B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO STAINLESS STEEL SUBMERSIBLE - LKS-1102SE



The LEO LKS-1102SE is a high-pressure automatic stainless-steel multistage submersible pump designed for clean-water supply from wells, tanks, reservoirs and rainwater collection systems. It combines a 1.1 kW / 1.5 HP single-phase motor, multistage hydraulics and an integrated electronic pressure/flow control system that automatically starts and stops the pump according to water demand.

With a maximum head of approximately 45 m and a published maximum flow of approximately 5.5–6.0 m³/h, the LKS-1102SE is particularly suitable where a compact submerged pump is required to deliver pressurized clean water for domestic use, garden watering and small-scale irrigation.

Product Specifications

Specification Details
Brand LEO
Model LKS-1102SE
Pump Type Automatic Stainless-Steel Multistage Submersible Pump
Application Clean Water / Water Supply / Irrigation
Motor Power 1.1 kW / 1.5 HP
Voltage 220–240 V
Frequency 50 Hz
Phase Single Phase
Maximum Flow Approx. 5.5–6.0 m³/h
Maximum Flow Approx. 92–100 L/min
Maximum Head 45 m
Discharge 1" / DN25
Pump Construction Stainless Steel
Pump Body Material AISI 304 Stainless Steel
Impeller Multistage
Motor Winding Copper
Control System Integrated Electronic Automatic Control
Automatic Operation Yes
Dry-Running Protection Yes
Built-In Check Valve Yes
Thermal Protection Yes
Insulation Class F
Protection Class IPX8
Maximum Liquid Temperature 35°C
Maximum Immersion Depth 12 m
Maximum Particle Diameter 1 mm
Pump Height Approx. 493 mm
Pump Diameter / Width Approx. 163 mm
Approx. Pump Weight 11.6 kg
Discharge Connection 1"

LEO's current European technical data lists the LKS-1102SE at 1.1 kW, with a maximum head of 45 m and hydraulic performance extending to 5.5 m³/h. Malaysian listings commonly advertise the pump as 1.5 HP, 220 V, 100 L/min maximum flow and 45 m maximum head.

Main Features

1.1 kW / 1.5 HP Motor

The LKS-1102SE uses a 1.1 kW / 1.5 HP single-phase motor designed for standard 220–240 V domestic electrical supplies. The motor incorporates thermal protection and Class F insulation.

High-Pressure Multistage Design

The pump uses multiple impellers and diffusers to generate high discharge pressure from a relatively compact submersible package. It can produce up to approximately 45 m of head, making it suitable for elevated water delivery and pressurized irrigation systems.

Stainless-Steel Pump Body

The pump jacket/body is manufactured from AISI 304 stainless steel, providing good corrosion resistance for clean-water applications and long-term submerged use.

Integrated Automatic Control

A major feature of the SE version is the integrated electronic control system. The pump automatically starts when water demand is detected and stops when demand ceases. This removes the need for a conventional external pressure-control arrangement in many installations.

Dry-Running Protection

The integrated control system provides dry-running protection. If insufficient water is available, the control system protects the pump against damage caused by operating without adequate water.

Built-In Check Valve

The pump incorporates an integrated non-return/check valve, helping prevent the discharge line from draining back through the pump when it stops.

IPX8 Protection

The motor has an IPX8 protection rating, allowing the pump to operate in submerged conditions within the specified installation limits.

Class F Insulation

The motor uses Class F insulation, providing appropriate thermal protection for continuous water-pumping applications.

Hydraulic Performance

The LEO technical curve gives the following approximate operating points for the LKS-1102SE:

Flow Flow Approx. Head
0.5 m³/h 8 L/min 45.0 m
1.0 m³/h 17 L/min 43.7 m
1.5 m³/h 25 L/min 42.0 m
2.0 m³/h 33 L/min 39.6 m
2.5 m³/h 42 L/min 36.5 m
3.0 m³/h 50 L/min 32.5 m
3.5 m³/h 58 L/min 28.0 m
4.0 m³/h 67 L/min 22.7 m
4.5 m³/h 75 L/min 17.1 m
5.0 m³/h 83 L/min 11.0 m
5.5 m³/h 92 L/min 5.0 m

These are points along the pump's hydraulic performance curve, not simultaneous maximum-flow and maximum-head values.

For example, at approximately 3.0 m³/h, the pump can develop around 32.5 m head, while at approximately 4.0 m³/h, available head is around 22.7 m.

Automatic Pressure Control

The LKS-1102SE differs from a conventional submersible pump because the electronic control system is integrated into the pump.

The control system provides:

  • Automatic start
  • Automatic stop
  • Flow detection
  • Pressure control
  • Dry-running protection
  • Automatic reset functionality
  • Built-in check valve

This makes the pump particularly convenient for applications where water needs to be supplied automatically whenever a tap, sprinkler or irrigation outlet is opened.

Dry-Running Protection

Dry-running protection is particularly important for wells, rainwater tanks and storage reservoirs because the available water level can fluctuate.

If the pump detects insufficient water, the electronic control system can stop the pump to protect the motor and hydraulic components. The manufacturer's documentation describes automatic programmed reset functionality for restoring operation when water becomes available again.

Stainless-Steel Construction

The pump's AISI 304 stainless-steel jacket provides improved corrosion resistance compared with conventional painted cast-iron pump bodies.

This makes the LKS-1102SE particularly appropriate for:

  • Rainwater
  • Stored clean water
  • Tank water
  • Cistern water
  • Well water
  • Garden irrigation water
  • Domestic water supply

However, it is not a sewage pump and should not be used for wastewater containing large solids, fibrous material or abrasive slurry.

Water Quality

The LKS-1102SE is intended for clean water without abrasive particles. The specified maximum particle diameter is approximately 1 mm.

Suitable fluids include:

  • Clean freshwater
  • Rainwater
  • Stored tank water
  • Well water
  • Reservoir water
  • Irrigation water

It is not designed for:

  • Sewage
  • Sludge
  • Mud
  • Heavy wastewater
  • Abrasive slurry
  • Large suspended solids
  • Fibrous waste

For sewage applications, a dedicated LEO WQ, SWE or SWP/QG sewage pump should be used.

Typical Applications

The LEO LKS-1102SE is suitable for:

  • Domestic water supply
  • Well water pumping
  • Rainwater harvesting
  • Water storage tanks
  • Cisterns
  • Garden watering
  • Small-scale irrigation
  • Sprinkler systems
  • Water transfer
  • Reservoir pumping
  • Agricultural watering
  • Small pressure-water systems

LEO specifically identifies wells, tanks, rainwater recovery, domestic watering and small irrigation systems as applications for the LKS-SE series.

Installation

The LKS-1102SE is designed for vertical submerged installation.

Recommended installation considerations include:

  1. Position the pump securely in the water source.
  2. Ensure the pump remains adequately submerged.
  3. Connect the discharge to the 1-inch outlet.
  4. Use suitable pipework for the required flow and pressure.
  5. Ensure the inlet remains free from obstruction.
  6. Connect to the correct 220–240 V single-phase supply.
  7. Provide suitable electrical protection and earthing.
  8. Keep the liquid temperature below 35°C.
  9. Do not exceed the specified immersion depth.
  10. Ensure the pumped water contains no excessive abrasive particles.

LEO's current European documentation specifies a maximum immersion depth of 12 m and maximum liquid temperature of 35°C.

Dimensions & Weight

The current LEO technical data gives:

Dimension / Weight Specification
Pump Diameter / Width 163 mm
Pump Height 493 mm
Discharge DN25 / 1"
Pump Weight 11.6 kg
Packing Length 260 mm
Packing Width 215 mm
Packing Height 565 mm
Packing Weight 11.6 kg

 

Some Malaysian distributors list slightly different packed dimensions and weights, reflecting packaging variations. For installation, the manufacturer's dimensional drawing should be used rather than carton dimensions.

LKS-1102SE Performance at Different Flow Rates

For product selection, the following simplified guide is useful:

Required Flow Approx. Available Head
1 m³/h 43.7 m
2 m³/h 39.6 m
3 m³/h 32.5 m
4 m³/h 22.7 m
5 m³/h 11.0 m
5.5 m³/h 5.0 m

This illustrates why the pump should be selected according to the actual system duty point, rather than simply using the advertised maximum of 45 m head.

LKS-1102SE vs LKS-900S

Feature LKS-1102SE LKS-900S
Motor Power 1.1 kW 0.9 kW
Motor Rating 1.5 HP Approx. 1.25 HP
Voltage 220–240 V 230 V
Maximum Head 45 m Approx. 31.5–35 m
Maximum Flow Approx. 5.5–6 m³/h Approx. 6–6.5 m³/h
Discharge 1" 1"
Pump Type Multistage Multistage
Automatic Control Integrated Model-dependent
Dry-Running Protection Yes Yes
Check Valve Built-in —
Stainless Steel Yes Yes
Max. Liquid Temperature 35°C 35°C
Main Advantage Higher pressure/head Lower power requirement

The LKS-1102SE is the stronger choice when the application requires significantly higher pressure or elevation, while the LKS-900S is suitable where lower power consumption and moderate head are sufficient.

Model Number Explanation

LKS-1102SE

  • LKS – LEO LKS submersible pressure-pump series
  • 1102 – 1.1 kW-class motor designation
  • S – stainless-steel pump construction
  • E – integrated electronic automatic control

LEO's identification code explicitly describes the LKS-1102SE as a stainless-steel submersible pump with an automatic/electronic device.

There is also an LKS-1102SE-1 variant. The "-1" version is the side-inlet configuration, intended for applications where a floating suction hose can be connected, particularly rainwater systems.

Key Advantages

The LEO LKS-1102SE offers:

  • 1.1 kW / 1.5 HP motor
  • 220–240 V single-phase operation
  • Maximum head of approximately 45 m
  • Flow capacity up to approximately 5.5–6 m³/h
  • Stainless-steel AISI 304 pump body
  • Multistage high-pressure design
  • Integrated electronic control
  • Automatic start/stop
  • Dry-running protection
  • Built-in check valve
  • Integrated thermal protection
  • Class F insulation
  • IPX8 protection
  • 1-inch discharge
  • Compact construction
  • Suitable for wells, tanks and rainwater systems

SEO Product Description

LEO LKS-1102SE 1.5HP 1.1kW 220V 1" Stainless Steel Automatic Multistage Submersible Pump is a high-pressure automatic water pump designed for wells, tanks, reservoirs, rainwater harvesting, domestic water supply, garden watering and small-scale irrigation. Powered by a 1.1 kW / 1.5 HP single-phase motor, the pump provides up to approximately 45 m maximum head and a maximum flow capacity of approximately 5.5–6.0 m³/h, depending on the operating head. Its AISI 304 stainless-steel pump body, multistage impeller design, integrated electronic control, dry-running protection, built-in check valve, thermal protection, Class F insulation and IPX8 protection provide reliable automatic water-pressure delivery. The compact 1-inch discharge design makes it suitable for residential water systems, rainwater tanks, wells, gardens and small irrigation installations.



 Inquiry - LEO STAINLESS STEEL SUBMERSIBLE - LKS-1102SE