B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LUTIAN GASOLINE WATER PUMPS - LT20CX-168F-1



The LUTIAN LT20CX-168F-1 is a portable 2-inch gasoline water pump designed for efficient water transfer, irrigation, drainage, construction-site dewatering, agricultural applications, and general-purpose water pumping. Powered by a 6.5HP LT168F-1 gasoline engine, this pump combines strong pumping performance with a compact and practical design for applications where an independent petrol-powered water pump is required. The unit has a maximum water capacity of 30m³/h, a maximum pump lift of 23m, and a maximum suction head of 7m.

The pump uses 2-inch (50mm) inlet and discharge ports, providing a practical balance between water flow and portability. With a maximum capacity of approximately 30m³/h, it can move substantial volumes of water for irrigation, drainage, water transfer, and other demanding pumping tasks. The 23m maximum pump lift provides sufficient pressure and elevation capability for many agricultural, domestic, and construction applications.

Power is supplied by the LUTIAN LT168F-1 single-cylinder, 4-stroke, OHV, air-cooled gasoline engine. The engine has a 196cc displacement and produces a maximum output of 4.8kW / 6.5HP. Its air-cooled design eliminates the need for a radiator or coolant system, while the 4-stroke configuration provides a practical and reliable power source for continuous water-pumping applications.

The LT20CX-168F-1 is designed as a self-priming-style centrifugal water pump, allowing the pump to establish water flow after the initial priming process. LUTIAN's gasoline water pump series is described with durable pump construction, mechanical water seals, cast-iron impeller and inner casing components, and aluminium die-cast pump casing construction. These design features are intended to provide durability and reliable water-sealing performance during regular operation.

Its compact dimensions of approximately 485 × 380 × 405mm and net weight of approximately 24kg make the LT20CX-168F-1 relatively easy to transport between work locations. The gasoline engine also allows the pump to operate independently of an electrical power supply, making it particularly suitable for farms, plantations, construction areas, drainage locations, and outdoor sites where mains electricity may not be readily available.

KEY FEATURES:
• 2-inch gasoline-powered water pump
• 6.5HP maximum engine output
• LUTIAN LT168F-1 gasoline engine
• 196cc engine displacement
• Single-cylinder, 4-stroke OHV engine
• Air-cooled engine design
• Maximum water capacity of 30m³/h
• Maximum pump lift of 23m
• Maximum suction head of 7m
• 2" / 50mm inlet and discharge ports
• Portable and compact construction
• Mechanical water seal for dependable water sealing
• Durable pump casing and internal components
• Suitable for independent operation without mains electricity
• Practical design for agricultural and construction applications

TECHNICAL SPECIFICATIONS:
Brand: LUTIAN
Model: LT20CX-168F-1
Product Type: Gasoline Water Pump
Fuel Type: Gasoline / Petrol
Engine Model: LT168F-1
Engine Type: Single Cylinder, 4-Stroke, OHV, Air-Cooled
Engine Displacement: 196cc
Maximum Engine Output: 4.8kW / 6.5HP
Inlet / Discharge Diameter: 2" / 50mm
Maximum Capacity: 30m³/h
Maximum Pump Lift: 23m
Maximum Suction Head: 7m
Overall Dimensions: 485 × 380 × 405mm
Net Weight: Approximately 24kg

APPLICATIONS:
The LUTIAN LT20CX-168F-1 is suitable for a wide range of water-transfer and drainage applications, including:

• Agricultural irrigation
• Plantation and farm water transfer
• Garden and landscape irrigation
• Pond and tank drainage
• Construction-site dewatering
• Floodwater and standing-water removal
• General water transfer
• Rural and outdoor water supply
• Agricultural machinery applications
• Emergency drainage applications

PERFORMANCE AND DESIGN:
The 6.5HP LT168F-1 engine provides the power required to operate the 2-inch centrifugal pump at a maximum flow rate of 30m³/h. The 23m maximum pump lift allows water to be transferred to elevated locations, while the 7m maximum suction head provides practical suction capability for drawing water from sources below pump level. Actual performance will vary according to suction height, discharge height, hose or pipe length, pipe diameter, fittings, water conditions, and other system resistance.

The compact 485 × 380 × 405mm body and approximately 24kg net weight make this model suitable for users who need a petrol water pump that can be moved between different work areas. Because it uses a gasoline engine rather than an electric motor, it is particularly useful for remote agricultural, construction, drainage, and outdoor locations where electrical power is unavailable or inconvenient.

MAINTENANCE:
For dependable long-term operation, users should check engine oil levels before operation, use clean and appropriate gasoline, inspect suction and discharge hoses for leaks or damage, keep the suction strainer clean, and ensure the pump is properly primed before starting pumping operation. Regular engine oil changes, air-filter inspection, spark-plug inspection, and general pump maintenance should be carried out according to the manufacturer's maintenance recommendations.

PRODUCT SUMMARY:
The LUTIAN LT20CX-168F-1 2" Gasoline Water Pump is a versatile 6.5HP petrol-powered pumping solution offering up to 30m³/h water flow, 23m maximum pump lift, and 7m maximum suction head. With its 196cc LT168F-1 OHV engine, compact portable construction, and 2-inch water connections, it is well suited for agricultural irrigation, drainage, construction dewatering, plantation work, and general outdoor water-transfer applications.



 Inquiry - LUTIAN GASOLINE WATER PUMPS - LT20CX-168F-1