is a 1.5 HP / 1.1 kW 220 V single-phase cutter sewage submersible pump with a 1¼-inch discharge. It provides approximately 3.6 m³/h (60 L/min) nominal flow at 17 m head, with a published maximum flow of 133 L/min. The pump features a semi-open vortex impeller, integrated cutter/grinding system, double mechanical seal, stainless-steel shaft, IPX8 protection and Class F insulation, making it suitable for sewage pits, septic tanks, residential drainage, commercial wastewater and small industrial wastewater systems.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - 32 SWPM 3.6-17-1.1L/QG