B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO GASOLINE ENGINE PUMPS - LGP 20-2H



The LEO LGP20-2H is a 2-inch high-pressure gasoline engine water pump designed for applications requiring significantly higher discharge pressure and head than a conventional high-flow 2-inch pump. It is powered by a 6.5 HP, 196 cc, single-cylinder, 4-stroke, air-cooled gasoline engine and features a double-impeller high-head hydraulic design. LEO specifies a maximum flow of approximately 20 m³/h (333 L/min) and a maximum head of approximately 81 m.

The LGP20-2H is suitable for agricultural irrigation, water transfer, construction sites, industrial water supply, factory drainage, mine applications and municipal water operations, particularly where a relatively high discharge pressure is required.

Product Description

The LEO LGP20-2H Petrol Engine Pump combines a powerful 6.5 HP gasoline engine with a high-pressure, double-impeller centrifugal pump. The two-stage hydraulic arrangement allows the pump to generate substantially greater head than the standard LGP20-A.

This makes the LGP20-2H particularly useful when water needs to be transferred through long pipelines, elevated locations, irrigation systems or applications with higher system resistance.

The pump has a 2-inch / 50 mm suction inlet and a 2-inch / 50 mm main discharge outlet, while the high-pressure outlet arrangement can also accommodate smaller discharge connections depending on the supplied configuration.

Key Specifications

Specification LEO LGP20-2H
Brand LEO
Model LGP20-2H
Product Type Gasoline Engine Water Pump
Pump Type High-Pressure Centrifugal Pump
Hydraulic Design Double Impeller
Engine Type Single-Cylinder, 4-Stroke, Air-Cooled
Engine Displacement 196 cc
Maximum Engine Power 6.5 HP / 4.8 kW
Rated Speed 3,600 rpm
Maximum Flow 20 m³/h / 333 L/min
Maximum Head Approx. 81 m
Maximum Suction Approx. 5–6 m
Inlet 2" / 50 mm
Main Outlet 2" / 50 mm
Additional Outlet Configuration 1 × 2" + 2 × 1.5" on specified configurations
Fuel Tank 2.8 L
Impeller Aluminium
Diffuser HT200
Pump Body Aluminium
Mechanical Seal Carbon / Ceramic
Crankshaft Forged Steel
Frame Steel
Cooling Air-Cooled
Liquid Temperature 0°C–40°C
Approx. Gross Weight 22.24 kg
Package Size 470 × 412 × 432 mm

LEO's current European brochure gives the LGP20-2H a maximum volume of 20 m³/h, maximum height of 81 m, 50 mm inlet and 38 mm discharge arrangement, while detailed LEO pump data and Malaysian listings provide the additional outlet configuration and 196 cc/6.5 HP engine specifications.

6.5 HP 196 cc Engine

The LGP20-2H uses a single-cylinder, 4-stroke, air-cooled gasoline engine with:

  • 196 cc displacement
  • 6.5 HP maximum power
  • Approximately 4.8 kW
  • 3,600 rpm rated speed
  • Low-oil shutdown protection
  • Separate engine lubrication
  • 2.8 L fuel tank

The engine provides sufficient power for the pump's double-impeller high-pressure hydraulic system.

Double-Impeller High-Pressure Design

One of the main features of the LGP20-2H is its double-impeller configuration.

Unlike a conventional single-stage pump, the two impellers work together to increase the pressure generated by the hydraulic system. This allows the LGP20-2H to achieve a maximum head of approximately 81 m, making it particularly suitable for high-head applications.

The high-head design is the primary reason to select the LGP20-2H instead of a standard LGP20-A when the application requires significantly greater discharge pressure.

Maximum Flow – 20 m³/h

The maximum rated flow is approximately:

20 m³/h

Equivalent to:

333 L/min

or approximately:

5.55 L/s.

The maximum flow is achieved at a relatively low head. As the required head increases, the available flow decreases.

Hydraulic Performance

LEO's published performance curve provides the following approximate relationship:

Flow Approx. Head
0 m³/h 81 m
5 m³/h 72.5 m
10 m³/h 60 m
15 m³/h 45 m
20 m³/h 5 m

These values demonstrate the high-head characteristics of the LGP20-2H.

For example, at approximately 10 m³/h, the pump can generate around 60 m head, whereas at the maximum 20 m³/h flow, the available head falls dramatically.

Therefore, the LGP20-2H should be selected based on the required flow/head operating point, rather than simply using its 20 m³/h maximum-flow figure.

Maximum Head – 81 m

The LGP20-2H is rated at approximately:

81 metres maximum head

This is significantly higher than the approximately 32 m maximum head of the standard LGP20-A.

A maximum head of 81 m corresponds to approximately:

8.1 bar of theoretical water head

before accounting for practical system losses and the pump's actual operating point.

The maximum-head figure should not be interpreted as the pressure available while simultaneously delivering 20 m³/h.

2-Inch Suction Inlet

The pump uses a:

2" / 50 mm inlet

A properly sized suction hose is important because suction-side restrictions can significantly reduce performance.

The suction system should be:

  • Airtight
  • As short as practical
  • Properly supported
  • Free from unnecessary bends
  • Equipped with an appropriate strainer/foot valve where required

LEO specifies approximately 5 m suction with a 120-second priming condition in its current European brochure, while other LEO/Malaysian product information lists approximately 6 m maximum suction.

For conservative product specifications, 5–6 m maximum suction is appropriate.

High-Pressure Outlet Configuration

The LGP20-2H is differentiated from ordinary 2-inch pumps by its high-pressure discharge arrangement.

LEO's European brochure specifies:

50 mm inlet

and an outlet arrangement of:

38 mm / 1 × 38 mm + 2 × 25 mm

Other product documentation and Malaysian listings identify the main outlet as 2" / 50 mm, with additional smaller discharge outlets available on the supplied pump configuration.

This outlet arrangement makes the pump versatile for different hose and high-pressure water-transfer requirements.

Aluminium Pump Body

The LGP20-2H uses an aluminium pump body and aluminium bracket.

This provides a useful balance between:

  • Low overall weight
  • Corrosion resistance
  • Mechanical strength
  • Portability

The pump body is supported by a steel frame for stability during operation.

Aluminium Impeller

The LGP20-2H uses an aluminium impeller.

LEO's material table identifies the impeller as aluminium and the diffuser as HT200.

The double-impeller configuration is engineered to generate the high head required for elevated or high-resistance water-transfer systems.

HT200 Diffuser

The diffuser is manufactured from HT200 material according to LEO's published material specification.

The diffuser guides water leaving the impeller and contributes to the conversion of velocity into pressure within the pump's hydraulic system.

Carbon/Ceramic Mechanical Seal

The LGP20-2H uses a carbon/ceramic mechanical seal.

This seal helps prevent water leakage along the rotating shaft and separates the hydraulic section from the engine-drive components.

Proper priming and avoiding dry running are important for extending mechanical-seal service life.

Forged Steel Crankshaft

LEO/Malaysian product specifications identify a high-quality forged steel crankshaft in the LGP20-2H engine assembly.

The forged-steel construction is intended to provide durability under the mechanical loads generated by the 6.5 HP engine.

Low-Oil Shutdown Protection

The engine is equipped with a low-engine-oil shutdown system.

This safety feature automatically stops or prevents continued engine operation when the oil level falls below the protection threshold, helping reduce the risk of engine damage from insufficient lubrication.

Fuel Tank

The LGP20-2H has a:

2.8 L fuel tank.

Because it is a 4-stroke gasoline engine, the engine oil is stored separately and should not be mixed with the fuel unless specifically required by the engine manufacturer.

Portable Steel Frame

The complete pump assembly is mounted on a steel frame.

The frame provides:

  • Stable support during operation
  • Protection for the pump and engine
  • Easier transportation
  • Convenient positioning at temporary pumping locations

The published package dimensions are approximately:

470 × 412 × 432 mm

with a gross package weight of approximately 22.24 kg.

Applications

The LEO LGP20-2H is suitable for:

  • Agricultural irrigation
  • Field irrigation
  • Garden irrigation
  • High-pressure water transfer
  • Long-distance water transfer
  • Elevated water transfer
  • Farm water supply
  • Construction-site water supply
  • Factory water supply
  • Factory drainage
  • Mine water applications
  • Municipal water operations
  • Tank filling
  • General clean-water transfer

LEO specifically identifies applications involving factories, mines, municipal facilities and field irrigation.

Suitable Liquid

The LGP20-2H is primarily designed for:

Clean water or liquids with similar physical and chemical properties.

Recommended liquid temperature:

0°C–40°C.

It should not be used as a substitute for a dedicated sewage, sludge, slurry or solids-handling pump.

Main Advantages

  • 6.5 HP gasoline engine
  • 196 cc displacement
  • 4-stroke air-cooled engine
  • Double-impeller high-pressure design
  • Maximum head approximately 81 m
  • Maximum flow approximately 20 m³/h
  • Maximum flow approximately 333 L/min
  • 2-inch / 50 mm inlet
  • 2-inch main discharge configuration
  • Additional smaller outlet options
  • 2.8 L fuel tank
  • Low-oil shutdown protection
  • Aluminium pump body
  • Aluminium impeller
  • HT200 diffuser
  • Carbon/ceramic mechanical seal
  • Forged-steel crankshaft
  • Steel portable frame
  • Compact construction
  • Suitable for high-pressure irrigation and water transfer

LGP20-2H vs LGP20-A

Feature LGP20-2H LGP20-A
Engine Power 6.5 HP 5.5 HP
Engine Displacement 196 cc 163 cc
Engine 4-Stroke 4-Stroke
Impeller Design Double Impeller Single-stage
Maximum Flow 20 m³/h 30 m³/h
Maximum Head 81 m 32 m
Maximum Suction 5–6 m 8 m
Main Inlet 2" / 50 mm 2" / 50 mm
Fuel Tank 2.8 L Approx. 2.8 L
Best For High-pressure/high-head transfer Higher-volume/medium-head transfer

The key difference is the hydraulic duty. The LGP20-2H sacrifices maximum flow capacity in exchange for a much higher available head, making it the better choice where elevation or pipeline resistance is significant.

Important Performance Consideration

The LGP20-2H should be selected according to the required flow rate at the required total head.

For example:

  • At approximately 5 m³/h, the published curve indicates about 72.5 m head.
  • At approximately 10 m³/h, approximately 60 m head.
  • At approximately 15 m³/h, approximately 45 m head.
  • At approximately 20 m³/h, approximately 5 m head.

This means the pump is primarily a high-head pump, rather than simply a 333 L/min pump.

The actual operating point depends on:

  • Static elevation
  • Suction lift
  • Pipe length
  • Pipe diameter
  • Pipe friction
  • Number of bends
  • Valves
  • Filters
  • Hose restrictions
  • Discharge elevation

For accurate selection, the complete system's total dynamic head should be calculated and matched against the pump curve.

Installation Recommendations

For reliable performance:

  1. Position the pump as close to the water source as practical.
  2. Use a suitable 2-inch suction hose.
  3. Keep the suction line short and straight.
  4. Ensure all suction connections are completely airtight.
  5. Use an appropriate foot valve/strainer.
  6. Prime the pump before starting.
  7. Use suitable discharge piping for the required pressure.
  8. Avoid unnecessary restrictions on the suction side.
  9. Do not operate the pump dry.
  10. Place the pump on a stable, level surface.
  11. Allow adequate ventilation around the gasoline engine.
  12. Keep the pump away from enclosed areas where exhaust gases can accumulate.

Maintenance

Regular maintenance should include:

  • Check engine oil before operation.
  • Maintain the correct fuel level.
  • Clean or replace the air filter as required.
  • Inspect the spark plug.
  • Keep engine cooling passages clean.
  • Check the suction strainer.
  • Inspect the impellers and diffuser periodically.
  • Check the mechanical seal for leakage.
  • Inspect fuel lines and connections.
  • Change engine oil according to the engine manufacturer's schedule.
  • Check frame bolts and mounting hardware.
  • Drain or stabilize fuel during extended storage as recommended.
  • Never perform maintenance while the engine is running.

Technical Product Data

Brand: LEO
Model: LGP20-2H
Category: Gasoline Engine Pump / Petrol Water Pump
Pump Type: High-Pressure Centrifugal Pump
Hydraulic Design: Double Impeller
Engine: Single-cylinder, 4-stroke, air-cooled
Engine Displacement: 196 cc
Maximum Power: 6.5 HP / 4.8 kW
Rated Speed: 3,600 rpm
Maximum Flow: 20 m³/h / 333 L/min
Maximum Head: Approx. 81 m
Maximum Suction: Approx. 5–6 m
Inlet: 2" / 50 mm
Main Outlet: 2" / 50 mm
Additional Outlet: 1 × 38 mm + 2 × 25 mm on specified configuration
Fuel Tank: 2.8 L
Impeller: Aluminium
Diffuser: HT200
Pump Body: Aluminium
Mechanical Seal: Carbon / Ceramic
Crankshaft: Forged Steel
Frame: Steel
Cooling: Air-Cooled
Liquid: Clean Water / Similar Liquids
Liquid Temperature: 0°C–40°C
Approx. Gross Weight: 22.24 kg
Package Dimensions: 470 × 412 × 432 mm.



 Inquiry - LEO GASOLINE ENGINE PUMPS - LGP 20-2H