The LEO XQS 15-30/2-1.1I is a 1.5 HP / 1.1 kW single-phase stainless-steel submersible pump designed for water transfer, irrigation, drainage and general clean-water pumping. It features a 2-inch discharge, a high-head multistage hydraulic design, stainless-steel welded shaft, copper motor winding, built-in thermal protection and IP68 motor protection. The published maximum performance is approximately 15 m³/h flow and 30 m head.
The XQS series is intended for applications such as well-water pumping, garden and field irrigation, household water supply, rainwater and accumulated-water drainage, construction drainage and livestock-farm water systems. It is designed for vertical submerged installation with a maximum immersion depth of approximately 5 m.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Model | XQS 15-30/2-1.1I |
| Product Type | Stainless Steel Submersible Pump |
| Pump Series | XQS |
| Motor Power | 1.1 kW / 1.5 HP |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Discharge Outlet | 2" / 50 mm |
| Maximum Flow | 15 m³/h |
| Maximum Flow | 250 L/min |
| Maximum Head | 30 m |
| Maximum Pressure | Approx. 3 bar |
| Motor Winding | Copper |
| Shaft | Stainless-Steel Welded Shaft |
| Pump Construction | Stainless Steel / Cast Iron Components |
| Impeller | Cast Iron |
| Insulation Class | B |
| Protection Class | IP68 |
| Thermal Protection | Built-In |
| Maximum Immersion Depth | 5 m |
| Maximum Liquid Temperature | 40°C |
| Recommended pH | 6.5–8 |
| Maximum Particle Size | Refer to manufacturer's operating specification |
| Installation | Vertical Submerged |
| Float Switch | Automatic version available/configuration dependent |
| Approx. Gross Weight | 23.3 kg |
| Packing Dimensions | 555 × 290 × 220 mm |
| Outlet Connection | 2" |
LEO's XQS technical information specifies 1.1 kW / 1.5 HP, 220 V / 50 Hz, 250 L/min maximum flow and 30 m maximum head for this model. The published packing weight is approximately 23.3 kg with a packing size of 555 × 290 × 220 mm.
High-Head Submersible Design
The XQS 15-30/2-1.1I is designed for applications requiring both substantial water volume and relatively high lifting height. Its maximum head of approximately 30 m makes it suitable for transferring water from wells, tanks, reservoirs and collection pits to higher discharge points.
The 2-inch discharge provides a substantially larger water passage than smaller 1-inch or 1¼-inch submersible pumps, allowing the pump to handle higher water volumes with appropriately sized discharge piping.
The maximum hydraulic performance should not be interpreted as 15 m³/h at 30 m head simultaneously. The actual flow depends on the system's total dynamic head, including vertical lift, pipe length, pipe diameter, elbows, valves and other fittings. The manufacturer’s performance curve should be used to determine the actual duty point.
1.1 kW / 1.5 HP Motor
The pump is powered by a 1.1 kW / 1.5 HP single-phase motor operating at 220 V, 50 Hz.
The motor incorporates:
- Copper winding
- Built-in thermal protector
- Stainless-steel welded shaft
- Class B insulation
- IP68 protection
The built-in thermal protection helps protect the motor winding against excessive temperature caused by abnormal operating conditions.
Stainless-Steel Construction
The XQS series combines stainless-steel components with robust cast-iron hydraulic components. The stainless-steel welded shaft is designed to provide corrosion resistance and mechanical durability during submerged operation.
Available technical information identifies the XQS construction as including AISI 304 stainless-steel components, while the impeller and certain hydraulic components use HT200 cast iron.
This construction makes the pump appropriate for general water transfer and irrigation applications where durability and corrosion resistance are important.
Multistage High-Head Hydraulic System
The XQS 15-30/2-1.1I uses a multistage-impeller design to generate higher pressure from a compact submersible pump. The design is particularly useful when the installation requires considerable vertical lift.
Typical applications include:
- Pumping from wells
- Tank-to-tank water transfer
- Garden irrigation
- Field irrigation
- Sprinkler systems
- Domestic water transfer
- Construction-site water drainage
- Rainwater drainage
- Surface-water transfer
- Livestock water systems
LEO identifies the XQS range for urban well-water pumping, field irrigation and drainage, garden irrigation, household water supply, industrial accumulated-water drainage and construction water supply/drainage.
Hydraulic Performance
The published maximum hydraulic specifications are:
| Parameter | Performance |
|---|---|
| Maximum Flow | 15 m³/h |
| Maximum Flow | 250 L/min |
| Maximum Head | 30 m |
| Approx. Maximum Pressure | 3 bar |
| Discharge | 2" / 50 mm |
| Motor Power | 1.1 kW / 1.5 HP |
A third-party technical listing also confirms 250 L/min maximum flow and 30 m maximum head for the exact XQS15-30/2-1.1I model.
For a real installation, the pump should be selected according to the required flow + total dynamic head, rather than simply using the maximum values.
IP68 Protection
The motor is rated IP68, making it suitable for continuous submerged operation within the manufacturer's specified conditions.
The IP68 protection is particularly important for applications involving:
- Wells
- Water tanks
- Reservoirs
- Drainage pits
- Collection tanks
- Irrigation sources
- Rainwater storage
LEO specifies a maximum immersion depth of 5 m for the XQS series.
Class B Motor Insulation
The XQS motor uses Class B insulation. Together with the built-in thermal protector, this provides protection for the motor winding during normal operating conditions and helps prevent overheating under abnormal loads.
Water Temperature & Fluid Conditions
The XQS series is designed primarily for water and water-like liquids.
Published operating conditions include:
- Maximum liquid temperature: 40°C
- Recommended liquid pH: 6.5–8
- Maximum immersion depth: 5 m
- Installation: vertical
- Suitable for clean or slightly contaminated water depending on the application
The XQS should not be treated as a dedicated sewage grinder or heavy-duty sludge pump. For wastewater containing significant solids, fibres or abrasive material, a dedicated LEO sewage pump should be selected instead.
Typical Applications
The LEO XQS 15-30/2-1.1I can be used for:
Agricultural applications
- Field irrigation
- Farm water transfer
- Garden irrigation
- Greenhouse irrigation
- Livestock water supply
Domestic applications
- Well-water transfer
- Household water supply
- Water tank filling
- Garden watering
- Rainwater transfer
Construction applications
- Excavation drainage
- Temporary site drainage
- Accumulated-water removal
- Water transfer around construction sites
General industrial applications
- Process-water transfer
- Equipment cooling-water transfer
- Collection-tank drainage
- General water transfer
LEO's XQS documentation specifically includes agriculture, household, gardening, industry, construction and drainage applications.
2-Inch Discharge
The 2-inch / 50 mm discharge is an important feature of this model.
A correctly sized 2-inch discharge line helps the pump deliver its intended hydraulic performance while reducing unnecessary friction losses. Using an undersized discharge pipe over a long run can significantly reduce actual flow and increase the system's total dynamic head.
For installations with long discharge distances, the pipe diameter should be selected based on the required flow rate rather than simply matching the pump outlet.
Automatic Float-Switch Operation
The XQS family is available in float-controlled configurations, allowing automatic starting and stopping according to the water level. Malaysian product information specifically describes the XQS15-30/2-1.1I as an automatic submersible pump with float switch.
The float switch can be useful for:
- Automatic tank drainage
- Water-level-controlled pumping
- Collection pits
- Rainwater tanks
- Irrigation reservoirs
- Domestic water storage
The exact float-switch arrangement should be verified against the supplied unit because configurations can vary by market and product revision.
Pump Dimensions & Weight
Published data for the exact model gives:
| Dimension / Weight | Specification |
|---|---|
| Overall Packing Length | 555 mm |
| Overall Packing Width | 290 mm |
| Overall Packing Height | 220 mm |
| Gross Weight | Approx. 23.3 kg |
| Outlet Diameter | 50 mm / 2" |
The manufacturer's catalogue data also identifies the model's approximate packing size as 555 × 290 × 220 mm and gross weight as 23.3 kg.
Model Number Explanation
XQS 15-30/2-1.1I
- XQS – LEO stainless-steel submersible pump series
- 15 – nominal maximum flow of approximately 15 m³/h
- 30 – maximum head of approximately 30 m
- /2 – 2-inch discharge configuration
- 1.1 – 1.1 kW motor
- I – model/configuration designation
The technical table confirms the relationship between the model designation, 1.1 kW power, 1.5 HP rating, 50 mm outlet, 250 L/min maximum flow and 30 m maximum head.
Key Advantages
The LEO XQS 15-30/2-1.1I offers:
- 1.5 HP / 1.1 kW motor
- 220 V single-phase operation
- 2-inch large discharge
- Up to 15 m³/h flow
- Up to 30 m head
- Multistage high-head hydraulic design
- Stainless-steel welded shaft
- Copper motor winding
- Built-in thermal protection
- Class B insulation
- IP68 protection
- Maximum immersion depth of 5 m
- Suitable for irrigation and water transfer
- Suitable for wells, tanks and reservoirs
- Suitable for construction drainage
- Suitable for garden and agricultural applications
XQS 15-30/2-1.1I vs XQS 15-20/1.1I
| Specification | XQS 15-30/2-1.1I | XQS 15-20/1.1I |
|---|---|---|
| Motor Power | 1.1 kW / 1.5 HP | 1.1 kW / 1.5 HP |
| Voltage | 220 V | 220 V |
| Maximum Flow | 15 m³/h | 15 m³/h |
| Maximum Head | 30 m | 20 m |
| Discharge | 2" | 1¼" |
| Main Characteristic | Higher head | Higher-flow/lower-head application |
| Typical Use | High-lift water transfer | General water transfer/drainage |
The XQS 15-30/2-1.1I should be selected when the installation requires the additional 10 m of maximum head and a larger 2-inch discharge. The XQS15-20/1.1I is more appropriate for lower-head applications.
Installation Recommendations
For reliable operation:
- Install the pump vertically.
- Ensure the pump is adequately submerged before starting.
- Do not exceed the 5 m maximum immersion depth.
- Use a suitable 2-inch discharge pipe.
- Avoid excessive restrictions in the discharge line.
- Ensure the inlet is free from large debris.
- Connect the 220 V supply through appropriate electrical protection.
- Ensure proper grounding/earthing.
- Allow the float switch to move freely where fitted.
- Avoid continuous operation outside the specified liquid temperature range.
- Do not use the pump for heavy sewage or abrasive slurry.
- Inspect the cable, seals and hydraulic components periodically.
- Do not run the pump dry unless the manufacturer's control system specifically permits it.
SEO Product Description
LEO XQS 15-30/2-1.1I 1.5HP 1.1kW 220V 2" Stainless Steel Submersible Water Pump is a high-head submersible pump designed for water transfer, agricultural irrigation, garden watering, well pumping, tank drainage, construction drainage and domestic water supply. Powered by a 1.1 kW / 1.5 HP 220 V single-phase motor, it delivers up to approximately 15 m³/h (250 L/min) with a maximum head of 30 m. The pump features a 2-inch discharge, multistage impeller design, stainless-steel welded shaft, copper motor winding, built-in thermal protection, Class B insulation and IP68 protection. Its robust construction and 5 m maximum immersion capability make it suitable for wells, reservoirs, water tanks, irrigation systems, construction sites and general water-transfer applications.
Inquiry - LEO STAINLESS STEEL SUBMERSIBLE - XQS 15-30/2-1.1I