The LEO CONDE 22 is a high-capacity 125-litre swimming pool sand filtration system designed for above-ground and in-ground swimming pools, spas and other pool-water circulation applications. It combines a 125 L HDPE/PP filter tank, 7-way multiport valve, pressure gauge, connecting hose and a 6-finger/lateral filtration system. The system is designed for professional pool plumbing with 50 mm hard-pipe connections.
The CONDE 22 is specified with a 1.1 kW / 1.5 HP pump, a maximum pump flow of approximately 22,000 L/h, approximately 16,000 L/h filtration flow with sand, and approximately 16,800 L/h with Aqualoon filter balls. It has a 140 kg sand capacity or approximately 3,800 g Aqualoon capacity.
Product Description
The LEO CONDE 22 is designed to provide continuous circulation and filtration of swimming-pool water. Water is drawn from the pool through the circulation pump and passed through the filter tank, where suspended dirt and impurities are captured by the filtration medium before the filtered water is returned to the pool.
Its 7-way multiport valve allows the operator to select different operating modes for filtration and maintenance, while the pressure gauge provides a convenient indication of filter operating pressure. The tank incorporates a lateral/finger filtration assembly designed to distribute and collect water efficiently throughout the filtration bed.
Key Specifications
| Specification | LEO CONDE 22 |
|---|---|
| Brand | LEO |
| Model | CONDE 22 |
| Product Type | Pool Pump Filter / Sand Filter System |
| Filter Tank Volume | 125 L |
| Tank Diameter | 558 mm |
| Tank Height | 940 mm |
| Pump Power | 1.1 kW / 1.5 HP |
| Pump Flow Rate | 22,000 L/h |
| Pump Flow Rate | 22 m³/h |
| Sand Filtration Flow | 16,000 L/h |
| Aqualoon Filtration Flow | 16,800 L/h |
| Sand Capacity | 140 kg |
| Aqualoon Capacity | 3,800 g |
| Valve | 7-Way Multiport Valve |
| Filtration System | 6-Finger / Lateral |
| Connection | 50 mm hard pipe |
| Filter Tank Material | HDPE / Polypropylene |
| Pressure Gauge | Included |
| Connecting Hose | Included |
| Base Plate | Included |
| Application | Swimming Pool / Spa / Water Filtration |
The Malaysian LEO distributor specifies the CONDE 22 with a 125 L tank, 558 mm diameter, 940 mm height, minimum 1.1 kW pump requirement and 50 mm inlet/outlet connection.
125-Litre Filter Tank
The CONDE 22 uses a substantially larger 125-litre filter tank compared with the 75-litre DUKE models.
Published dimensions are approximately:
- Tank volume: 125 L
- Diameter: 558 mm
- Height: 940 mm
The larger filtration vessel provides a greater quantity of filtration media and filtration area, making the CONDE 22 suitable for higher-flow pool circulation systems.
The filter tank is made from corrosion-resistant plastic material. The associated CONDE 22 documentation describes the tank as high-grade polypropylene and resistant to commercially available swimming-pool chemicals when the pool's chemical parameters are maintained within recommended limits.
1.1 kW / 1.5 HP Pump
The CONDE 22 is specified with a:
1.1 kW / 1.5 HP pump
with a pump flow rating of approximately:
22,000 L/h / 22 m³/h.
The pump is described as a horizontal, self-priming centrifugal pump. The pump incorporates a hair-and-lint basket/pre-filter to help prevent larger debris from entering the hydraulic section.
The pump should be selected and operated according to the complete system's hydraulic requirements rather than assuming that the maximum 22,000 L/h rating will always be achieved.
Actual Filtration Flow
The CONDE 22 has different published flow figures depending on whether sand or Aqualoon is used.
Pump flow: 22,000 L/h
Sand filtration flow: 16,000 L/h
Aqualoon filtration flow: 16,800 L/h.
Therefore, the 22,000 L/h figure is the pump flow rating, while the approximately 16,000–16,800 L/h figures represent the filtration-system flow under the stated configurations.
For pool-system sizing, the actual operating flow will also depend on pipe friction, filter resistance, valves, fittings, elevation and other hydraulic restrictions.
Filter Sand Capacity
The CONDE 22 is specified for approximately:
140 kg of filter sand
This is substantially greater than the 60–75 kg quantities associated with the smaller 75-litre DUKE configurations.
The larger sand bed provides greater filtration capacity and allows the system to handle a higher volume of suspended contaminants before cleaning is required.
The correct sand grade and loading procedure should follow the installation manual supplied with the actual filter.
Aqualoon Filter Ball Capacity
The CONDE 22 can also be operated with Aqualoon filter balls.
Published capacity:
3,800 g / 8.4 lb
with an approximate filtration flow of:
16,800 L/h.
This gives users an alternative to traditional sand filtration while maintaining a relatively high filtration flow.
7-Way Multiport Valve
The CONDE 22 incorporates a 7-way multiport valve for controlling the direction and operating mode of the filtration system.
Typical functions include:
- FILTER – normal filtration.
- BACKWASH – reverses water flow through the filter medium.
- RINSE – flushes the filter after backwashing.
- WASTE/DRAIN – sends water directly to waste.
- RECIRCULATE – circulates water without passing through the filter medium.
- CLOSED – stops flow through the filter.
- WINTER/auxiliary – depending on the exact valve configuration.
The actual markings on the supplied valve should be followed.
6-Finger / Lateral Filtration System
The CONDE 22 features a 6-finger filtration system. The laterals are positioned within the tank and provide a large surface area for collecting filtered water.
The lateral design helps provide:
- More even water distribution
- Efficient filtration
- Large collection area
- Consistent flow through the filter media
- Self-cleaning characteristics during backwashing
The CONDE 22 documentation describes the laterals as full-flow and self-cleaning, with a large surface area intended to maximise flow.
50 mm Professional Connection
The CONDE 22 uses 50 mm hard-pipe connections for professional swimming-pool plumbing.
A 50 mm connection is appropriate for a filtration system capable of approximately 16–22 m³/h.
Correct pipe sizing is important because undersized pipework increases friction losses and can substantially reduce the actual flow delivered by the pump.
Pressure Gauge
An easy-to-read pressure gauge is included with the CONDE 22 filtration system.
The pressure gauge allows the operator to monitor filter pressure during normal operation.
A practical maintenance procedure is to record the pressure when the filter is clean. As dirt accumulates in the sand bed, resistance normally increases and the pressure rises.
A significant increase from the clean-filter pressure indicates that the filter may require backwashing.
Backwash Operation
The sand bed progressively accumulates dirt and suspended particles during normal filtration.
When the filter becomes dirty, the multiport valve can be placed into BACKWASH mode. Water is then forced through the filter bed in the reverse direction, lifting and flushing contaminants out of the sand.
The dirty water is discharged through the waste line.
A typical sequence is:
FILTER → BACKWASH → RINSE → FILTER
The pump should be switched off before changing the multiport valve position.
Typical Pool Installation
A typical CONDE 22 installation is:
Swimming Pool → Skimmer / Main Drain → Pool Pump → CONDE 22 Filter → Return Line → Swimming Pool
During normal filtration, pool water enters the pump and passes through the filter tank.
During backwashing, the valve redirects the water flow so contaminants are discharged to waste rather than returned to the swimming pool.
Applications
The LEO CONDE 22 can be used for:
- Residential swimming pools
- Larger above-ground pools
- In-ground swimming pools
- Pool filtration systems
- Spa systems
- Jacuzzi systems
- Water parks
- Clean-water circulation
- Suitable aquaculture applications
- Other compatible water-filtration installations
The CONDE 22 is specifically marketed as a pool filter system suitable for above-ground and in-ground pools.
Advantages
- 125 L large-capacity filter tank
- Approx. 558 mm tank diameter
- Approx. 940 mm tank height
- 1.1 kW / 1.5 HP pump
- Pump flow up to 22,000 L/h
- Sand filtration flow approximately 16,000 L/h
- Aqualoon filtration flow approximately 16,800 L/h
- 140 kg sand capacity
- 3,800 g Aqualoon capacity
- 7-way multiport valve
- 6-finger/lateral filtration system
- Easy-to-read pressure gauge
- 50 mm hard-pipe connection
- Connecting hose included
- Base plate included
- Self-priming centrifugal pump
- Pump pre-filter/hair and lint basket
- Corrosion-resistant filter tank
- Suitable for sand or Aqualoon media
- Suitable for above-ground and in-ground pool systems
CONDE 22 vs DUKE 51100
| Feature | CONDE 22 | DUKE 51100 |
|---|---|---|
| Tank Volume | 125 L | 75 L |
| Tank Diameter | 558 mm | 485 mm |
| Tank Height | 940 mm | 840 mm |
| Pump Power | 1.1 kW / 1.5 HP | 1.1 kW / 1.5 HP |
| Pump Flow | 22,000 L/h | 22,000 L/h |
| Sand Flow | 16,000 L/h | 16,380 L/h |
| Aqualoon Flow | 16,800 L/h | 17,000 L/h |
| Sand Capacity | 140 kg | 75 kg |
| Aqualoon Capacity | 3,800 g | 2,100 g |
| Valve | 7-Way | 7-Way |
| Filtration | 6-Finger / Lateral | 6-Finger / Lateral |
| Connection | 50 mm | 50 mm |
| Tank Size | Larger | Smaller |
| Application | Higher-capacity filtration system | Compact filtration system |
The principal advantage of the CONDE 22 is its much larger 125-litre filtration vessel and 140 kg sand capacity, while both systems use a 1.1 kW / 1.5 HP pump configuration.
Important Selection Note
The LEO CONDE 22 should not be selected solely according to the 22,000 L/h pump rating.
The published filtration capacity is approximately:
16,000 L/h with sand
or
16,800 L/h with Aqualoon.
The actual operating flow depends on the complete hydraulic system, including:
- Pool volume
- Required turnover time
- Pipe diameter
- Pipe length
- Filter resistance
- Suction lift
- Discharge elevation
- Valves
- Elbows
- Skimmers
- Return fittings
The pump should therefore be evaluated at the required total dynamic head (TDH).
Maintenance
For reliable operation:
- Monitor the pressure gauge regularly.
- Backwash the filter when required.
- Perform a rinse cycle after backwashing.
- Keep the pump's pre-filter basket clean.
- Check the filter tank for cracks or damage.
- Inspect all plumbing connections for leaks.
- Check the multiport valve and seals.
- Maintain the correct quantity of filter media.
- Follow recommended swimming-pool chemical levels.
- Do not operate the pump dry.
- Switch off the pump before changing valve positions.
Technical Product Data
Brand: LEO
Model: CONDE 22
Category: Pool Pump Filter / Swimming Pool Sand Filter
Filter Tank Volume: 125 L
Tank Diameter: 558 mm
Tank Height: 940 mm
Pump Power: 1.1 kW / 1.5 HP
Pump Flow Rate: 22,000 L/h
Pump Flow Rate: 22 m³/h
Sand Filtration Flow: 16,000 L/h
Aqualoon Filtration Flow: 16,800 L/h
Sand Capacity: 140 kg
Aqualoon Capacity: 3,800 g
Valve: 7-Way Multiport Valve
Filtration System: 6-Finger / Lateral
Connection: 50 mm hard pipe
Tank Material: HDPE / Polypropylene
Pressure Gauge: Included
Connecting Hose: Included
Base Plate: Included
Pump Type: Horizontal Self-Priming Centrifugal
Pump Pre-Filter: Hair & Lint Basket
Applications: Swimming pools, spas, jacuzzis, water parks and other suitable pool-water filtration applications.
Inquiry - LEO POOL PUMP FILTERS - CONDE 22