B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


SATA AIR HOSE REEL Φ6.5MM X 15M - 98004



The SATA 98004 Air Hose Reel is a professional compressed-air hose management solution equipped with a Φ6.5mm × 15m polyether TPU air hose. It is designed for automotive workshops, pneumatic tool stations, maintenance areas, factories and general industrial applications where a controlled and organized air supply is required. The hose uses imported polyether TPU material with hydrolysis resistance, while the shaft, sleeve and hose joint are made from high-quality brass for durability.

Key Features

  • 15m retractable air hose provides extended working reach.
  • Φ6.5mm × 10mm hose specification — 6.5mm inner diameter and 10mm outer diameter.
  • Air hose manufactured from imported polyether TPU.
  • TPU material is resistant to hydrolysis, helping improve service durability.
  • High-quality brass shaft, sleeve and hose joint.
  • PM20 inlet plug.
  • 1/4" Rc outlet coupler.
  • Suitable for pneumatic tools and compressed-air equipment.
  • Helps keep air hoses organized and reduces loose hose around the workplace.
  • Suitable for workshop, automotive and industrial environments.
  • Compact reel configuration saves workspace.
  • Designed for repeated air-tool operation.
  • The hose is a wear-and-tear component and is excluded from SATA's Lifetime Warranty.

Technical Specifications

Specification Details
Brand SATA
Model 98004
Product Type Air Hose Reel
Hose Type Pneumatic Air Hose
Hose Size Φ6.5 × 10mm
Hose Length 15m
Hose Material Polyether TPU
Hose Property Hydrolysis Resistant
Shaft Material High-Quality Brass
Sleeve Material High-Quality Brass
Hose Joint Material High-Quality Brass
Inlet Plug PM20
Outlet Coupler Rc 1/4"
Operating Air Pressure 145 psi / 10 kgf/cm²
Maximum Air Pressure 175 psi / 10 kgf/cm²
Net Weight Approx. 4.3 kg
Warranty 12 Months Equipment Warranty*

SATA's catalog identifies the 98004 with a 15m Ø6.5 × 10mm hose, PM20 inlet, 1/4" outlet and approximately 4.7kg catalog weight; some current retail listings report approximately 4.3kg, so packaged/retail weight may vary.

*The hose itself is a wear-and-tear component and is not covered under SATA's Lifetime Warranty.

15-Metre Air Hose

The 98004 is equipped with a 15-metre output hose, providing substantial reach around a vehicle, machine or workshop workstation.

The extended hose length is useful when the compressed-air source is positioned away from the immediate work area. It allows operators to move around equipment without repeatedly disconnecting and reconnecting the air supply.

Typical applications include:

  • Automotive servicing
  • Pneumatic tool operation
  • Machinery maintenance
  • Workshop cleaning
  • Assembly work
  • Production areas
  • General equipment servicing

Φ6.5 × 10mm Hose Construction

The hose specification is Φ6.5 × 10mm, referring to the approximately 6.5mm internal diameter and 10mm external diameter.

This hose size provides a practical balance between flexibility, air-flow capacity and manageable hose dimensions for general pneumatic applications.

The 6.5mm internal diameter is suitable for many commonly used workshop pneumatic tools, subject to the tool's actual air-consumption requirements.

Polyether TPU Air Hose

SATA specifies an imported polyether TPU material for the air hose. The material is described as resistant to hydrolysis.

This construction is intended to provide a durable and flexible hose for repeated workshop use.

The TPU hose is suitable for environments where the hose may be repeatedly:

  • Extended
  • Retracted
  • Bent
  • Moved around equipment
  • Connected and disconnected
  • Stored on the reel

Hydrolysis Resistance

The specified hydrolysis resistance of the polyether TPU hose is an important material characteristic for long-term service.

Hydrolysis resistance helps the hose maintain its material properties in environments where moisture and humidity may be present.

This makes the hose suitable for typical workshop and industrial environments where compressed air systems may be exposed to ambient moisture.

Brass Shaft, Sleeve and Hose Joint

The shaft, sleeve and hose joint are manufactured from high-quality brass.

Brass is used for these components because of its corrosion resistance and suitability for pneumatic connection components.

The brass construction contributes to durability at areas that experience repeated movement and connection during hose operation.

PM20 Inlet Plug

The 98004 uses a PM20 inlet plug for the air inlet connection. SATA's catalog specifies the PM20 inlet configuration.

The inlet connection should be matched with the appropriate workshop compressed-air piping or coupling system.

1/4" Outlet Coupler

The hose outlet is specified with a 1/4" Rc outlet coupler.

The 1/4" outlet is commonly used for pneumatic tools and accessories in workshop compressed-air systems.

Always verify the thread and coupling standard of the connected pneumatic equipment before installation.

Operating and Maximum Pressure

The 98004 is listed with:

  • Operating pressure: 145 psi / 10 kgf/cm²
  • Maximum pressure: 175 psi / 10 kgf/cm²

The pneumatic system should be operated within the manufacturer's specified pressure limits.

The maximum pressure rating should not be interpreted as the recommended continuous operating pressure.

Workshop Organization

An air hose reel helps maintain a more organized workstation by keeping the hose managed when it is not being used.

It can help reduce:

  • Loose hose lying across the workshop floor
  • Hose tangling
  • Unnecessary hose exposure
  • Trip hazards caused by poorly managed air lines
  • Storage space requirements

The reel is therefore useful for professional workshops where pneumatic tools are used frequently.

Automotive Workshop Applications

The SATA 98004 is particularly suitable for automotive service environments.

Potential applications include:

  • Pneumatic impact wrench stations
  • Air ratchets
  • Air blow guns
  • Pneumatic grinders
  • Pneumatic sanders
  • Tyre service equipment
  • Vehicle maintenance
  • General workshop air supply

The 15m hose provides flexibility when servicing vehicles that require movement around the work area.

Pneumatic Tool Applications

The reel can supply compressed air to compatible pneumatic tools, including:

  • Impact wrenches
  • Air ratchets
  • Air drills
  • Air grinders
  • Air sanders
  • Blow guns
  • Pneumatic screwdrivers
  • Other compatible air-powered tools

The actual suitability depends on the pneumatic tool's required air pressure, air consumption and connection specification.

Industrial Applications

The SATA 98004 can be installed in suitable industrial environments such as:

  • Manufacturing workshops
  • Maintenance departments
  • Production lines
  • Machinery servicing areas
  • Equipment assembly stations
  • Automotive service facilities
  • General engineering workshops

A dedicated hose reel can provide a more consistent and organized pneumatic connection point for frequently used equipment.

Maintenance Applications

The reel is useful where pneumatic equipment must be moved between different service positions.

Examples include:

  • Machinery inspection
  • Equipment repair
  • Component servicing
  • Production maintenance
  • Workshop assembly
  • General mechanical maintenance

The 15m hose provides flexibility while the reel keeps unused hose contained.

Advantages of the 98004

15m working length: Provides a long working range around vehicles and machinery.

Polyether TPU hose: Provides a flexible pneumatic hose with hydrolysis resistance.

Brass components: High-quality brass is used for the shaft, sleeve and hose joint.

145psi operating pressure: Suitable for many general workshop pneumatic applications.

175psi maximum pressure: Provides additional pressure capacity within the specified rating.

1/4" outlet: Compatible with many common pneumatic tool connection systems.

PM20 inlet: Provides the specified compressed-air inlet connection.

Compact hose management: Helps keep the workshop cleaner and more organized.

Professional construction: Designed for automotive, workshop and industrial environments.

Recommended Applications

The SATA 98004 Air Hose Reel is suitable for:

  • Automotive workshops
  • Car repair centres
  • Tyre workshops
  • Mechanical workshops
  • Pneumatic tool stations
  • Industrial maintenance
  • Machinery servicing
  • Manufacturing facilities
  • Equipment assembly
  • General engineering workshops
  • Service centres
  • Workshop air-line systems

Important Usage Notes

The hose reel should be connected to a compatible compressed-air system and operated within the specified pressure limits.

Before use:

  1. Inspect the hose for cuts, cracks, abrasion or other visible damage.
  2. Check the inlet and outlet connections for secure attachment.
  3. Confirm that the pneumatic tool is compatible with the 1/4" outlet connection.
  4. Ensure operating pressure remains within the specified rating.
  5. Avoid dragging the hose over sharp edges or abrasive surfaces.
  6. Do not use a damaged or leaking hose.
  7. Store the hose properly when not in use.

Because the air hose is a wear-and-tear component, regular inspection is important for safe pneumatic operation.

Product Highlights

The SATA 98004 Φ6.5MM × 15M Air Hose Reel is a professional pneumatic hose management solution featuring a 15-metre, 6.5 × 10mm polyether TPU air hose, high-quality brass shaft, sleeve and hose joint, PM20 inlet plug and 1/4" Rc outlet coupler. It supports an operating pressure of 145psi / 10kgf/cm² and a maximum pressure of 175psi / 10kgf/cm². Its long hose length and organized reel configuration make it suitable for automotive workshops, pneumatic tool stations, industrial maintenance, machinery servicing and general workshop applications.



 Inquiry - SATA AIR HOSE REEL Φ6.5MM X 15M - 98004