The LEO LKS-900S is a compact stainless-steel multistage submersible pressure pump designed for clean-water transfer, rainwater recovery, garden irrigation, sprinkler systems, wells, tanks, cisterns and other applications requiring relatively high discharge pressure. It uses a 0.9 kW motor, operates on 230 V single-phase power, and has a 1-inch discharge connection. The pump incorporates multiple impellers to generate high head from a compact submerged unit.
The current LEO technical data shows the LKS-900S producing up to approximately 31.5 m head at 0.5 m³/h, with the performance reducing to approximately 7.5 m head at 6.5 m³/h. The pump's nominal power is 0.9 kW, and the published maximum liquid temperature is 35°C.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Model | LKS-900S |
| Product Type | Stainless Steel Multistage Submersible Pump |
| Pump Series | LKS-S |
| Application | Clean Water / Garden / Rainwater / Tank Pumping |
| Motor Power | 0.9 kW |
| Motor Rating | Approx. 1.25 HP |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Discharge Size | 1" |
| Pump Type | Multistage Submersible |
| Maximum Head | Approx. 31.5 m |
| Maximum Flow | Approx. 6.5 m³/h* |
| Maximum Flow | Approx. 108 L/min* |
| Maximum Liquid Temperature | 35°C |
| Maximum Particle Size | 1 mm |
| Maximum Immersion Depth | 5 m |
| Motor Protection | IPX8 |
| Insulation Class | F |
| Motor Winding | Copper |
| Motor Protection | Integrated Thermal Protection |
| Pump Body / Jacket | Stainless Steel |
| Control | Float Switch |
| Approx. Pump Dimensions | 163 × 163 × 455 mm |
| Approx. Gross Weight | 11.2 kg |
| Approx. Packing Dimensions | 488 × 250 × 210 mm |
*The LEO hydraulic table extends to 6.5 m³/h / 108 L/min, at which point the available head is approximately 7.5 m. It should therefore be treated as the upper end of the published performance curve rather than a simultaneous maximum-head/max-flow rating.
Main Features
0.9 kW / approximately 1.25 HP motor
The LKS-900S is equipped with a 0.9 kW single-phase motor suitable for standard domestic and light-commercial electrical installations. LEO's current European documentation specifies 230 V operation.
Multistage impeller design
The pump uses a multistage hydraulic arrangement. Multiple impellers and diffusers progressively increase the water pressure, allowing the relatively compact pump to achieve a maximum head of approximately 31.5 m.
Stainless-steel construction
The LKS-S documentation specifies a stainless-steel jacket/body, while older LEO technical literature identifies the pump body as AISI 304 stainless steel. This construction provides good corrosion resistance and is appropriate for clean-water and rainwater applications.
High-pressure water delivery
The LKS-900S is designed for applications where a conventional low-head drainage pump is insufficient. The multistage design provides approximately 31.5 m head at low flow, making it suitable for supplying water to sprinklers, garden irrigation systems and elevated discharge points.
Integrated thermal protection
The motor incorporates thermal protection, helping protect the winding against excessive temperature during abnormal operating conditions.
IPX8 protection
The motor has an IPX8 protection rating, allowing the pump to operate in submerged conditions within the manufacturer's specified installation limits.
Class F insulation
The motor is manufactured with Class F insulation, providing appropriate thermal protection for the motor winding.
Float switch
The technical exploded view identifies a float switch as part of the LKS-900S assembly. This allows water-level-based automatic operation in suitable installations.
Hydraulic Performance
The LEO performance table provides the following operating points for the LKS-900S:
| Flow | Flow | Approx. Head |
|---|---|---|
| 0.5 m³/h | 8 L/min | 31.5 m |
| 1.0 m³/h | 17 L/min | 31.0 m |
| 1.5 m³/h | 25 L/min | 30.0 m |
| 2.0 m³/h | 33 L/min | 28.5 m |
| 2.5 m³/h | 42 L/min | 27.5 m |
| 3.0 m³/h | 50 L/min | 26.0 m |
| 3.5 m³/h | 58 L/min | 23.5 m |
| 4.0 m³/h | 67 L/min | 22.0 m |
| 4.5 m³/h | 75 L/min | 19.0 m |
| 5.0 m³/h | 83 L/min | 17.5 m |
| 5.5 m³/h | 92 L/min | 14.5 m |
| 6.0 m³/h | 100 L/min | 11.0 m |
| 6.5 m³/h | 108 L/min | 7.5 m |
These values come directly from the LEO LKS-S hydraulic performance data.
This curve is important when selecting the pump. For example, the pump can produce approximately 22 m head at 4.0 m³/h, whereas at approximately 6.0 m³/h, available head falls to around 11 m.
Pump Construction
The LKS-900S incorporates a compact vertical multistage design with the following principal components:
- Stainless-steel outer jacket
- Multistage impellers
- Diffusers
- Stainless-steel / corrosion-resistant pump components
- Mechanical seal
- Bearings
- Copper motor winding
- Integrated thermal protection
- Float switch
- Strainer
- Base
- 1-inch discharge connection
The manufacturer's exploded view identifies the impellers, multiple diffusers, mechanical seal, rotor, stator, bearings, float switch, strainer and stainless-steel jacket as major components.
Stainless-Steel Construction
The stainless-steel body is particularly useful in applications where corrosion resistance and long service life are important.
LEO's technical documentation identifies the pump body as AISI 304 stainless steel.
This makes the LKS-900S suitable for:
- Rainwater
- Clean stored water
- Cistern water
- Tank water
- Pond water
- Well water
- Garden irrigation water
It should not be selected for aggressive chemicals, seawater or heavily contaminated wastewater unless the fluid compatibility has been specifically verified.
Water Quality Requirements
The LKS-900S is a clean-water-oriented pump, not a sewage pump.
The manufacturer specifies a maximum particle diameter of 1 mm.
Therefore, the pump is appropriate for relatively clean water but is not intended for:
- Sewage
- Sludge
- Mud
- Heavy wastewater
- Large suspended solids
- Fibrous waste
- Abrasive slurry
For sewage applications, a dedicated LEO sewage pump such as the WQ, SWE or SWP/QG series should be selected instead.
Typical Applications
The LEO LKS-900S is intended for applications such as:
- Rainwater harvesting
- Garden irrigation
- Small-scale irrigation
- Sprinkler systems
- Watering systems
- Water transfer from tanks
- Water transfer from cisterns
- Pond water pumping
- Well water pumping
- Domestic water supply
- Residential water transfer
- Water collection tanks
- Small agricultural applications
LEO specifically describes the LKS as suitable for rainwater systems, sprinklers, cisterns, tanks, ponds and wells, while its European documentation lists wells, tanks, domestic watering, small irrigation and rainwater recovery.
Installation
The LKS-900S is designed to operate while submerged.
Typical installation steps include:
- Position the pump vertically in the water source.
- Ensure the pump remains adequately submerged.
- Connect the discharge to the 1-inch outlet.
- Ensure the inlet strainer remains unobstructed.
- Position the float switch so it can move freely.
- Connect the pump to the correct 230 V single-phase supply.
- Ensure appropriate electrical protection and earthing.
- Check that the water temperature does not exceed 35°C.
- Ensure suspended particles remain within the specified 1 mm maximum.
- Do not operate the pump outside the manufacturer's specified immersion conditions.
The current LEO European documentation specifies a maximum immersion depth of 5 m.
Dimensions & Weight
The current LEO technical data lists:
| Dimension | Specification |
|---|---|
| Pump Length | 163 mm |
| Pump Width | 163 mm |
| Pump Height | 455 mm |
| Outlet | 1" |
| Gross Weight | 11.2 kg |
| Packing Length | 488 mm |
| Packing Width | 250 mm |
| Packing Height | 210 mm |
The compact 163 × 163 × 455 mm pump dimensions make it suitable for relatively confined tanks and water-storage installations.
Model Number Explanation
LKS-900S
- LKS – LEO LKS submersible pressure / well-pump series
- 900 – approximately 900 W / 0.9 kW motor rating
- S – stainless-steel jacket/body configuration
LEO's identification data describes the model as LKS-900S, with 0.9 kW power and a stainless-steel jacket.
Advantages
The main advantages of the LEO LKS-900S include:
- 0.9 kW / approximately 1.25 HP motor
- 230 V single-phase operation
- Multistage high-pressure design
- Maximum head of approximately 31.5 m
- Flow capacity extending to approximately 6.5 m³/h
- Stainless-steel construction
- 1-inch discharge
- Integrated thermal motor protection
- IPX8 protection
- Class F insulation
- Float-switch control
- Compact dimensions
- Suitable for rainwater recovery
- Suitable for garden irrigation
- Suitable for sprinklers
- Suitable for tanks, cisterns and wells
LKS-900S vs Conventional Drainage Pump
The LKS-900S is designed primarily for pressure and water transfer, rather than high-volume drainage.
| Feature | LKS-900S |
|---|---|
| Pump Type | Multistage Submersible |
| Primary Purpose | High-pressure water transfer |
| Motor | 0.9 kW |
| Voltage | 230 V |
| Discharge | 1" |
| Max. Head | Approx. 31.5 m |
| Published Curve Flow Range | 0.5–6.5 m³/h |
| Max. Particle Size | 1 mm |
| Water Type | Clean / relatively clean water |
| Construction | Stainless Steel |
| Thermal Protection | Yes |
| Float Switch | Yes |
The multistage hydraulic design is the key characteristic: it prioritizes higher pressure/head rather than the large solid-handling capacity associated with sewage pumps.
SEO Product Description
LEO LKS-900S 1.25HP 0.9kW 230V 1" Stainless Steel Multistage Submersible Pump is a compact high-pressure submersible pump designed for rainwater harvesting, garden irrigation, sprinkler systems, wells, cisterns, tanks and domestic water transfer. Equipped with a 0.9 kW single-phase motor and a multistage impeller system, the pump delivers up to approximately 31.5 m head and provides a published performance range up to approximately 6.5 m³/h (108 L/min) depending on operating head. Its stainless-steel construction, IPX8 protection, Class F insulation, integrated thermal protection and float switch provide reliable operation for clean-water pumping applications. The pump features a 1-inch discharge and is suitable for residential, garden, irrigation and rainwater recovery systems.
Inquiry - LEO STAINLESS STEEL SUBMERSIBLE - LKS-900S