The LEO 32 SWP 3.6-23-1.5L/QG is a compact, high-head three-phase submersible sewage pump with an integrated cutter/grinding system, designed for sewage, wastewater and pressure sewage applications. It is equipped with a 1.5 kW / 2 HP motor, 415 V three-phase power supply, and a 32 mm (1¼") discharge. The pump has a rated flow of 3.6 m³/h (60 L/min) at a rated head of 23 m, with maximum hydraulic performance of approximately 10 m³/h flow and 23.2 m head.
The QG configuration incorporates a semi-open vortex impeller and grinding/cutting system, allowing suitable fibrous and organic sewage materials to be reduced before discharge. This makes it particularly suitable for applications where a conventional sewage pump may be more susceptible to clogging.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Series | SWP(m)-QG Sewage Submersible Pump |
| Model | 32 SWP 3.6-23-1.5L/QG |
| Pump Type | Submersible Sewage Pump with Cutter |
| Motor Power | 1.5 kW / 2 HP |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Phase | 3 Phase |
| Motor Speed | 2-Pole / Approx. 2,900–3,000 RPM |
| Discharge Size | 32 mm / 1¼" |
| Rated Flow | 3.6 m³/h / 60 L/min |
| Rated Head | 23 m |
| Maximum Flow | Approx. 10 m³/h |
| Maximum Head | 23.2 m |
| Impeller Type | Semi-Open Vortex |
| Cutter System | Yes |
| Motor Winding | Copper |
| Insulation Class | F |
| Protection Class | IP68 / IPX8 |
| Mechanical Seal | Double-End Mechanical Seal |
| Shaft | Stainless-Steel Welded Shaft |
| Bearing | Ball Type |
| Liquid Temperature | 0–40°C |
| Permitted Liquid pH | 4–10 |
| Maximum Immersion Depth | Up to 10 m, subject to applicable documentation |
| Cable Length | 10 m |
| Float Switch | Not included |
| Installation | Hose, Pipe or Quick Coupling |
| Approx. Gross Weight | 42 kg |
| Approx. Packing Dimensions | 924 × 284 × 363 mm |
The exact product listing specifies 1.5 kW, 2 HP, 415 V, 50 Hz, 1¼-inch discharge, 23 m maximum head, 133 L/min maximum flow and approximately 42 kg gross weight.
LEO's technical catalogue gives the hydraulic model data as 3.6 m³/h rated flow, 10 m³/h maximum flow, 23 m rated head and 23.2 m maximum head.
Key Features
1.5 kW / 2 HP three-phase motor:
The pump uses a 1.5 kW / 2 HP motor operating from a 415 V, 50 Hz three-phase supply. This configuration is particularly suitable for commercial, industrial, municipal and pressure-sewage installations where three-phase power is available.
High-head performance:
With a rated head of 23 m, this model is designed for applications requiring relatively high discharge pressure despite its compact 1¼-inch outlet. The published maximum head is approximately 23.2 m.
Compact 1¼-inch discharge:
The 32 mm / 1¼-inch discharge allows the pump to be used in smaller-diameter sewage and pressure sewage pipe systems.
Semi-open vortex impeller:
The pump uses a semi-open vortex impeller combined with the cutter system. This configuration is designed to handle wastewater containing suitable solids and fibrous materials while maintaining a relatively compact pump size.
Integrated grinding/cutting system:
The QG cutter helps reduce suitable sewage solids and fibrous materials before they enter the discharge pipe. This can reduce the likelihood of pipe blockage in applications containing paper, fibres and organic sewage matter.
IP68 protection:
The motor is designed for submerged operation and is specified with IP68-class protection, helping protect the electrical components from water ingress during normal submerged use.
Class F insulation:
The motor uses Class F insulation, providing suitable thermal insulation for demanding pump operation.
Double mechanical seal:
The double-end mechanical sealing arrangement provides additional protection against wastewater entering the motor chamber.
Stainless-steel welded shaft:
The pump uses a stainless-steel welded shaft designed for durability and resistance to the corrosive conditions commonly encountered in wastewater applications.
Cutter / Grinding System
The QG suffix is important when selecting this pump. It indicates the cutter/grinding configuration.
The cutting system is intended to process suitable fibrous and organic materials before discharge. Typical materials encountered in sewage applications can include:
- Paper
- Cellulose
- Fibrous waste
- Textile-type fibres
- Organic sewage matter
- Long-string materials
- General domestic sewage solids
The technical documentation for the SWP(m)-QG series describes the design as a semi-open impeller with a reliable grinding system. The larger impeller develops pressure while the grinding system reduces suitable solids to help them pass through the discharge piping without clogging.
The cutter should not be regarded as a universal grinder for hard metal, stones, glass or highly abrasive solids. Actual wastewater composition should be considered when selecting the pump.
Hydraulic Performance
| Parameter | Specification |
|---|---|
| Rated Flow | 3.6 m³/h |
| Rated Flow | 60 L/min |
| Maximum Flow | Approx. 10 m³/h |
| Maximum Flow | Approx. 167 L/min |
| Rated Head | 23 m |
| Maximum Head | Approx. 23.2 m |
| Discharge | 32 mm / 1¼" |
| Motor Power | 1.5 kW |
| Motor Rating | 2 HP |
| Speed | 2-Pole / Approx. 3,000 RPM |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Phase | 3 Phase |
The manufacturer's catalogue gives 3.6 m³/h as the nominal flow and 23 m as the nominal head. The maximum hydraulic figures are approximately 10 m³/h and 23.2 m, respectively.
These figures represent different points on the pump's performance curve. Maximum flow and maximum head should not be interpreted as simultaneous operating conditions.
High-Head Application
The 32 SWP 3.6-23-1.5L/QG is particularly useful where a sewage pump needs to deliver wastewater through a relatively small discharge pipe while overcoming significant static elevation and pipe resistance.
Typical situations include:
- Pressure sewage systems
- Basement sewage pits
- Deep collection tanks
- Individual residential sewage systems
- Small commercial sewage stations
- Long discharge pipe runs
- Buildings with significant vertical lift
- Wastewater transfer systems
The exact operating flow will depend on the total dynamic head of the installation, including vertical elevation, pipe length, pipe diameter, elbows, valves and other fittings.
Motor & Electrical System
The pump uses:
Motor power: 1.5 kW
Motor rating: 2 HP
Supply: 415 V
Frequency: 50 Hz
Phase: 3 Phase
Motor type: 2-pole
Insulation: Class F
Protection: IP68/IPX8 class
Because this is the three-phase 1.5 kW version, it does not use the standard float-switch arrangement specified for the smaller single-phase SWPM models. The exact product listing states without auto float switch.
A suitable control panel, overload protection, short-circuit protection and earth-leakage protection should be selected according to the installation requirements.
Mechanical Construction
The pump is designed for submerged sewage and wastewater applications and incorporates:
- Cast-iron pump construction
- Semi-open vortex impeller
- Integrated cutter system
- Stainless-steel cutting components
- Stainless-steel welded shaft
- Double mechanical seal
- Ball bearings
- Copper motor winding
- Oil/seal chamber
- IP68/IPX8-class motor protection
The cutter system and mechanical components are designed to withstand the mechanical demands associated with wastewater pumping.
Operating Conditions
Published LEO SWP-series specifications include:
- Liquid temperature: 0–40°C
- Liquid pH: 4–10
- Frequency: 50 Hz
- Motor: 2-pole
- Insulation class: F
- Protection class: IP68/IPX8
- Ball-type bearings
- Double-end mechanical seals
- Submersible operation
- Maximum immersion depth: documentation-dependent
One Malaysian listing specifies 10 m maximum immersion depth, while another LEO-related technical listing specifies 5 m for the SWP series. Therefore, for an actual installation, the maximum immersion depth stated on the supplied model's nameplate/manual should take precedence.
Typical Applications
The LEO 32 SWP 3.6-23-1.5L/QG is suitable for:
- Pressure sewage systems
- Residential sewage drainage
- Apartment buildings
- Commercial buildings
- Industrial plants
- Small hospitals
- Schools
- Parks
- Hotels
- Restaurants
- Septic tanks
- Sewage collection tanks
- Wastewater treatment systems
- Construction drainage
- Factory wastewater
- Food-processing wastewater
- Leather-factory wastewater
- Stock-farm wastewater
LEO-related product documentation specifically identifies individual residences, apartment buildings, commercial buildings, industrial plants, small hospitals, schools and parks, together with wastewater treatment and sewage systems, as suitable applications.
Installation Options
The pump supports flexible installation methods:
Flexible hose:
Suitable for temporary drainage and mobile sewage pumping.
Rigid pipe:
Suitable for permanent wastewater and sewage systems.
Quick coupling:
Useful for fixed sewage pits where the pump needs to be removed for maintenance.
LEO documentation specifically describes installation using hoses, pipes or quick-coupling systems.
Dimensions & Weight
Published information for this exact model gives:
| Dimension / Weight | Specification |
|---|---|
| Packing Length | 924 mm |
| Packing Width | 284 mm |
| Packing Height | 363 mm |
| Gross Weight | Approx. 42 kg |
A separate Malaysian listing gives approximate overall dimensions of 95 × 30 × 40 cm for the product.
For installation planning, the manufacturer's actual dimensional drawing should be used rather than relying on carton dimensions.
Model Number Explanation
32 SWP 3.6-23-1.5L/QG
- 32 – nominal discharge diameter, 32 mm / 1¼"
- SWP – submersible sewage pump series
- 3.6 – nominal flow, 3.6 m³/h
- 23 – nominal head, 23 m
- 1.5 – motor power, 1.5 kW
- L – model/configuration designation
- QG – cutter/grinding configuration
LEO's technical catalogue confirms this model designation and identifies the 32 SWP 3.6-23-1.5L/QG as the three-phase counterpart to the 32 SWPM 3.6-23-1.5L/QG single-phase version.
32 SWP vs 32 SWPM
| Feature | 32 SWP 3.6-23-1.5L/QG | 32 SWPM 3.6-23-1.5L/QG |
|---|---|---|
| Phase | 3 Phase | Single Phase |
| Voltage | 415 V | 220/230 V |
| Motor Power | 1.5 kW / 2 HP | 1.5 kW / 2 HP |
| Discharge | 1¼" / 32 mm | 1¼" / 32 mm |
| Rated Flow | 3.6 m³/h | 3.6 m³/h |
| Rated Head | 23 m | 23 m |
| Cutter | Yes | Yes |
| Impeller | Semi-open vortex | Semi-open vortex |
| Float Switch | Not included | Not generally standard at 1.5 kW |
| Application | Industrial / commercial / municipal | Single-phase installations |
The key distinction is the electrical configuration, not the basic hydraulic model. A current Malaysian listing also shows the 230 V and 415 V versions as separate variants of the same 2 HP model.
Advantages
The main advantages of the 32 SWP 3.6-23-1.5L/QG include:
- 2 HP / 1.5 kW motor
- 415 V three-phase operation
- High 23 m rated head
- Compact 1¼-inch discharge
- Integrated cutter/grinder
- Semi-open vortex impeller
- Reduced risk of clogging with suitable fibrous sewage
- IP68/IPX8-class submersible protection
- Class F motor insulation
- Double mechanical seal
- Stainless-steel shaft
- Flexible installation
- Suitable for pressure sewage systems
- Suitable for residential, commercial and industrial wastewater
Installation Considerations
For reliable operation:
- Do not operate the pump dry.
- Ensure the pump remains adequately submerged.
- Verify correct three-phase phase rotation before commissioning.
- Install suitable overload protection.
- Provide short-circuit and earth-leakage protection.
- Ensure proper electrical earthing.
- Use correctly sized 1¼-inch discharge piping.
- Avoid unnecessary pipe restrictions.
- Keep liquid temperature within 0–40°C.
- Keep wastewater pH within 4–10.
- Do not exceed the applicable maximum immersion depth.
- Prevent stones, metal objects and other unsuitable hard materials from entering the cutter.
- Inspect the power cable and mechanical seal before commissioning.
- Follow the manufacturer's installation and maintenance requirements.
SEO Product Description
LEO 32 SWP 3.6-23-1.5L/QG 2HP 1.5kW 1¼" 415V Three Phase Cutter Sewage Submersible Pump is a compact high-head sewage and wastewater pump designed for pressure sewage systems, residential drainage, commercial buildings, industrial plants and wastewater treatment applications. Powered by a 1.5 kW / 2 HP 415 V three-phase motor, it provides a rated flow of approximately 3.6 m³/h (60 L/min) at a 23 m rated head, with maximum hydraulic performance of approximately 10 m³/h flow and 23.2 m head. The pump features a semi-open vortex impeller and integrated QG grinding/cutter system to help process suitable fibrous and organic sewage materials. Its IP68/IPX8-class protection, Class F insulation, double mechanical seal, stainless-steel welded shaft and robust submersible construction make it suitable for demanding sewage and wastewater installations.
Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - 32 SWP 3.6-23-1.5L/QG