B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO GASOLINE ENGINE PUMPS - LGP 30-2B



The LEO LGP30-2B is a high-volume 3-inch gasoline engine water pump designed for clean-water transfer, agricultural irrigation, drainage and general water-supply applications where electrical power is unavailable or impractical. It is powered by a 5 HP, 163 cc, single-cylinder, 4-stroke, air-cooled Briggs & Stratton XR750 gasoline engine and uses 3-inch (80 mm) inlet and outlet connections. The pump provides a maximum flow of approximately 60 m³/h (1,000 L/min) and maximum head of approximately 33 m according to the published LEO performance data.

The LGP30-2B is particularly suited to field irrigation, construction-site water transfer, factory drainage, mine drainage, municipal water applications and other high-volume clean-water pumping duties. Its strengthened pump body, anti-rust cast-iron hydraulic components, special mechanical seal and low-fuel-consumption engine make it suitable for regular portable pumping operations.

Product Description

The LEO LGP30-2B Gasoline Engine Pump combines a 5 HP 4-stroke petrol engine with a high-capacity centrifugal pump. Unlike an electrically driven pump, it can operate independently from the electrical grid, making it suitable for remote farms, construction sites, temporary drainage points and other locations without convenient mains electricity.

The 3-inch hydraulic configuration is designed for high water volume, with a published maximum capacity of approximately 60 m³/h or 1,000 L/min. The pump is intended for clean water or liquids with similar physical and chemical properties, with a recommended liquid temperature range of 0°C to 40°C.

Key Specifications

Specification LEO LGP30-2B
Brand LEO
Model LGP30-2B
Product Type Gasoline Engine Water Pump
Pump Type Centrifugal
Engine Brand Briggs & Stratton
Engine Model XR750 / CR750
Engine Type Single-Cylinder, 4-Stroke, Air-Cooled
Engine Displacement 163 cc
Maximum Power 5 HP
Approx. Power 3.75 kW
Rated Speed 3,600 rpm
Inlet 3" / 80 mm
Outlet 3" / 80 mm
Maximum Flow 60 m³/h / 1,000 L/min
Maximum Head Approx. 33 m
Maximum Suction 5 m
Fuel Tank 3.1 L
Engine Oil Capacity 0.6 L
Ignition Electronic/CDI-type system
Pump Body Reinforced aluminium
Impeller Anti-rust cast iron
Diffuser Anti-rust cast iron
Mechanical Seal Special / carbon-ceramic type
Frame Steel
Cooling Forced air-cooled
Liquid Temperature 0°C–40°C
Approx. Net Weight 26–27.2 kg
Package Dimensions Approx. 545 × 435 × 435 mm

Published LEO catalogue data identifies the LGP30-2B with a 5 HP, 163 cc XR750 engine, 3.1 L fuel tank, 0.6 L engine-oil capacity, 3-inch inlet/outlet and 60 m³/h maximum flow. Malaysian listings identify the Briggs & Stratton engine as CR750, while the LEO technical documentation identifies the engine as XR750.

Briggs & Stratton 5 HP Engine

The LGP30-2B is equipped with a Briggs & Stratton 5 HP gasoline engine.

The engine specifications include:

  • 163 cc displacement
  • 5 HP output
  • Single-cylinder configuration
  • 4-stroke operation
  • Air-cooled design
  • Approximately 3,600 rpm
  • Separate engine-oil lubrication
  • Approximately 3.1 L fuel tank
  • Approximately 0.6 L engine-oil capacity

The 4-stroke configuration means gasoline and engine oil are not premixed as they are on a conventional 2-stroke engine.

3-Inch / 80 mm Connections

The LGP30-2B features:

3" × 3" / 80 mm × 80 mm inlet and outlet

The larger connection size allows substantially higher water volume compared with 1-inch and 2-inch gasoline engine pumps.

For high-flow applications, the suction hose should be properly sized and airtight. Excessive suction-side restriction can significantly reduce pump performance and may cause priming difficulties or cavitation.

Maximum Flow

The maximum rated flow is approximately:

60 m³/h

Equivalent to:

1,000 L/min

or approximately:

16.7 L/s.

This is the pump's maximum-flow region under low-head conditions. It should not be interpreted as the flow available when the pump is operating near its maximum head.

Pump Performance

The published LEO performance data provides the following approximate flow/head relationship:

Flow Approx. Head
0 m³/h 33 m
5 m³/h 32 m
10 m³/h 30 m
15 m³/h 28.4 m
20 m³/h 27 m
25 m³/h 25 m
30 m³/h 22 m
35 m³/h 19.3 m
40 m³/h 17 m
45 m³/h 15.5 m
50 m³/h 12 m
55 m³/h 8.6 m
60 m³/h 5 m

The values above are based on the LGP30-2B performance curve published in LEO technical documentation.

This makes the LGP30-2B appropriate for applications where a large quantity of water must be moved over relatively moderate head.

Maximum Head

The LGP30-2B is rated at approximately:

33 m maximum head

Some commercial listings state 30–32 m, while the detailed LEO performance table gives approximately 33 m at zero flow. The difference is attributable to different catalogue generations and reporting conventions.

For product listing purposes, 33 m maximum head is the more detailed performance-curve value.

Maximum Suction

The LGP30-2B is specified with approximately:

5 m maximum suction lift

LEO documentation indicates that establishing suction at approximately 5 m can require around 120 seconds, depending on operating conditions.

Actual suction performance is affected by:

  • Suction lift
  • Suction-hose length
  • Suction-hose diameter
  • Foot valve
  • Air leakage
  • Water temperature
  • Atmospheric pressure
  • Pump priming
  • Number of bends and fittings

For reliable operation, the suction line should be airtight and appropriately sized.

Strengthened Pump Body

The LGP30-2B features a strengthened pump body designed to provide improved durability and reliability during repeated water-transfer operations.

The pump construction combines a relatively lightweight aluminium housing with durable cast-iron hydraulic components.

Anti-Rust Impeller and Diffuser

The hydraulic section uses:

  • Anti-rust cast-iron impeller
  • Anti-rust cast-iron diffuser

These components are designed to withstand normal clean-water pumping conditions and provide durable hydraulic performance.

The LGP30-2B is not designed as a sewage or heavy-solids pump. Water containing significant quantities of sand, gravel, sludge or abrasive particles can accelerate wear.

Mechanical Seal

A special mechanical seal is used to improve sealing between the hydraulic and engine-drive sections.

LEO identifies the mechanical seal as one of the key features of the LGP30-2B, helping minimize water leakage around the rotating shaft.

5-Direction Outlet

The LGP30-2B incorporates a 5-direction outlet arrangement, allowing the discharge direction to be adapted to the installation.

This is useful for portable applications where the pump may be repositioned or where the discharge hose needs to be routed in different directions.

Improved Starter Handle

The pump incorporates an improved starter handle designed to make manual engine starting easier.

This is particularly useful for portable field equipment that may be repeatedly started and stopped during irrigation, drainage or water-transfer operations.

Compact Design

Despite its high flow capacity, the LGP30-2B uses a compact pump-and-engine configuration.

Published dimensions are approximately:

545 × 435 × 435 mm

with catalogue weight figures around 27.2 kg gross for the LGP30-2B configuration. A Malaysian product listing gives approximately 26.2 kg net weight.

The compact design makes it practical for transport between temporary pumping locations.

Fuel Tank

The LGP30-2B is specified with a:

3.1 L fuel tank

The catalogue also identifies approximately 0.6 L engine-oil capacity.

Because the pump uses a 4-stroke engine, the engine oil is maintained separately from the gasoline.

Applications

The LEO LGP30-2B is suitable for:

  • Agricultural irrigation
  • Farm irrigation
  • Field irrigation
  • Garden watering
  • Water transfer from ponds
  • Water transfer from tanks
  • Reservoir transfer
  • Construction-site water transfer
  • Factory water supply
  • Factory drainage
  • Mine water transfer
  • Municipal water applications
  • Temporary drainage
  • General clean-water pumping

LEO's published application information specifically identifies water supply and drainage for factories, mines and municipal facilities, as well as field irrigation.

Suitable Liquid

The LGP30-2B is intended for:

Clean water or liquids with similar physical and chemical properties.

Specified liquid temperature:

0°C–40°C.

It should not be used as a replacement for a dedicated sewage, slurry or solids-handling pump.

Main Advantages

  • 3-inch high-flow gasoline water pump
  • 5 HP Briggs & Stratton engine
  • 163 cc 4-stroke engine
  • Air-cooled operation
  • 3" / 80 mm inlet and outlet
  • Maximum flow approximately 60 m³/h
  • Maximum flow approximately 1,000 L/min
  • Maximum head approximately 33 m
  • Maximum suction approximately 5 m
  • 3.1 L fuel tank
  • 0.6 L engine-oil capacity
  • Reinforced pump body
  • Anti-rust cast-iron impeller
  • Anti-rust cast-iron diffuser
  • Special mechanical seal
  • 5-direction outlet
  • Improved starter handle
  • Compact portable design
  • Low gasoline consumption
  • Suitable for agricultural irrigation
  • Suitable for industrial and construction water transfer

LGP30-2B vs LGP30-A

Feature LGP30-2B LGP30-A
Engine Briggs & Stratton LEO/other configuration
Engine Type 4-Stroke 4-Stroke
Displacement 163 cc 196 cc
Power 5 HP 6.5 HP
Inlet / Outlet 3" / 80 mm 3" / 75 mm
Maximum Flow 60 m³/h 60 m³/h
Maximum Head Approx. 33 m Approx. 32 m
Maximum Suction 5 m 5 m
Fuel Tank 3.1 L Approx. 3.1 L*
Primary Advantage Briggs & Stratton engine + high flow Higher engine power

*Fuel-tank specifications can vary by LGP30-A engine configuration.

The key distinction is that the LGP30-2B uses the 163 cc, 5 HP Briggs & Stratton XR750/CR750 engine, while the LGP30-A configuration is associated with the larger 196 cc, 6.5 HP engine.

Important Pump Selection Consideration

The 60 m³/h maximum flow should not be used as the expected flow for every installation.

For example, according to the LGP30-2B performance curve:

  • 20 m³/h → approximately 27 m head
  • 30 m³/h → approximately 22 m head
  • 40 m³/h → approximately 17 m head
  • 50 m³/h → approximately 12 m head
  • 60 m³/h → approximately 5 m head.

The actual operating point depends on the total dynamic head of the complete installation.

Factors affecting delivered flow include:

  • Static elevation
  • Suction lift
  • Pipe length
  • Pipe diameter
  • Pipe friction
  • Elbows
  • Valves
  • Filters
  • Foot valves
  • Hose restrictions
  • Discharge elevation

For accurate pump selection, the required flow should be matched to the pump curve at the actual system head.

Installation Recommendations

For optimum operation:

  1. Place the pump as close to the water source as practical.
  2. Use a suitable 3-inch suction hose/pipe.
  3. Keep the suction line short and minimize bends.
  4. Ensure all suction connections are airtight.
  5. Install a suitable foot valve/strainer where required.
  6. Prime the pump before starting.
  7. Use appropriately sized discharge piping.
  8. Avoid excessive suction-side restrictions.
  9. Do not operate the pump dry.
  10. Position the pump on a stable, level surface.

Maintenance

Regular maintenance should include:

  • Check engine oil before every operation.
  • Use clean, appropriate gasoline.
  • Keep the air filter clean.
  • Inspect the spark plug periodically.
  • Keep engine cooling passages clear.
  • Clean the suction strainer.
  • Inspect the impeller and diffuser.
  • Check the mechanical seal for leakage.
  • Inspect fuel lines and connections.
  • Change engine oil according to the engine manufacturer's schedule.
  • Check the pump frame and mounting hardware.
  • Drain or stabilize fuel for long-term storage according to the engine manufacturer's instructions.
  • Never perform pump maintenance while the engine is running.

Technical Product Data

Brand: LEO
Model: LGP30-2B
Category: Gasoline Engine Pump / Petrol Water Pump
Pump Type: Centrifugal
Engine Brand: Briggs & Stratton
Engine Model: XR750 / CR750
Engine Type: Single-cylinder, 4-stroke, air-cooled
Displacement: 163 cc
Power: 5 HP
Rated Speed: 3,600 rpm
Maximum Flow: 60 m³/h / 1,000 L/min
Maximum Head: Approx. 33 m
Maximum Suction: Approx. 5 m
Inlet: 3" / 80 mm
Outlet: 3" / 80 mm
Fuel Tank: 3.1 L
Engine Oil Capacity: 0.6 L
Impeller: Anti-rust cast iron
Diffuser: Anti-rust cast iron
Pump Body: Reinforced aluminium
Mechanical Seal: Special mechanical seal
Frame: Steel
Cooling: Air-cooled
Liquid: Clean water / similar liquids
Liquid Temperature: 0°C–40°C
Approx. Net Weight: 26.2 kg
Approx. Package Dimensions: 545 × 435 × 435 mm



 Inquiry - LEO GASOLINE ENGINE PUMPS - LGP 30-2B