The LEO XQS 14.5-42/3-1.5I is a heavy-duty 2 HP / 1.5 kW single-phase stainless-steel submersible pump designed for high-head water transfer, irrigation, drainage, wells, swimming pools, tanks, reservoirs and general clean or slightly contaminated water applications. It features a 2-inch discharge, maximum head of approximately 42 m, and maximum flow of approximately 14.5 m³/h (240 L/min) according to LEO's model-specific product information.
The pump combines a stainless-steel motor housing and shaft with HT200 cast-iron hydraulic components, copper motor winding, built-in thermal protection and IP68 protection. It is a 220 V, 50 Hz single-phase model with a float switch for automatic water-level operation.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Model | XQS 14.5-42/3-1.5I |
| Product Type | Stainless Steel Submersible Pump |
| Pump Series | XQS |
| Motor Power | 1.5 kW / 2 HP |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Maximum Flow | 14.5 m³/h |
| Maximum Flow | Approx. 240 L/min |
| Maximum Head | 42 m |
| Maximum Pressure | Approx. 4.2 bar |
| Discharge Size | 2" / 50 mm |
| Motor Winding | Copper |
| Motor Shaft | Stainless-Steel Welded Shaft |
| Motor Housing | HT200 Cast Iron / Stainless-Steel Configuration |
| Impeller | HT200 Cast Iron |
| Pump Body | HT200 Cast Iron with Stainless-Steel Housing |
| Mechanical Seal | Ceramic / Carbon |
| Insulation Class | B |
| Protection Class | IP68 |
| Thermal Protection | Built-In |
| Maximum Immersion Depth | 5 m |
| Maximum Liquid Temperature | 40°C |
| Recommended Liquid pH | 6.5–8 |
| Installation | Vertical Submerged |
| Float Switch | Yes |
| Approx. Gross Weight | 26.8 kg |
| Packing Dimensions | Approx. 625 × 285 × 205 mm |
The LEO product page specifies 14.4–14.5 m³/h maximum flow, 42 m maximum head, 1.5 kW power, 220 V single-phase operation, 5 m maximum immersion depth, 40°C maximum liquid temperature, Class B insulation and IP68 protection.
High-Head Submersible Performance
The XQS 14.5-42/3-1.5I is designed for applications where a submersible pump needs to overcome a substantial vertical lift.
Its published maximum hydraulic values are:
- Maximum flow: 14.5 m³/h
- Maximum flow: approximately 240 L/min
- Maximum head: 42 m
- Maximum pressure: approximately 4.2 bar
- Discharge: 2 inches
The 14.5 m³/h and 42 m figures represent different points on the pump performance curve, rather than simultaneous operating conditions. Actual flow will decrease as total system head increases.
For proper pump selection, the required duty point should be determined from the actual flow rate + total dynamic head, including elevation, pipe friction, valves, elbows and other fittings.
2 HP / 1.5 kW Motor
The pump is powered by a 1.5 kW / 2 HP single-phase motor operating at 220 V, 50 Hz. This makes it suitable for locations where standard single-phase electrical power is available.
The motor incorporates:
- Copper winding
- Built-in thermal protector
- Stainless-steel welded shaft
- Class B insulation
- IP68 protection
The built-in thermal protector helps protect the motor from excessive temperature during abnormal operating conditions.
Stainless-Steel & Cast-Iron Construction
Despite being marketed as a stainless-steel submersible pump, the XQS 14.5-42/3-1.5I is a combination-material design rather than a completely stainless-steel hydraulic assembly.
The construction includes:
- Stainless-steel motor housing/components
- Stainless-steel welded shaft
- HT200 cast-iron impeller
- HT200 cast-iron hydraulic components
- Carbon/ceramic mechanical seal
The LEO technical information identifies the shaft as stainless steel and the hydraulic components such as the impeller as HT200 cast iron.
This combination provides a balance between mechanical strength, corrosion resistance and cost.
Multistage / High-Head Hydraulic Configuration
The XQS 14.5-42/3-1.5I is configured for substantially higher head than the XQS 15-30/2-1.1I.
Its 42 m maximum head makes it suitable for:
- Deep water transfer
- Elevated storage tanks
- High-level irrigation
- Pressure irrigation
- Long discharge pipelines
- Well-water transfer
- Agricultural water supply
- Construction water transfer
The model is specifically listed for semi-deep wells, swimming-pool drainage, agricultural water pumping and pressurized irrigation.
Hydraulic Performance
| Parameter | Specification |
|---|---|
| Maximum Flow | 14.5 m³/h |
| Maximum Flow | Approx. 240 L/min |
| Maximum Head | 42 m |
| Maximum Pressure | Approx. 4.2 bar |
| Discharge | 2" / 50 mm |
| Motor Power | 1.5 kW / 2 HP |
Some secondary listings report the maximum flow as 250 L/min, while LEO's model-specific page specifies approximately 240 L/min / 14.4 m³/h. For a website product listing, 14.5 m³/h / 240 L/min is the safer model-specific specification.
2-Inch Discharge
The pump is equipped with a 2-inch / 50 mm discharge outlet.
This relatively large discharge allows the pump to move substantial quantities of water while helping reduce friction losses compared with smaller discharge connections.
The 2-inch outlet makes the pump particularly suitable for:
- Irrigation pipelines
- Water-transfer systems
- Swimming-pool drainage
- Tank filling
- Reservoir transfer
- Construction drainage
For long discharge runs, the pipe diameter should be selected according to the required flow and total pipe length rather than simply matching the pump outlet.
IP68 Protection
The motor is rated IP68, making it suitable for submerged operation within the manufacturer's specified conditions. LEO specifies a maximum immersion depth of 5 m for the XQS series.
This is suitable for applications involving:
- Wells
- Tanks
- Reservoirs
- Swimming pools
- Collection pits
- Irrigation ponds
- Drainage areas
The pump should remain sufficiently submerged during operation because the surrounding water provides the required cooling for the motor. Dry running can cause motor and mechanical-seal damage.
Float Switch & Automatic Operation
The single-phase XQS series incorporates a float switch, which automatically controls the pump according to water level. When the water level reaches the appropriate level, the float initiates operation; when the water level falls, it switches the pump off.
This is useful for:
- Automatic drainage
- Water-level control
- Tank emptying
- Pool drainage
- Rainwater collection
- Irrigation reservoirs
The float should always have sufficient free movement and should not be trapped against the tank wall or pipework.
Water Temperature & Fluid Conditions
The XQS series is designed for water and liquids with similar physical and chemical characteristics.
Published operating conditions include:
- Maximum liquid temperature: 40°C
- Recommended pH: 6.5–8
- Maximum immersion: 5 m
- Installation: Vertical
- Fluid: Clean or slightly contaminated water
LEO describes the XQS range as suitable for clean or slightly dirty water and similar liquids.
It should not be considered a dedicated sewage grinder pump. For heavy sewage containing significant solids, fibres or clogging materials, a dedicated LEO WQ/SWP/SWE sewage pump is more appropriate.
Typical Applications
The LEO XQS 14.5-42/3-1.5I is suitable for:
Agricultural
- Farm irrigation
- Field irrigation
- Garden irrigation
- Greenhouse irrigation
- Pressurized irrigation
- Livestock water supply
Domestic
- Well-water transfer
- Tank filling
- Reservoir transfer
- Swimming-pool drainage
- Household water transfer
- Garden watering
Construction
- Excavation drainage
- Temporary water removal
- Construction-site drainage
- Water transfer
Industrial
- Process-water transfer
- Cooling-water transfer
- Collection-tank drainage
- General water transfer
LEO's XQS documentation specifically lists urban well-water pumping, field irrigation and drainage, garden irrigation, household water supply, industrial accumulated-water drainage, construction water supply/drainage and livestock applications.
Suitable Water Sources
The pump can be used in:
- Wells
- Water tanks
- Reservoirs
- Irrigation ponds
- Swimming pools
- Rainwater collection tanks
- Collection pits
- Water reservoirs
The maximum immersion depth should remain within 5 m.
Mechanical Seal
The pump uses a carbon/ceramic mechanical seal. This sealing arrangement separates the motor chamber from the pumped liquid and helps prevent water ingress into the motor.
The mechanical seal is a critical wear component and should be inspected if the pump develops:
- Water leakage into the motor chamber
- Abnormal noise
- Reduced performance
- Excessive motor heating
- Unusual vibration
The XQS technical documentation identifies the mechanical-seal materials as ceramic/carbon.
Motor & Electrical Protection
The electrical system incorporates several protective characteristics:
Copper winding:
Provides good electrical conductivity and thermal performance.
Thermal protector:
Protects the motor against overheating.
Class B insulation:
Provides the specified thermal insulation rating for the motor.
IP68 protection:
Allows submerged operation within specified conditions.
These features are part of the XQS series' design for reliable submerged operation.
Dimensions & Weight
The LEO catalogue identifies the following packing data for the exact model:
| Dimension / Weight | Specification |
|---|---|
| Packing Length | 625 mm |
| Packing Width | 285 mm |
| Packing Height | 205 mm |
| Gross Weight | Approx. 26.8 kg |
The catalogue lists the XQS 14.5-42/3-1.5I at 26.8 kg, compared with approximately 23.3 kg for the XQS 15-30/2-1.1I.
A technical listing gives the approximate overall pump height as 567 mm, although packing dimensions should not be confused with the actual pump dimensions.
Model Number Explanation
XQS 14.5-42/3-1.5I
- XQS – LEO stainless-steel submersible pump series
- 14.5 – maximum flow approximately 14.5 m³/h
- 42 – maximum head approximately 42 m
- /3 – hydraulic/model configuration designation
- 1.5 – 1.5 kW motor
- I – model/configuration designation
The exact model is listed by LEO as XQS 14.5-42/3-1.5 I with 14.4 m³/h maximum flow, 42 m maximum head and 1.5 kW power.
XQS 14.5-42/3-1.5I vs XQS 15-30/2-1.1I
| Specification | XQS 14.5-42/3-1.5I | XQS 15-30/2-1.1I |
|---|---|---|
| Motor Power | 1.5 kW / 2 HP | 1.1 kW / 1.5 HP |
| Voltage | 220 V | 220 V |
| Phase | Single Phase | Single Phase |
| Maximum Flow | 14.5 m³/h | 15 m³/h |
| Maximum Head | 42 m | 30 m |
| Discharge | 2" | 2" |
| Maximum Pressure | Approx. 4.2 bar | Approx. 3 bar |
| Immersion Depth | 5 m | 5 m |
| Protection | IP68 | IP68 |
| Insulation | Class B | Class B |
| Main Advantage | Higher head | Lower power / slightly higher max flow |
The main difference is that the XQS 14.5-42/3-1.5I provides substantially greater head, making it the better choice for high-lift and pressure-irrigation applications.
Installation Recommendations
For reliable operation:
- Install the pump vertically.
- Ensure the pump is fully and adequately submerged before starting.
- Do not exceed the 5 m maximum immersion depth.
- Use suitable 2-inch discharge piping.
- Minimize unnecessary elbows and restrictions.
- Ensure the suction/inlet area is free from leaves and large debris.
- Use the supplied or appropriate float-switch arrangement.
- Connect the 220 V supply through suitable electrical protection.
- Ensure proper grounding/earthing.
- Do not operate the pump dry.
- Keep the pumped liquid below 40°C.
- Maintain the recommended fluid pH range of 6.5–8.
- Use a suitable strainer where leaves or debris are present.
- Inspect the mechanical seal and cable periodically.
- Do not use the pump for heavy sewage, thick sludge or highly abrasive liquids.
LEO specifically warns that the XQS pump relies on water for motor cooling and that dry running can damage the motor.
Key Advantages
The LEO XQS 14.5-42/3-1.5I offers:
- 2 HP / 1.5 kW motor
- 220 V single-phase operation
- 2-inch discharge
- 14.5 m³/h maximum flow
- 240 L/min maximum flow
- 42 m maximum head
- Approx. 4.2 bar maximum pressure
- Stainless-steel welded shaft
- Stainless-steel motor housing/configuration
- HT200 cast-iron hydraulic components
- Copper motor winding
- Carbon/ceramic mechanical seal
- Built-in thermal protection
- Class B insulation
- IP68 protection
- 5 m maximum immersion depth
- 40°C maximum liquid temperature
- Float-switch automatic operation
- Suitable for irrigation, drainage and water transfer
SEO Product Description
LEO XQS 14.5-42/3-1.5I 2HP 1.5kW 220V 2" Stainless Steel Submersible Water Pump is a high-head single-phase submersible pump designed for agricultural irrigation, garden watering, well-water transfer, swimming-pool drainage, tank drainage, construction drainage and general water transfer. Powered by a 1.5 kW / 2 HP 220 V motor, it delivers up to approximately 14.5 m³/h (240 L/min) with a maximum head of 42 m. The pump features a 2-inch discharge, stainless-steel welded shaft, copper motor winding, HT200 cast-iron impeller, carbon/ceramic mechanical seal, built-in thermal protection, Class B insulation and IP68 protection. With a maximum immersion depth of 5 m and automatic float-switch operation, it is suitable for wells, reservoirs, irrigation systems, tanks, pools and construction sites.
Inquiry - LEO STAINLESS STEEL SUBMERSIBLE - XQS 14.5-42/3-1.5I