The LEO BP-EMH 4-3 is an intelligent inverter-controlled stainless-steel horizontal multistage pump designed for automatic water pressure boosting. It integrates a variable-speed controller with the multistage pump, allowing the pump to adjust its operating speed according to actual water demand and maintain more consistent system pressure.
The LEO Malaysia technical documentation identifies the BP-EMH range as an intelligent pressure booster designed to generate constant pressure through an integrated variable-speed controller. It also specifies automatic operation, dry-run protection, low-noise pressurization and operation at different speeds to suit demand.
Product Specifications
| Specification | BP-EMH 4-3 |
|---|---|
| Brand | LEO |
| Series | BP-EMH |
| Model | BP-EMH 4-3 |
| Pump Type | Inverter Horizontal Multistage Pump |
| Pump Construction | Stainless Steel Horizontal Multistage |
| Control Type | Integrated Variable-Speed Inverter |
| Operation | Automatic |
| Pressure Control | Constant Pressure |
| Frequency | 50 Hz |
| Power Range of BP-EMH Series | 0.37 – 4.0 kW |
| Motor Efficiency | IE2 |
| Insulation Class | F |
| Protection Class | IP54 |
| Maximum Flow – Series | 28 m³/h |
| Maximum Head – Series | 84 m |
| Maximum Working Pressure | 10 bar |
| Maximum Liquid Temperature | +60°C |
| Pump Casing | Stainless Steel AISI 304 |
| Impeller | Stainless Steel AISI 304 |
| Pump Shaft | Stainless Steel AISI 304 |
| Base | Carbon Steel Q235 |
| Installation | Horizontal |
| Main Application | Automatic Water Pressure Boosting |
The above construction and series-level specifications are from LEO Pump Engineering Malaysia's BP-EMH/EMH technical documentation. Exact motor voltage, rated current, connection size and hydraulic operating points should be verified against the nameplate or model-specific datasheet before publishing them as fixed BP-EMH 4-3 specifications.
Main Features
• Intelligent inverter-controlled operation
• Automatic constant-pressure water supply
• Variable-speed operation according to actual demand
• Stainless-steel AISI 304 pump components
• Horizontal multistage centrifugal construction
• Built-in dry-run protection
• Automatic operation under suitable operating conditions
• Low-noise pressurization
• Compact design
• Minimal maintenance requirements
• Easy installation and operation
• Pump speed automatically varies according to water demand
• Suitable for domestic and commercial pressure boosting
• Energy-saving operation through variable-speed control
LEO specifically identifies constant-pressure control, variable-speed operation, dry-run protection, compact construction, low-noise pressurization and minimal maintenance as characteristics of the BP-EMH series.
Intelligent Inverter Control
The BP-EMH 4-3 is designed to respond automatically to changes in water consumption.
When a water outlet is opened, system pressure falls. The pressure-control system detects this change and increases pump speed to supply additional water.
When demand decreases, the controller reduces motor speed. When water consumption stops, the pump can stop automatically under the appropriate operating conditions.
This provides:
• More stable water pressure
• Automatic pressure adjustment
• Reduced pressure fluctuations
• Reduced unnecessary full-speed operation
• Smoother motor operation
• Improved operating efficiency
• Automatic start/stop operation
• Better matching of pump output to actual demand
Horizontal Multistage Design
The BP-EMH 4-3 uses a horizontal multistage centrifugal pump arrangement. Multiple impeller stages work together to produce the required discharge pressure.
This configuration provides a relatively compact solution for applications where higher pressure is required from a horizontal pump.
LEO's EMH family is designed for household water supply, equipment support, pipeline pressurization, garden watering, greenhouse irrigation, fish farming, poultry farming, industrial and mining applications, enterprise water supply and drainage, high-rise buildings, central air-conditioning and heating circulation systems.
Stainless-Steel Construction
The pump's hydraulic components use AISI 304 stainless steel, including the casing, impellers and pump shaft. This construction provides good corrosion resistance for clean-water applications and is suitable for applications where durable wetted components are required.
The base is specified as carbon steel Q235.
Pressure Boosting Applications
The BP-EMH 4-3 can be used for:
• Domestic water pressure boosting
• Residential water supply
• Multi-storey houses
• Villas
• Apartments
• Small commercial buildings
• Offices
• Shops
• Restaurants
• Hotels
• Schools
• Pipeline pressure boosting
• Water tank boosting
• Garden watering
• Greenhouse irrigation
• Equipment water supply
• Light industrial water systems
The broader EMH family is officially described for household water supply, equipment support, pipeline pressurization, irrigation, industrial applications and high-rise building water systems.
Dry-Run Protection
The BP-EMH series incorporates built-in dry-run protection. This is intended to help protect the pump when sufficient water is not available.
Dry-running can cause excessive heat, seal damage and accelerated wear. The protection system helps reduce this risk by preventing prolonged operation under unsuitable water-supply conditions.
Low-Noise Operation
The BP-EMH design is intended for low-noise pressure boosting. This makes it suitable for installation in locations where excessive pump noise would be undesirable, including residential buildings, offices and other occupied premises.
Correct installation, pipe sizing and adequate mounting are still important for minimizing transmitted vibration and operating noise.
Operating Conditions
The LEO Malaysia BP-EMH technical document specifies the following series-level operating conditions:
• Maximum liquid temperature: +60°C
• Maximum working pressure: 10 bar
• Frequency: 50 Hz
• Maximum flow for the series: 28 m³/h
• Maximum head for the series: 84 m
• Protection class: IP54
• Insulation class: F
• Motor efficiency: IE2
These are BP-EMH/EMH series specifications and should not be interpreted as the individual BP-EMH 4-3's maximum hydraulic performance.
Installation Recommendations
For reliable operation:
• Install the pump horizontally on a firm and level surface.
• Use correctly sized suction and discharge piping.
• Ensure suction connections are completely airtight.
• Avoid excessive restrictions on the suction side.
• Support the pipework independently from the pump.
• Install appropriate isolation valves where required.
• Ensure adequate water supply to the pump.
• Provide proper electrical grounding/earthing.
• Protect the inverter/controller from unsuitable environmental conditions.
• Provide adequate space for inspection and maintenance.
• Avoid operating the pump outside its specified hydraulic range.
Suitable Fluid
The BP-EMH 4-3 is primarily intended for clean water and compatible liquids.
Suitable applications include:
• Fresh water
• Clean storage-tank water
• Treated water
• General service water
• Clean irrigation water
Avoid pumping abrasive slurry, heavily contaminated water or chemically aggressive liquids unless compatibility with the pump materials has been confirmed.
Maintenance
Recommended periodic checks include:
• Inspecting the pump for leakage
• Checking suction and discharge connections
• Checking electrical connections
• Monitoring operating pressure
• Checking for unusual vibration
• Checking for abnormal noise
• Inspecting valves and piping
• Ensuring adequate water supply
• Keeping the pump and controller clean
• Checking seals and wear components when required
• Confirming that the pump is not repeatedly entering dry-run conditions
Advantages of BP-EMH 4-3
Constant Pressure: The integrated inverter allows the pump to vary its speed to maintain more consistent pressure.
Automatic Operation: The pump can automatically respond to changes in water demand.
Stainless-Steel Construction: AISI 304 stainless steel is used for the casing, impeller and shaft.
Compact Design: The horizontal multistage configuration provides a space-efficient pressure-boosting solution.
Dry-Run Protection: Built-in protection helps reduce damage caused by inadequate water supply.
Low Noise: Designed for low-noise pressurization, making it suitable for residential and commercial environments.
Variable-Speed Operation: Pump speed changes according to demand instead of maintaining a single fixed operating speed.
Product Summary
The LEO BP-EMH 4-3 is an intelligent inverter horizontal multistage pump designed for automatic constant-pressure water boosting. Its stainless-steel AISI 304 hydraulic components, variable-speed controller, dry-run protection, compact horizontal design and automatic operation make it suitable for domestic, commercial, irrigation and general clean-water pressure-boosting applications.
Inquiry - LEO INVERTER HORIZONTAL MULTISTAGE PUMPS - BP-EMH 4-3