Product Overview
The SATA 46622 4-in-1 2-Head Quick Pull Wrench is a professional multi-size ratcheting wrench designed to provide four metric wrench sizes in one compact tool: 9mm, 11mm, 14mm and 15mm. It is part of SATA's 4-in-1 Double Box Ratcheting Wrench range, which includes models 46621 through 46624.
The 46622 features a 72-tooth ratcheting mechanism with approximately a 5° recovery angle, allowing efficient tightening and loosening in confined areas where a conventional wrench has limited room to swing.
Constructed from Chrome Vanadium (Cr-V) alloy steel and finished with a full polish, the wrench is intended for professional automotive repair, machinery maintenance, workshop servicing and general mechanical applications.
Key Features
• Brand: SATA
• Model: 46622
• Product Type: 4-in-1 Double Box Ratcheting Wrench
• Sizes: 9mm × 11mm × 14mm × 15mm
• Four metric sizes in one wrench
• Two-head / double-box configuration
• 72-tooth ratcheting mechanism
• Approximately 5° operating/recovery angle
• Quick-pull ratcheting action
• Reversible mechanism for tightening and loosening
• Chrome Vanadium alloy-steel construction
• Full-polish finish
• Compact design for restricted working areas
• Suitable for automotive and mechanical applications
4-in-1 Size Configuration
The SATA 46622 combines four frequently used metric sizes into one wrench:
| Head | Wrench Size |
|---|---|
| Head 1 | 9mm |
| Head 1 | 11mm |
| Head 2 | 14mm |
| Head 2 | 15mm |
| Total | 4 Sizes |
The two heads each provide two different box-end sizes, allowing one wrench to replace four individual ratcheting wrenches.
72-Tooth Ratcheting Mechanism
The 46622 incorporates a 72-tooth ratchet system.
With approximately a 5° operating angle, the wrench can be repositioned with a relatively small movement. This is particularly useful where surrounding components prevent the large swing required by a conventional wrench.
The fine ratcheting mechanism is useful for:
• Engine compartments
• Machinery assemblies
• Brackets and mounting points
• Tight automotive spaces
• Equipment housings
• Closely spaced fasteners
Double-Box Head Design
Unlike a standard combination wrench with one open end and one ring end, the SATA 46622 uses a double-box configuration.
Each head contains two metric ring sizes, giving four sizes in total.
The enclosed box-end profile surrounds the fastener and provides broad contact around compatible nuts and bolts. This design is particularly useful when secure engagement is preferred over the quick side access of an open-end wrench.
5° Ratcheting Angle
The approximately 5° recovery angle allows the user to work effectively in restricted spaces.
After applying torque, the wrench only needs a small return movement before the ratchet engages again. This reduces the amount of clearance required around the fastener and can make repetitive fastening work considerably faster.
The 72-tooth mechanism and 5° operating specification are listed by available product specifications for model 46622.
Quick-Pull Ratcheting Operation
The ratcheting mechanism allows the user to loosen or tighten a fastener without completely removing the wrench after every stroke.
The basic operating sequence is:
- Select the correct 9mm, 11mm, 14mm or 15mm ring.
- Position the wrench fully over the fastener.
- Apply torque in the required direction.
- Return the wrench through the small ratcheting angle.
- Continue the process until the fastener is sufficiently loosened or tightened.
This makes the 46622 more efficient than a conventional fixed double-ended wrench for repetitive fastening operations.
Reversible Ratcheting Mechanism
The wrench incorporates a reversing mechanism, allowing the operating direction to be changed between loosening and tightening.
This allows the same wrench to be used for:
Loosening: Counterclockwise operation.
Tightening: Clockwise operation.
The reversing gear is specified as a zinc-alloy component in available product information.
Chrome Vanadium Construction
The SATA 46622 is manufactured from Chrome Vanadium (Cr-V) alloy steel.
Cr-V alloy steel is commonly used for professional hand tools because of its combination of:
• Strength
• Toughness
• Wear resistance
• Durability
• Resistance to deformation under normal hand-tool applications
This construction makes the 46622 suitable for repeated workshop and maintenance work.
Full-Polish Finish
The wrench features a full-polish finish.
The polished surface provides practical benefits including:
• Easier cleaning
• Improved resistance to surface corrosion
• Easier removal of grease and oil
• Smooth handling
• Professional appearance
The full-polish finish is specified for the SATA 46622 range.
Compact Multi-Size Design
A major advantage of the SATA 46622 is that one wrench provides four working sizes.
Instead of carrying separate:
• 9mm ratcheting wrench
• 11mm ratcheting wrench
• 14mm ratcheting wrench
• 15mm ratcheting wrench
the technician can carry a single 46622.
This helps reduce tool-box space and makes the wrench useful for mobile technicians and field-service applications.
Dimensions
SATA's catalogue specifies the following dimensions for model 46622:
| Specification | Details |
|---|---|
| Model | 46622 |
| Size | 9 × 11 × 14 × 15mm |
| Overall Length | 180mm |
| D1 | 23.7mm |
| D2 | 30.7mm |
| Head Dimension | 36mm |
The official catalogue data identifies the 46622 as 180mm long with D1 of 23.7mm and D2 of 30.7mm.
A retail specification gives an approximate physical size of 180 × 30 × 17mm, which may vary according to the measurement method used.
Specifications
| Specification | Details |
|---|---|
| Brand | SATA |
| Model | 46622 |
| Product Type | 4-in-1 Double Box Ratcheting Wrench |
| Quantity | 1 Piece |
| Sizes | 9 × 11 × 14 × 15mm |
| Number of Sizes | 4 |
| Ratchet Mechanism | 72 Teeth |
| Ratcheting Angle | 5° |
| Material | Chrome Vanadium (Cr-V) |
| Reversing Gear | Zinc Alloy |
| Finish | Full Polish |
| Overall Length | 180mm |
| D1 | 23.7mm |
| D2 | 30.7mm |
| Head Configuration | 2 Heads / 4 Sizes |
| Wrench Type | Double Box Ratcheting |
Applications
The SATA 46622 is suitable for:
• Automotive repair
• Car servicing
• Motorcycle maintenance
• Engine servicing
• Machinery maintenance
• Industrial equipment servicing
• Mechanical assembly
• Factory maintenance
• Workshop repair
• Field service
• General mechanical maintenance
The 9mm, 11mm, 14mm and 15mm sizes make this model particularly useful for applications where these metric fastener sizes are commonly encountered.
Automotive Applications
The 46622 can be used for a variety of automotive maintenance tasks, including:
• Engine compartment work
• Brackets and mounting hardware
• Chassis components
• Engine accessories
• Vehicle body hardware
• Suspension-related maintenance
• General service and repair work
Its compact ratcheting head is particularly useful when fasteners are positioned close to surrounding components.
Mechanical & Industrial Applications
The wrench can also be used for:
• Machinery assembly
• Equipment maintenance
• Production-line servicing
• Factory maintenance
• Agricultural machinery
• Construction equipment
• Mechanical installations
• General engineering work
The 4-in-1 design is particularly useful for technicians who regularly work with several different metric fastener sizes.
Advantages of SATA 46622
• Four wrench sizes in one tool
• Covers 9mm, 11mm, 14mm and 15mm
• Reduces tool-box space
• 72-tooth fine ratcheting mechanism
• Approximately 5° operating angle
• Effective in confined spaces
• Double-box configuration
• Quick ratcheting operation
• Reversible tightening/loosening function
• Chrome Vanadium construction
• Full-polish finish
• Compact 180mm length
• Suitable for professional mechanical applications
SATA 46621 vs SATA 46622
| Feature | 46621 | 46622 |
|---|---|---|
| Sizes | 8 × 10 × 12 × 13mm | 9 × 11 × 14 × 15mm |
| Number of Sizes | 4 | 4 |
| Ratchet | 72 Tooth | 72 Tooth |
| Operating Angle | Approx. 5° | Approx. 5° |
| Material | Cr-V | Cr-V |
| Overall Length | 160mm | 180mm |
| Configuration | 2 Heads | 2 Heads |
The 46622 provides the next size group after the 46621, covering 9mm, 11mm, 14mm and 15mm fasteners. SATA's catalogue lists the 46621 at 160mm and the 46622 at 180mm.
SATA 4-in-1 Range
| Model | Sizes | Overall Length |
|---|---|---|
| 46621 | 8 × 10 × 12 × 13mm | 160mm |
| 46622 | 9 × 11 × 14 × 15mm | 180mm |
| 46623 | 16 × 17 × 18 × 19mm | 230mm |
| 46624 | 20 × 21 × 22 × 24mm | 291mm |
This range allows users to select the appropriate 4-in-1 wrench according to the metric fastener sizes used in their applications.
Recommended Usage
Always select the correct ring size for the fastener and ensure the wrench is fully seated before applying torque.
Use the ratcheting mechanism for normal tightening and loosening operations within the appropriate application limits.
For particularly high-torque fasteners, use the correct fixed or torque-controlled tool specified for the application rather than exceeding the wrench's intended operating conditions.
Safety & Usage Notes
• Always use the correct wrench size.
• Ensure complete engagement with the fastener.
• Do not use the wrench as a hammer or pry bar.
• Do not modify, grind, weld or heat the wrench.
• Do not use damaged or excessively worn tools.
• Do not use impact tools on a hand ratcheting wrench.
• Inspect the ratcheting mechanism before use.
• Wear appropriate eye protection and PPE during mechanical work.
Product Description
SATA 46622 4-IN-1 2-Head Quick Pull Wrench 9×11×14×15mm is a professional multi-size double-box ratcheting wrench combining four metric sizes in one compact tool. Featuring 9mm, 11mm, 14mm and 15mm working sizes, the wrench uses a 72-tooth ratcheting mechanism with approximately a 5° operating angle, making it suitable for fastener work in tight and restricted spaces. Constructed from durable Chrome Vanadium alloy steel and finished with a full polish, the SATA 46622 provides strength, durability and easy cleaning. Its two-head, four-size design reduces the number of individual wrenches required, while the reversible ratcheting mechanism allows efficient tightening and loosening without repeatedly removing the wrench from the fastener. With an 180mm overall length, the SATA 46622 is suitable for automotive repair, machinery maintenance, industrial servicing, mechanical assembly and general workshop applications.
SEO Product Description
SATA 46622 4-in-1 Ratchet Wrench 9×11×14×15mm is a professional Chrome Vanadium double-box ratcheting wrench combining four metric sizes in one compact hand tool. Equipped with 9mm, 11mm, 14mm and 15mm ring sizes, the SATA 46622 features a 72-tooth ratchet mechanism and approximately 5° working angle, allowing efficient operation in tight and hard-to-reach areas. The Cr-V alloy-steel construction provides durability for automotive repair, machinery maintenance and workshop applications, while the full-polish finish makes the wrench easy to clean and helps resist surface corrosion. Its 4-in-1 design reduces tool-box space and allows technicians to carry four commonly used wrench sizes in a single 180mm tool.
Inquiry - SATA 4-IN-1 2-HEAD QUICK PULL WRENCH 9X11X14X15MM - 46622