The LEO XKF-35P is a compact 35 W submersible fountain pump designed for decorative fountains, garden ponds, artificial water features, pond filtration and water oxygen enrichment. It delivers a maximum flow of 1,600 L/h (26.7 L/min) with a maximum head of 1.4 m, making it suitable for small-to-medium decorative fountain installations where low power consumption and continuous water circulation are required. LEO specifies a 220–240 V, 50 Hz supply, 19 mm outlet and 10 m H05RN-F cable.
Product Description
The LEO XKF-35P is a fully submersible fountain pump with a compact plastic construction. It is designed to circulate water directly within ponds, fountain basins and decorative water installations.
With only 35 W input power, the pump can move up to 1,600 litres of water per hour under maximum-flow conditions. Its 1.4 m maximum head makes it appropriate for relatively low-height fountain displays, small waterfalls and decorative water circulation rather than high-pressure water transfer.
The XKF series is specifically designed for pond-water filtration, decorative water displays and oxygen enrichment. LEO also provides multiple nozzle configurations for producing different visual water effects such as cascade and water-bell patterns.
Key Specifications
| Specification | LEO XKF-35P |
|---|---|
| Brand | LEO |
| Model | XKF-35P |
| Product Type | Submersible Fountain Pump |
| Application | Fountain / Pond / Water Feature |
| Input Power | 35 W |
| Voltage | 220–240 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Maximum Flow | 1,600 L/h |
| Maximum Flow | Approx. 26.7 L/min |
| Maximum Head | 1.4 m |
| Outlet | 19 mm |
| Cable | H05RN-F |
| Cable Length | 10 m |
| Pump Casing | Plastic |
| Installation | Fully Submersible |
| Protection | IPX8 |
| Maximum Fluid Temperature | 35°C |
| Maximum Ambient Temperature | 40°C |
| Suitable Liquid | Clean Water |
| Fountain Nozzles | Multiple configurations available |
LEO's published technical table confirms 35 W input power, 1.4 m maximum head, 1,600 L/h maximum flow, 19 mm outlet and 10 m H05RN-F cable for the XKF-35P.
Pump Performance
The XKF-35P is primarily a high-circulation, low-head fountain pump.
Its published maximum figures are:
- Maximum flow: 1,600 L/h
- Maximum flow: approximately 26.7 L/min
- Maximum head: 1.4 m
- Power consumption: 35 W
- Outlet: 19 mm
The maximum 1,600 L/h figure is the pump's maximum-flow rating and should not be interpreted as the flow available at 1.4 m head. As the fountain height, hose length, nozzle restriction and piping resistance increase, actual flow will decrease.
For this reason, the XKF-35P is best suited to low-height fountain effects, pond circulation and decorative water features.
Fountain Applications
The XKF-35P can be used for:
- Garden fountains
- Decorative ponds
- Artificial ponds
- Small waterfalls
- Ornamental water features
- Pond circulation
- Pond filtration systems
- Water oxygen enrichment
- Fountain basins
- Garden water displays
- Small indoor/outdoor decorative fountains
LEO specifically identifies the XKF series for pond-water filtration, decorative pond ornamentation and oxygen enrichment.
Fountain Nozzle Options
The XKF series is designed to work with various fountain nozzles. LEO's catalogue identifies:
- Cascade
- Water Bell
- Foaming Jet
- Water Lily
- Pelunica
LEO states that Cascade and Water Bell are standard nozzle configurations, while Foaming Jet, Water Lily and Pelunica are available on request depending on the supply configuration.
Some regional XKF-35P listings specify a package with multiple fountain nozzles, while the exact supplied nozzle set can vary by market and distributor.
Construction
Plastic Casing
The XKF-35P uses a plastic casing, keeping the pump compact and lightweight. LEO describes the XKF construction as small, lightweight, durable and reliable.
Technopolymer Hydraulic Components
Some detailed XKF-35P listings specify technopolymer for the pump casing, impeller, outlet and fountain nozzles.
Submersible Design
The pump is designed to operate directly underwater, eliminating the need for a conventional suction pipe.
10 m Power Cable
The standard H05RN-F 10 m cable provides useful reach when positioning the pump inside a pond, fountain basin or garden water feature.
Motor & Protection
The XKF-35P uses a compact sealed motor designed for submerged fountain operation. One detailed XKF-35P specification identifies the motor as a hermetically sealed synchronous motor, with Class B insulation and IP68 protection.
The IPX8/IP68-class protection is appropriate for a pump intended to operate fully submerged. The pump should nevertheless be installed and operated according to the manufacturer's immersion and electrical-safety requirements.
Operating Limits
LEO specifies the following operating conditions for the XKF series:
- Maximum fluid temperature: 35°C
- Maximum ambient temperature: 40°C
- Suitable liquid: Clean water
- Installation: Submerged
- Maximum head: 1.4 m
- Maximum flow: 1,600 L/h
The pump is intended for clean fountain/pond water and should not be used as a sewage pump or for heavily contaminated, abrasive or fibrous liquids.
Recommended Applications
1. Decorative Garden Fountains
The 1.4 m maximum head is suitable for creating modest-height fountain displays.
2. Garden Ponds
The pump continuously circulates water, helping prevent stagnant water.
3. Small Waterfalls
The pump can be used for low-height cascade effects when the required flow and head remain within its performance range.
4. Pond Oxygen Enrichment
Movement and splashing of the water can increase contact between water and air, supporting oxygen exchange.
5. Pond Filtration
It can circulate water through a suitable small filtration system.
6. Decorative Water Features
Its compact size makes it suitable for artificial ponds, water gardens and ornamental installations.
Advantages
- 35 W low-power operation
- Maximum flow of 1,600 L/h
- Maximum head of 1.4 m
- 19 mm outlet
- 10 m H05RN-F power cable
- Fully submersible design
- IPX8/IP68-class protection
- Compact plastic construction
- Low operating energy consumption
- Suitable for continuous water circulation
- Multiple fountain nozzle options
- Suitable for ponds and decorative water features
- Can assist pond oxygen enrichment
- Suitable for cascade and water-bell effects
XKF Series Comparison
| Model | Power | Max. Head | Max. Flow | Outlet | Cable |
|---|---|---|---|---|---|
| XKF-15P | 15 W | 1.0 m | 850 L/h | 13 mm | 10 m |
| XKF-35P | 35 W | 1.4 m | 1,600 L/h | 19 mm | 10 m |
| XKF-55P | 55 W | 2.3 m | 2,300 L/h | 19 mm | 10 m |
| XKF-75P | 75 W | 2.7 m | 2,650 L/h | 19 mm | 10 m |
| XKF-95P | 95 W | 3.0 m | 3,500 L/h | 19 mm | 10 m |
| XKF-110P | 110 W | 3.7 m | 3,750 L/h | 19 mm | 10 m |
The XKF-35P sits between the smaller XKF-15P and the higher-output XKF-55P, providing a useful step up to 1,600 L/h and 1.4 m head while retaining a relatively low 35 W power requirement.
Important Selection Note
The XKF-35P is a fountain/pond circulation pump, not a general-purpose drainage pump. Its 1.4 m maximum head makes it suitable for low-height decorative water applications, but it should not be selected where water must be pumped several metres vertically or through a long, restrictive pipe system.
When designing a fountain, allow for losses from the hose, bends, fittings and nozzle. The desired fountain height should remain comfortably below the pump's 1.4 m maximum head so that adequate water flow remains available at the nozzle.
Technical Product Data
Brand: LEO
Model: XKF-35P
Category: Fountain Pump
Pump Type: Submersible Fountain Pump
Input Power: 35 W
Voltage: 220–240 V
Frequency: 50 Hz
Phase: Single Phase
Maximum Flow: 1,600 L/h
Maximum Flow: Approx. 26.7 L/min
Maximum Head: 1.4 m
Outlet: 19 mm
Cable: H05RN-F
Cable Length: 10 m
Pump Casing: Plastic
Hydraulic Components: Technopolymer
Protection: IPX8/IP68-class
Insulation: Class B
Maximum Fluid Temperature: 35°C
Maximum Ambient Temperature: 40°C
Installation: Fully Submersible
Suitable Liquid: Clean Water
Applications: Fountains, ponds, water features, filtration and oxygen enrichment
Nozzle Options: Cascade, Water Bell, Foaming Jet, Water Lily and Pelunica, depending on configuration.
Inquiry - LEO FOUNTAIN PUMPS - XKF-35P