B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


SATA LOW PROFILE ALUMINIUM SERVICE JACK (1.5 TONNE) - 97821



The SATA 97821 Low Profile Aluminium Service Jack is a lightweight professional hydraulic floor jack designed for automotive workshops, garages, vehicle maintenance and low-clearance vehicles. Its aluminium-alloy construction provides a lighter and more corrosion-resistant body than conventional steel service jacks, while the 85mm minimum lifting height allows access beneath many low-profile vehicles and sports cars. The jack has a 1,500kg rated load capacity and a maximum lifting height of 470mm.

Key Features

  • 1.5-tonne / 1,500kg rated lifting capacity.
  • Low-profile design with only 85mm minimum height.
  • Maximum lifting height of 470mm.
  • Lightweight aluminium-alloy construction.
  • Aluminium body provides good corrosion resistance.
  • Dual-oil-circuit hydraulic pump for efficient lifting.
  • Hydraulic performance designed in accordance with ASME PALD-2014.
  • Universal-joint steering mechanism for improved durability and smoother operation.
  • Rubber pad on the lifting tray helps protect the vehicle's lifting point.
  • Designed for low-chassis vehicles and sports cars.
  • Each unit undergoes a 1.5× rated-capacity overload test before leaving the factory.
  • Compact 715 × 295 × 160mm overall dimensions.
  • Net weight approximately 19.5kg.

Technical Specifications

Specification Details
Brand SATA
Model 97821
Product Type Low Profile Aluminium Service Jack
Rated Capacity 1.5 Tonne / 1,500kg
Minimum Height 85mm
Maximum Height 470mm
Lifting Range 385mm
Product Dimensions 715 × 295 × 160mm
Net Weight 19.5kg
Construction Aluminium Alloy
Hydraulic System Dual-Oil-Circuit Pump
Lifting Pad Rubber-Padded Tray
Steering Mechanism Universal Joint
Standard ASME PALD-2014
Overload Test 1.5 × Rated Capacity
Warranty Excluded from SATA Lifetime Warranty

These specifications are based primarily on SATA's current product information and catalogue data.

1.5-Tonne Lifting Capacity

The SATA 97821 has a rated load of 1,500kg, making it suitable for many passenger vehicles and compatible light automotive applications.

The 1.5-tonne rating refers to the jack's rated lifting capacity and should not be interpreted as permission to lift any vehicle regardless of its weight distribution or lifting-point requirements.

Before lifting, verify:

  • Vehicle weight.
  • Manufacturer-approved lifting points.
  • Jack capacity.
  • Ground condition.
  • Load distribution.
  • Required lifting height.

Never exceed the rated 1,500kg capacity.

Low-Profile 85mm Minimum Height

One of the main advantages of the 97821 is its 85mm minimum lifting height.

The low entry height allows the jack to be positioned beneath vehicles with limited ground clearance.

This makes it particularly useful for:

  • Sports cars
  • Low-profile passenger cars
  • Modified vehicles
  • Lowered vehicles
  • Performance vehicles
  • Workshop vehicles with low chassis clearance

Compared with conventional high-profile service jacks, the 97821 can provide easier access to low vehicle lifting points.

470mm Maximum Height

The jack can raise the lifting tray to approximately 470mm.

The 385mm lifting range between 85mm and 470mm provides flexibility for a variety of automotive maintenance tasks.

The maximum height can provide additional clearance for work involving:

  • Wheels
  • Brakes
  • Suspension
  • Exhaust systems
  • Undercarriage inspection
  • General mechanical servicing

The actual safe lifting height depends on the vehicle, support-point position and work being performed.

Aluminium-Alloy Construction

The 97821 is manufactured from aluminium alloy, giving the jack a combination of structural strength, reduced weight and corrosion resistance. SATA specifically identifies the aluminium construction as a feature intended to provide light weight and corrosion resistance.

This makes the jack easier to move around a workshop than many heavier steel service jacks.

The aluminium construction is particularly useful for:

  • Mobile mechanics
  • Professional workshops
  • Motorsport applications
  • Garage use
  • Service vehicles
  • Technicians who frequently reposition equipment

Lightweight 19.5kg Design

The SATA 97821 has a net weight of approximately 19.5kg.

For a 1.5-tonne-capacity floor jack, the aluminium construction helps keep the equipment relatively manageable.

Its lower weight can make it easier to:

  • Transport around a workshop.
  • Position beneath vehicles.
  • Store after use.
  • Move between service bays.
  • Load into a service vehicle.

Dual-Oil-Circuit Hydraulic Pump

The 97821 uses a dual-oil-circuit hydraulic pump designed for efficient lifting performance. SATA states that the hydraulic pump performance complies with ASME PALD-2014.

The dual-pump configuration is designed to provide efficient hydraulic pressure generation during the lifting process.

This is particularly useful when technicians need to raise vehicles efficiently during repeated workshop operations.

Universal-Joint Steering Mechanism

The jack incorporates a universal-joint steering mechanism, which is designed to improve durability and provide controlled manoeuvrability.

The steering mechanism allows the jack to be positioned and moved more conveniently around the vehicle.

This is useful when working in confined workshop spaces or when accurately positioning the lifting tray underneath a vehicle's approved lifting point.

Rubber-Padded Lifting Tray

The lifting tray is equipped with a rubber pad designed to protect the vehicle's lifting area.

The rubber surface helps reduce direct metal-to-metal contact between the jack and the vehicle.

It can help:

  • Protect painted or coated surfaces.
  • Improve contact with the lifting point.
  • Reduce slipping.
  • Reduce surface damage during normal lifting.

The rubber pad does not replace the requirement to use the vehicle manufacturer's specified lifting points.

1.5× Overload Testing

SATA states that each 97821 unit is subjected to an overload test at 1.5 times the rated tonnage and must pass the test before leaving the factory.

For the 1,500kg rated capacity, this corresponds to a factory overload test level of 2,250kg.

This is a manufacturing quality-control test and should not be interpreted as the jack's operating capacity. The user must never intentionally exceed the specified 1,500kg rated load.

ASME PALD-2014 Hydraulic Performance

The SATA product information states that the dual-oil-circuit hydraulic pump's performance is in line with ASME PALD-2014.

This provides a relevant design and performance reference for the hydraulic lifting system.

Compact Dimensions

The SATA 97821 measures approximately:

715mm × 295mm × 160mm

with a net weight of approximately 19.5kg.

The relatively compact dimensions make it suitable for workshop storage while retaining a long chassis design for positioning underneath vehicles.

Automotive Workshop Applications

The SATA 97821 is designed for a broad range of automotive service applications.

Typical uses include:

  • Wheel removal
  • Brake servicing
  • Suspension inspection
  • Shock absorber replacement
  • Exhaust system servicing
  • Undercarriage inspection
  • Tyre service
  • General mechanical repairs
  • Routine vehicle maintenance

Its low 85mm entry height is particularly useful for vehicles with limited ground clearance.

Sports Car and Low-Chassis Applications

The low-profile configuration makes the 97821 suitable for low-chassis sports cars and other vehicles with reduced ground clearance. SATA specifically highlights the ultra-low design for low-chassis sports cars.

The 85mm minimum height allows the lifting tray to reach low support points that may be inaccessible to conventional service jacks.

Professional Garage Use

The 97821 is suitable for:

  • Automotive repair workshops
  • Performance-car workshops
  • Motorsport garages
  • Vehicle service centres
  • Tyre and brake workshops
  • Independent mechanics
  • Fleet maintenance facilities
  • Professional garages

The aluminium construction also makes it useful where the jack must be moved frequently between work areas.

Mobile Service Applications

The relatively low 19.5kg net weight makes the 97821 more practical for applications where equipment needs to be transported or repositioned.

Potential applications include:

  • Mobile automotive service
  • Motorsport support
  • Track-day support
  • Vehicle inspection
  • Service vehicles
  • On-site mechanical maintenance

Safety Features

The 97821 incorporates several features intended to improve lifting safety and reliability:

  • Rated 1,500kg capacity.
  • Factory 1.5× overload testing.
  • Dual-oil-circuit hydraulic system.
  • Rubber-padded lifting tray.
  • Low-profile chassis.
  • Robust aluminium-alloy construction.
  • Universal-joint steering mechanism.

The jack must nevertheless be used on a suitable surface and within its rated capacity.

Important Safety Instructions

The SATA 97821 is a lifting device, not a permanent vehicle-support stand.

When working underneath a raised vehicle:

  1. Park on a firm, level surface.
  2. Engage the parking brake and use wheel chocks where appropriate.
  3. Confirm the vehicle's approved lifting points.
  4. Verify that the vehicle weight is within the jack's 1,500kg rated capacity.
  5. Position the jack correctly before lifting.
  6. Keep the lifting tray centred under the approved lifting point.
  7. Raise the vehicle slowly and steadily.
  8. Use appropriately rated jack stands before working underneath the vehicle.
  9. Never rely solely on the hydraulic jack to support a vehicle while working underneath it.
  10. Do not exceed the 1.5-tonne rated load.
  11. Inspect the hydraulic system, wheels, lifting tray and frame before use.
  12. Do not operate the jack if hydraulic leakage, structural damage or abnormal operation is observed.

SATA 97821 Advantages

Low 85mm entry height: Suitable for low-clearance and sports vehicles.

470mm maximum height: Provides substantial lifting range for automotive service work.

1.5-tonne capacity: Suitable for many passenger vehicles and compatible light-duty applications.

Aluminium-alloy body: Reduces weight and provides corrosion resistance.

19.5kg net weight: Easier to reposition than many heavier service jacks.

Dual-oil-circuit pump: Provides efficient hydraulic lifting.

Rubber lifting pad: Helps protect vehicle contact points.

Universal-joint steering: Provides improved manoeuvrability and durability.

Factory overload test: Each unit is tested at 1.5× rated tonnage before leaving the factory.

ASME PALD-2014 performance: Hydraulic pump performance is specified in line with this standard.

Recommended Applications

The SATA 97821 Low Profile Aluminium Service Jack is suitable for:

  • Automotive workshops
  • Car repair centres
  • Professional garages
  • Sports-car workshops
  • Low-profile vehicles
  • Modified/lowered vehicles
  • Motorsport applications
  • Brake servicing
  • Suspension repair
  • Wheel and tyre servicing
  • Exhaust maintenance
  • Undercarriage inspection
  • Mobile mechanics
  • General vehicle maintenance

Product Highlights

The SATA 97821 Low Profile Aluminium Service Jack 1.5 Tonne is a lightweight professional hydraulic floor jack with a 1,500kg rated load, 85mm minimum height and 470mm maximum height. Its aluminium-alloy construction provides reduced weight and corrosion resistance, while the dual-oil-circuit hydraulic pump delivers efficient lifting performance in line with ASME PALD-2014. A rubber-padded lifting tray helps protect vehicle contact points, while the universal-joint steering mechanism improves manoeuvrability. Measuring 715 × 295 × 160mm and weighing approximately 19.5kg, the 97821 is particularly suitable for low-clearance sports cars, passenger vehicles, professional automotive workshops, garages and mobile service applications. SATA also specifies a 1.5× rated-capacity factory overload test for each unit.



 Inquiry - SATA LOW PROFILE ALUMINIUM SERVICE JACK (1.5 TONNE) - 97821