B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO FOUNTAIN PUMPS - XKF-15P



The LEO XKF-15P is a compact, low-power 15 W submersible fountain pump designed for decorative fountains, pond water circulation, pond filtration and oxygen enrichment. It is the entry-level model in LEO's XKF fountain-pump range and is designed for continuous operation in clean water. LEO specifies a 220–240 V, 50 Hz supply, 850 L/h maximum flow, 1.0 m maximum head, 13 mm outlet and 10 m H05RN-F cable.

Product Description

The XKF-15P is designed to be installed fully submerged at the bottom of a pond, decorative water feature or small fountain. Its low-power motor provides continuous water circulation while consuming only 15 W, making it suitable for small decorative water installations where low operating energy consumption is important.

The pump is equipped with a plastic pump casing, making it lightweight and easy to position or relocate. LEO also provides interchangeable fountain nozzles for producing different water effects, including cascade, water bell, foaming jet, water lily and pelunica-style effects, depending on the supplied/accessory configuration.

Key Specifications

Specification XKF-15P
Brand LEO
Model XKF-15P
Product Type Submersible Fountain Pump
Application Fountain / Pond / Water Circulation
Motor Power 15 W
Voltage 220–240 V
Frequency 50 Hz
Phase Single Phase
Maximum Flow 850 L/h
Maximum Flow Approx. 14.2 L/min
Maximum Head 1.0 m
Outlet 13 mm
Power Cable H05RN-F
Cable Length 10 m
Pump Body Plastic
Installation Fully Submersible
Maximum Immersion Depth Up to 3 m
Maximum Fluid Temperature 35°C
Maximum Ambient Temperature 40°C
Protection IPX8-class submerged design
Weight Approx. 1 kg

LEO's official technical information lists 850 L/h maximum flow and 1.0 m maximum head, while another technical listing specifies a maximum immersion depth of 3 m and approximately 1 kg net weight.

Pump Performance

The XKF-15P is intended for short-distance, low-head water circulation, not pressure pumping.

Its maximum hydraulic figures are:

  • Maximum flow: 850 L/h
  • Maximum flow: approximately 14.2 L/min
  • Maximum head: 1.0 m
  • Power consumption: 15 W

The 850 L/h figure represents the maximum flow under favourable conditions and is not the flow that should be expected when the pump is operating at its full 1 m head. As the discharge height, hose length or piping resistance increases, actual flow will decrease.

For this reason, the XKF-15P is best suited to small fountains and decorative water features, particularly where the water does not need to be lifted significantly above the pump.

Fountain & Water Display Applications

The XKF-15P can be used for several decorative water effects. LEO identifies the XKF series for:

  • Pond fountains
  • Decorative garden ponds
  • Indoor water features
  • Small ornamental fountains
  • Pond water circulation
  • Pond filtration
  • Water oxygen enrichment
  • Cascade water effects
  • Water-bell fountain effects
  • Small water-lily-style displays

LEO specifically describes the XKF series as suitable for pond-water filtration, pond decoration and oxygen enrichment.

Fountain Nozzles

One of the useful characteristics of the XKF series is its ability to use different fountain nozzles to create different visual water patterns.

Available configurations/accessories can include:

Cascade: Produces a broader cascading water pattern suitable for decorative ponds and small waterfalls.

Water Bell: Creates a bell-shaped sheet of water around the nozzle.

Foaming Jet: Produces a more aerated, bubbling fountain effect.

Water Lily: Creates a decorative pattern resembling a water-lily formation.

Pelunica: Provides another ornamental fountain spray pattern.

LEO's catalogue indicates cascade and water-bell nozzles as standard, while other nozzle types can be available on request.

Construction & Design

Plastic Pump Casing
The XKF-15P uses a plastic pump body, keeping the pump lightweight and suitable for easy positioning inside ponds and fountain basins.

Compact Design
Its small 15 W motor makes it appropriate for smaller decorative installations where a larger fountain pump would be unnecessary.

Submersible Operation
The pump is designed to operate submerged, with the motor fully immersed in water during normal operation.

10 m Cable
The standard 10 m H05RN-F power cable provides useful installation reach for garden ponds and decorative fountain installations.

Operating Conditions

The XKF-15P is intended for clean water without fibrous materials or aggressive contaminants.

Published specifications indicate:

  • Fluid temperature: 0–35°C
  • Ambient temperature: up to 40°C
  • Maximum immersion: approximately 3 m
  • Maximum head: 1 m
  • Suitable liquid: clean water
  • Installation: submerged
  • Recommended operation: continuous circulation

A technical listing specifically states that the pump is intended for clean water without fibrous material and is designed for continuous operation in fountain and pond circulation applications.

Recommended Applications

The LEO XKF-15P is suitable for:

  1. Small garden fountains – Provides continuous water circulation for decorative displays.
  2. Pond circulation – Helps keep pond water moving.
  3. Pond oxygen enrichment – Water movement and fountain action can help promote oxygen exchange.
  4. Decorative water features – Suitable for indoor and outdoor ornamental installations.
  5. Small cascades – Can power a low-height cascade effect.
  6. Water-bell fountains – Suitable when paired with the appropriate nozzle.
  7. Pond filtration circulation – Can circulate water through a suitable small filtration system.
  8. Aquatic garden features – Suitable for small ornamental ponds and water gardens.

Advantages

  • Very low power consumption: only 15 W
  • Maximum flow of 850 L/h
  • Maximum head of 1 m
  • Compact and lightweight
  • Submersible installation
  • 10 m power cable
  • 13 mm outlet
  • Plastic pump construction
  • Suitable for continuous water circulation
  • Compatible with different fountain nozzles
  • Suitable for decorative fountains and ponds
  • Can contribute to pond oxygen enrichment
  • Suitable for indoor and outdoor water features

XKF Series Comparison

Model Power Max. Head Max. Flow Outlet Cable
XKF-15P 15 W 1.0 m 850 L/h 13 mm 10 m
XKF-20P 20 W 1.1 m 1,100 L/h 13 mm 10 m
XKF-35P 35 W 1.4 m 1,600 L/h 19 mm 10 m
XKF-55P 55 W 2.3 m 2,300 L/h 19 mm 10 m
XKF-75P 75 W 2.7 m 2,650 L/h 19 mm 10 m
XKF-95P 95 W 3.0 m 3,500 L/h 19 mm 10 m
XKF-110P 110 W 3.7 m 3,750 L/h 19 mm 10 m

The XKF-15P is therefore the smallest/lowest-power option in the current published XKF range, making it particularly appropriate for smaller decorative fountains where only a modest water flow is required.

Important Selection Note

The XKF-15P should not be selected as a general-purpose drainage or water-supply pump. Its 15 W motor and 1 m maximum head are specifically suited to decorative fountain circulation. For applications requiring water to be lifted several metres, moved through long pipe runs, or pumped at higher pressure, a larger XKF model or another LEO pump series should be selected.

For a fountain installation, the actual fountain height should also account for losses through the hose, fittings and nozzle. The pump's 1.0 m maximum head is the hydraulic limit, so the desired fountain effect should normally operate below this limit.

Technical Product Data

Brand: LEO
Model: XKF-15P
Category: Fountain Pump
Pump Type: Submersible Fountain Pump
Motor Power: 15 W
Voltage: 220–240 V
Frequency: 50 Hz
Phase: Single Phase
Maximum Flow: 850 L/h
Maximum Head: 1.0 m
Outlet: 13 mm
Cable: H05RN-F
Cable Length: 10 m
Pump Body: Plastic
Maximum Immersion Depth: 3 m
Fluid Temperature: 0–35°C
Ambient Temperature: Up to 40°C
Suitable Liquid: Clean water
Installation: Fully submerged
Application: Fountain, pond circulation, filtration and oxygen enrichment
Fountain Accessories: Cascade, water bell and other nozzle configurations available depending on package/accessory selection.

SEO Product Description

LEO XKF-15P 15W Submersible Fountain Pump is a compact and energy-efficient pump designed for decorative fountains, garden ponds, water features, pond circulation, filtration and oxygen enrichment. Operating on 220–240V, 50Hz, the XKF-15P consumes only 15W and delivers up to 850L/H, with a maximum head of 1.0 metre. The pump features a lightweight plastic casing, 13mm outlet and 10-metre H05RN-F power cable, allowing convenient installation in ponds and fountain basins. Designed for submerged operation with clean water, the LEO XKF-15P is suitable for creating decorative fountain effects such as cascades and water bells when used with the appropriate nozzle. Its compact construction, low energy consumption and continuous water-circulation capability make it an ideal choice for small ornamental fountains, garden ponds and indoor or outdoor water features.



 Inquiry - LEO FOUNTAIN PUMPS - XKF-15P