B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


SATA H. DUTY LOW PROFILE SERVICE JACK (3.0 TON) - 97813A



The SATA 97813A Heavy Duty Low Profile Service Jack is a professional hydraulic floor jack designed for demanding automotive lifting applications. With a 3,000kg / 3-ton rated capacity, ultra-low 83mm minimum lifting height and 502mm maximum lifting height, it is particularly suitable for sports cars, lowered vehicles, passenger cars, SUVs and vehicles with limited ground clearance. SATA equips the jack with a reinforced steel body, dual-piston hydraulic pump, overload safety system, universal-joint release mechanism and rubber-padded lifting tray.

Key Features

  • 3-tonne / 3,000kg rated lifting capacity.
  • Heavy-duty reinforced steel construction.
  • Ultra-low 83mm minimum lifting height.
  • 502mm maximum lifting height.
  • Approximately 419mm lifting range.
  • Dual-piston / dual-pump hydraulic system for rapid lifting.
  • Hydraulic system automatically adapts lifting speed according to load.
  • Built-in overload safety valve.
  • Safety system prevents lifting beyond the rated capacity.
  • Factory tested at 1.5 times the rated load.
  • Universal-joint pressure-release mechanism.
  • Precision lowering control from different handle positions.
  • Dual-handle design for improved leverage and control.
  • Rubber-padded lifting tray protects vehicle lifting points.
  • Ergonomic handle design.
  • Suitable for low-clearance and modified vehicles.
  • Hydraulic performance designed to meet ASME PALD-2014 requirements.

Technical Specifications

Specification Details
Brand SATA
Model 97813A
Catalogue Model ST97813A
Product Type Heavy Duty Low Profile Service Jack
Rated Capacity 3 Ton / 3,000kg
Minimum Height 83mm
Maximum Height 502mm
Lifting Range Approx. 419mm
Hydraulic System Dual-Piston / Dual-Pump
Construction Reinforced Steel
Lifting Tray Rubber-Padded
Release Mechanism Universal Joint
Safety System Overload Safety Valve
Factory Overload Test 1.5 × Rated Capacity
Standard ASME PALD-2014
Product Dimensions Approx. 735 × 349 × 161mm
Net Weight Approx. 35kg
Warranty Excluded from SATA Lifetime Warranty

Published specifications vary slightly between distributors for overall dimensions and minimum height; SATA and catalogue data identify the model as a 3T low-profile service jack with a 502mm maximum height, while Malaysian listings commonly specify approximately 83mm minimum height, 735 × 349 × 161mm and 35kg.

3-Tonne Heavy-Duty Capacity

The 97813A provides a 3,000kg rated lifting capacity, making it suitable for a wide range of passenger vehicles and heavier automotive applications.

The reinforced construction is intended for professional workshop environments where the jack may be used repeatedly throughout the working day.

Typical compatible applications include:

  • Passenger cars
  • SUVs
  • Sports cars
  • Modified vehicles
  • Light commercial vehicles
  • Workshop vehicles
  • Fleet vehicles

The 3-tonne rating is the maximum rated lifting capacity. It must not be exceeded.

Ultra-Low 83mm Profile

One of the main advantages of the SATA 97813A is its extremely low entry height of approximately 83mm.

This allows the jack to be positioned beneath vehicles with low chassis clearance where a conventional service jack may not fit.

It is particularly useful for:

  • Sports cars
  • Lowered vehicles
  • Performance vehicles
  • Modified vehicles
  • Vehicles with flat tyres
  • Passenger cars with low jacking points

SATA specifically identifies the ultra-low profile as a feature for sports cars and vehicles with flat tyres or low chassis clearance.

502mm Maximum Lifting Height

The jack can raise the lifting tray to approximately 502mm.

Combined with the approximately 83mm minimum height, this provides a lifting range of roughly 419mm.

The high maximum position provides additional clearance for:

  • Brake servicing
  • Suspension repairs
  • Wheel removal
  • Exhaust repairs
  • Undercarriage inspection
  • Steering maintenance
  • General mechanical servicing

The actual lifting height required should always be determined by the vehicle manufacturer's approved lifting points and the specific repair task.

Dual-Piston Hydraulic Pump

The SATA 97813A incorporates a dual-piston / dual-pump hydraulic system designed to provide rapid lifting and improved workshop productivity.

The dual-pump system is designed to provide faster lifting when the load is relatively light. As the load increases, the hydraulic system adjusts its lifting behaviour to reduce the force required from the operator.

This is particularly useful for repeated vehicle lifting in professional workshops.

Automatic Lifting-Speed Adjustment

The dual hydraulic pump design is configured to automatically adjust lifting speed according to the load.

Under lighter loads, the system can provide faster initial lifting. Under heavier loads, the hydraulic system reduces the required handle effort.

This helps improve:

  • Lifting efficiency
  • Operator productivity
  • Handle operation
  • Workshop workflow
  • Repeated vehicle servicing

Built-In Overload Protection

The SATA 97813A incorporates a safety overload device designed to prevent the jack from lifting beyond its rated capacity.

Catalogue information indicates that when the actual load exceeds approximately 110% of the rated load, the safety valve automatically opens and prevents further lifting.

For a 3,000kg rated jack, this corresponds to approximately 3,300kg as the stated overload-protection threshold.

This is a safety mechanism, not an additional working capacity. The jack should always be operated within its 3,000kg rated load.

1.5× Factory Load Testing

SATA's product documentation states that each jack undergoes a 1.5× rated-load test before leaving the factory.

For a 3,000kg rated jack, this represents a factory test load of approximately 4,500kg.

This test is intended as a manufacturing quality and safety verification procedure. It does not mean that users can lift 4.5 tonnes with the jack.

The normal operating limit remains 3,000kg.

Universal-Joint Release Mechanism

The 97813A features a universal-joint pressure-release mechanism designed to provide controlled lowering and improved durability.

The universal-joint configuration allows the operator to control the release mechanism from different handle positions.

This is particularly useful when the jack is positioned underneath a vehicle and the handle cannot always be operated from a single convenient angle.

Dual-Handle Design

The jack incorporates a dual-handle design intended to provide improved leverage and a solid grip. SATA identifies this as one of the ergonomic features of the 97813A.

The long handle provides mechanical leverage for hydraulic pumping and also allows the operator to control the release mechanism.

The design is intended to make repeated lifting operations less demanding.

Rubber-Padded Lifting Tray

The lifting tray is fitted with a rubber pad to help protect the vehicle's lifting points from direct contact with the metal saddle.

The rubber pad helps:

  • Protect painted surfaces.
  • Reduce metal-to-metal contact.
  • Improve contact between the saddle and lifting point.
  • Reduce the risk of surface damage during normal use.
  • Improve positioning at compatible lifting points.

The rubber pad does not eliminate the need to use the vehicle manufacturer's designated lifting points.

Reinforced Steel Construction

The 97813A is manufactured with a reinforced steel body, providing the structural strength required for its 3-tonne capacity. SATA describes the construction as reinforced steel for professional service-jack applications.

This construction makes the jack suitable for demanding environments such as:

  • Automotive repair workshops
  • Vehicle service centres
  • Fleet maintenance facilities
  • Professional garages
  • Mechanical workshops

Ergonomic Design

The jack is designed with workshop ergonomics in mind.

Features include:

  • Dual handle configuration
  • Universal-joint release system
  • Long operating handle
  • Low-profile chassis
  • Controlled hydraulic release
  • Reinforced steel body

These features help the operator position, lift and lower vehicles efficiently during routine service operations.

Automotive Workshop Applications

The SATA 97813A is suitable for a wide variety of automotive maintenance tasks.

Typical applications include:

  • Wheel removal
  • Brake servicing
  • Suspension repairs
  • Shock absorber replacement
  • Steering system maintenance
  • Exhaust system repairs
  • Undercarriage inspection
  • Tyre servicing
  • Oil and mechanical maintenance
  • General vehicle repair

Sports Car Applications

The 83mm low entry height makes the 97813A particularly suitable for sports cars and other vehicles with low chassis clearance.

It can be useful for:

  • Performance cars
  • Sports cars
  • Modified cars
  • Lowered vehicles
  • Track-oriented vehicles
  • Vehicles with low side skirts or chassis components

The jack should only be used where the vehicle's approved lifting points are accessible and within the jack's safe operating range.

Vehicles With Flat Tyres

SATA specifically identifies the ultra-low-profile design as suitable for vehicles with flat tyres.

A flat tyre can substantially reduce the available clearance between the vehicle and the workshop floor. The 97813A's low minimum height can make positioning easier in such situations.

Professional Garage Use

The 3-tonne capacity and heavy-duty construction make the 97813A suitable for professional workshops requiring a robust floor jack for repeated vehicle lifting.

It is appropriate for:

  • Automotive technicians
  • Mechanical workshops
  • Service centres
  • Fleet maintenance departments
  • Performance-car workshops
  • Tyre and brake centres
  • General repair garages

Product Dimensions and Weight

The published product data specifies approximately 735 × 349 × 161mm and a net weight of around 35kg.

The relatively substantial weight reflects the jack's reinforced steel construction and 3-tonne lifting capacity.

Its long chassis provides useful reach beneath vehicles, while the low overall profile allows access to low jacking points.

ASME PALD-2014

The SATA 97813A is specified as having hydraulic performance designed to meet the ASME PALD-2014 standard.

ASME PALD covers portable automotive lifting devices and establishes requirements relating to safety, design, construction, testing and performance.

This provides a relevant engineering and safety reference for the jack's design.

SATA 97813A Advantages

3-tonne capacity: Suitable for a wide range of passenger and heavier vehicles.

Ultra-low 83mm entry height: Allows access beneath low-clearance vehicles.

502mm maximum height: Provides substantial lifting clearance.

Dual-piston pump: Provides rapid lifting and improved efficiency.

Automatic hydraulic adjustment: Helps reduce handle effort under heavier loads.

Overload safety valve: Helps prevent lifting beyond the rated capacity.

1.5× factory load testing: Each unit is tested above its rated capacity during manufacturing.

Universal-joint release: Allows controlled lowering from different handle positions.

Rubber-padded tray: Helps protect vehicle lifting points.

Reinforced steel construction: Designed for demanding professional use.

Dual-handle design: Provides improved leverage and ergonomic control.

ASME PALD-2014: Hydraulic performance is specified to meet the relevant American standard.

Important Safety Information

The SATA 97813A is a lifting jack, not a permanent support device.

When working underneath a vehicle:

  1. Park the vehicle on a firm, level surface.
  2. Apply the parking brake.
  3. Use wheel chocks where appropriate.
  4. Confirm that the vehicle weight is within the 3,000kg rated capacity.
  5. Identify the vehicle manufacturer's approved lifting points.
  6. Position the jack correctly under the lifting point.
  7. Ensure the jack is stable before lifting.
  8. Raise the vehicle slowly.
  9. Place appropriately rated jack stands under approved support points.
  10. Lower the vehicle onto the jack stands before working underneath it.
  11. Never rely solely on the hydraulic jack to support a vehicle while working underneath.
  12. Never exceed the 3-tonne rated capacity.
  13. Inspect the jack for hydraulic leaks, damaged welds, deformation or other defects before use.

The factory overload test and safety valve do not permit intentional overloading during normal operation.

Recommended Applications

The SATA 97813A Heavy Duty Low Profile Service Jack is suitable for:

  • Automotive workshops
  • Professional garages
  • Car repair centres
  • Sports-car workshops
  • Performance vehicle servicing
  • Low-profile vehicles
  • Lowered vehicles
  • Vehicles with flat tyres
  • SUV servicing
  • Light commercial vehicle maintenance
  • Fleet maintenance
  • Brake servicing
  • Suspension repairs
  • Wheel and tyre servicing
  • Exhaust maintenance
  • Undercarriage inspection

Product Highlights

The SATA 97813A Heavy Duty Low Profile Service Jack 3.0 Ton is a professional hydraulic floor jack with a 3,000kg rated capacity, ultra-low 83mm minimum height and 502mm maximum lifting height. Its reinforced steel construction and dual-piston hydraulic system are designed for demanding automotive applications, while the overload safety valve helps prevent lifting beyond the rated capacity. The dual-pump system provides rapid lifting and automatically adjusts hydraulic performance according to load. A universal-joint release mechanism, dual-handle design and rubber-padded lifting tray provide controlled operation, improved ergonomics and protection for vehicle lifting points. With approximately 35kg net weight and dimensions of 735 × 349 × 161mm, the 97813A is particularly suited to professional automotive workshops, sports cars, lowered vehicles, vehicles with flat tyres, passenger cars, SUVs and general vehicle maintenance. Its hydraulic performance is specified to meet ASME PALD-2014 requirements.



 Inquiry - SATA H. DUTY LOW PROFILE SERVICE JACK (3.0 TON) - 97813A