The LEO EKJ-602P is a compact 0.6 kW / 0.8 HP self-priming garden jet pump designed for clean-water transfer, domestic water pressurisation, garden irrigation and shallow-well water supply. It operates on 220 V single phase and provides a published maximum head of approximately 35 m.
An important specification distinction is that, despite being marketed in some Malaysian listings as a “deep well” jet pump, the EKJ-602P has a maximum suction lift of only about 7–8 m. It is therefore better classified as a shallow-well/surface self-priming jet pump, rather than a 30–40 m deep-well ejector pump such as the AJDM series. Current Malaysian listings report 50–60 L/min maximum flow, 35 m maximum head and 7–8 m maximum suction.
Technical Specifications
| Specification | LEO EKJ-602P |
|---|---|
| Brand | LEO |
| Series | EKJ |
| Model | EKJ-602P |
| Pump Type | Self-Priming Garden Jet Pump |
| Application | Garden / Domestic Water Pressurisation |
| Motor Power | 0.6 kW / 0.8 HP |
| Voltage | 220 V |
| Phase | Single Phase |
| Frequency | 50 Hz |
| Maximum Flow | 50–60 L/min* |
| Maximum Head | 35 m |
| Maximum Suction | 7–8 m* |
| Inlet / Outlet | 1" × 1" / 25 × 25 mm |
| Impeller | Closed Impeller |
| Shaft | AISI 304 Stainless Steel |
| Pump Body | Plastic |
| Motor Winding | Copper |
| Thermal Protection | Built-In |
| Mechanical Seal | Carbon / Ceramic |
| Protection Class | IPX4 |
| Maximum Liquid Temperature | +35°C |
| Maximum Ambient Temperature | +40°C |
| Pump Configuration | Surface-Mounted |
| Duty | Continuous |
*Different regional listings specify 50 L/min and 7 m suction or 60 L/min and 8 m suction. The exact pump curve/nameplate supplied with your stock should be used as the final specification.
Pump Type and Operating Principle
The EKJ-602P is a self-priming jet pump. It uses a jet/venturi hydraulic arrangement to assist with priming and suction of water.
The pump is installed above the water source and draws water through the suction pipe. Once properly primed, the jet mechanism helps maintain suction and provides the pressure required for domestic and garden applications.
Unlike the LEO AJDM deep-well series, the EKJ-602P does not use a deep-well ejector installed several tens of metres down the well. Its practical suction capability is approximately 7–8 m.
This makes it particularly appropriate for:
- Ground-level water tanks
- Rainwater tanks
- Shallow wells
- Garden ponds
- Domestic water supply
- Garden irrigation
- Water pressure boosting
- Small water-transfer systems
0.6 kW / 0.8 HP Motor
The EKJ-602P is equipped with a 0.6 kW / 0.8 HP motor operating on 220 V, 50 Hz single-phase power.
This motor rating makes it suitable for typical household and garden applications where moderate flow and pressure are required.
The 0.8 HP rating offers a useful balance between:
- Pumping performance
- Electrical consumption
- Compact size
- Ease of installation
- Domestic water pressure
The motor uses copper winding and incorporates a built-in thermal protector for the single-phase configuration.
Pump Performance
The EKJ-602P has a published maximum head of approximately 35 m.
Depending on the source, maximum flow is listed as either 50 L/min or 60 L/min.
The pump does not deliver maximum flow and maximum head simultaneously.
As with other centrifugal jet pumps:
| Operating Condition | Expected Performance |
|---|---|
| Low flow | Higher pressure/head |
| Medium flow | Balanced pressure and water delivery |
| High flow | Lower available head |
| Maximum flow | Lowest operating head |
The actual operating point depends on the total system resistance, including pipe length, pipe diameter, fittings, elevation and outlet pressure.
For a technical installation, the pump curve should always be used to select the expected flow at the required head.
Maximum Suction Lift
The EKJ-602P has a relatively modest suction capability of approximately 7–8 m. Malaysian specifications give either 7 m or 8 m, depending on the listing.
This is the most important specification to understand when comparing the EKJ-602P with LEO's AJDM deep-well pumps.
For example:
EKJ-602P: approximately 7–8 m suction
AJDM deep-well models: designed for substantially deeper well applications with an ejector system.
The EKJ-602P is therefore best suited to a shallow water source where the vertical distance from the pump to the water surface is within its practical suction limit.
Actual suction performance is affected by:
- Water temperature
- Atmospheric pressure
- Suction pipe diameter
- Suction pipe length
- Pipe friction
- Number of elbows
- Foot valve
- Air leakage
- Water level during pumping
The pump should be installed as close as practical to the water source.
1" × 1" Connections
The EKJ-602P uses 1" inlet and 1" outlet connections, equivalent to approximately 25 mm × 25 mm.
This connection size is well suited to typical:
- Garden hose systems
- Domestic water lines
- Small irrigation systems
- Tank-transfer systems
Proper pipe sizing remains important. Excessively long or undersized suction piping can substantially reduce pump performance.
For suction applications, the suction pipe should be appropriately sized and all connections must be airtight.
Closed Impeller
The EKJ-602P uses a closed impeller configuration. A closed impeller is suitable for clean-water pumping where relatively low suspended-solid content is expected.
The design provides efficient hydraulic transfer for applications such as:
- Domestic water
- Garden irrigation
- Tank water
- Clean groundwater
- Rainwater after suitable filtration
The pump should not be used for sewage, sludge or heavily contaminated water.
AISI 304 Stainless-Steel Shaft
The EKJ-602P incorporates an AISI 304 stainless-steel shaft.
This provides corrosion resistance and mechanical durability within the rotating assembly.
The stainless-steel shaft is particularly useful in clean-water applications where the pump may be exposed to groundwater or treated domestic water over extended periods.
Plastic Pump Body
The EKJ-602P is specified with a plastic pump body. Current LEO listings identify the EKJ-602P as a garden version with a plastic pump housing.
The lightweight construction provides several practical advantages:
- Lower overall pump weight
- Easy handling
- Corrosion resistance of the housing
- Suitable for domestic and garden applications
- Easy installation
One Malaysian supplier lists the product weight at approximately 7 kg, with package dimensions around 400 × 250 × 260 mm.
Copper Motor Winding
The motor uses copper winding, which provides good electrical conductivity and is commonly used in water-pump motors designed for continuous service.
Copper winding also supports effective heat transfer within the motor and contributes to reliable operation when the pump is correctly sized and installed.
Built-In Thermal Protection
The single-phase motor incorporates a built-in thermal protector.
This provides protection against excessive motor temperature caused by abnormal operating conditions.
External electrical protection should still be provided as required by the installation, including suitable:
- Circuit breaker
- Earthing
- Cable size
- Isolation switch
- Electrical connections
IPX4 Protection
The motor is specified with IPX4 protection.
This provides protection against water splashing from different directions.
The pump should nevertheless be installed in a suitable location protected from flooding and should not be submerged.
Temperature Rating
The EKJ-602P is specified for a maximum liquid temperature of +35°C and a maximum ambient temperature of +40°C.
This makes the pump appropriate for normal:
- Cold-water supply
- Garden irrigation
- Shallow-well water
- Domestic water
- Tank water
It should not be used as a hot-water circulation pump.
Recommended Applications
Garden Irrigation
The EKJ-602P is well suited to garden irrigation, including hoses, sprinklers and small irrigation systems.
Its 35 m maximum head provides useful pressure for many residential garden applications.
Domestic Water Pressurisation
LEO's EKJ series is designed for pressurisation of water in domestic applications.
It can be used to improve water pressure from:
- Storage tanks
- Ground-level tanks
- Shallow wells
- Rainwater collection systems
Shallow-Well Water Supply
The pump can draw clean water from a shallow well where the water level remains within its approximately 7–8 m suction capability.
Water Tank Transfer
The EKJ-602P can transfer water from one clean-water storage tank to another where the required flow and head are within the pump's operating range.
Rainwater Systems
With appropriate filtration, the pump can be used for non-potable rainwater distribution for:
- Garden irrigation
- Outdoor cleaning
- Landscape watering
- General utility applications
Important: EKJ-602P vs Deep-Well AJDM
Although the product title may describe the EKJ-602P as a “Jet Pump for Deep Well”, its published suction capability is only around 7–8 m.
This is materially different from the AJDM deep-well jet-pump series, which uses a deep-well ejector system.
| Feature | EKJ-602P | AJDM Deep-Well Series |
|---|---|---|
| Pump Type | Garden Jet Pump | Deep-Well Jet Pump |
| Motor | 0.6 kW / 0.8 HP | Various |
| Max. Head | 35 m | Model dependent |
| Max. Suction | 7–8 m | Much deeper with ejector |
| Ejector Down Well | No | Yes |
| Main Use | Garden / domestic | Deep-well water lifting |
| Installation | Surface | Surface + deep-well ejector |
| Connection | 1" × 1" | Model dependent |
| Pump Body | Plastic | Model dependent |
Therefore, the EKJ-602P should be selected for shallow suction applications, not simply because the product is marketed under a “deep-well” category.
Key Advantages
The LEO EKJ-602P provides:
- 0.6 kW / 0.8 HP motor
- 220 V single-phase operation
- 50 Hz frequency
- Self-priming jet-pump design
- 35 m maximum head
- 50–60 L/min maximum flow depending on specification
- 7–8 m maximum suction
- 1" × 1" connections
- Closed impeller
- AISI 304 stainless-steel shaft
- Plastic pump body
- Copper motor winding
- Built-in thermal protection
- IPX4 motor protection
- Maximum liquid temperature +35°C
- Compact and lightweight construction
- Suitable for garden irrigation
- Suitable for domestic water pressurisation
- Suitable for shallow-well water supply
- Suitable for water tank transfer.
Product Description
LEO EKJ-602P 0.6kW / 0.8HP Self-Priming Garden Jet Pump 220V is a compact surface-mounted jet pump designed for garden irrigation, domestic water pressurisation, shallow-well water supply and clean-water transfer. The pump operates on 220 V single-phase power and provides a maximum head of approximately 35 m, with published maximum flow specifications ranging from 50 to 60 L/min depending on the regional specification.
The EKJ-602P features a closed impeller, AISI 304 stainless-steel shaft, plastic pump body, copper motor winding, built-in thermal protector and IPX4 protection. Its approximately 7–8 m maximum suction lift makes it suitable for shallow wells, tanks and surface water sources rather than very deep wells requiring a remote ejector system.
With its compact construction, 1" × 1" connections and 0.8 HP motor, the LEO EKJ-602P is a practical solution for home water pressure boosting, garden watering, shallow-well pumping and small clean-water transfer systems.
SEO Product Title
LEO EKJ-602P 0.6kW 0.8HP 220V Self-Priming Garden Jet Pump 35m Head 1" × 1"
Short Product Description
LEO EKJ-602P is a 0.6kW / 0.8HP 220V self-priming garden jet pump designed for domestic water pressurisation, garden irrigation, shallow-well pumping and clean-water transfer. It features a 35 m maximum head, 50–60 L/min maximum flow depending on specification, 7–8 m maximum suction, 1" × 1" connections, closed impeller, AISI 304 stainless-steel shaft, plastic pump body, copper motor winding, built-in thermal protection and IPX4 protection. Its compact surface-mounted design makes it suitable for household, garden and small water-supply applications.
Inquiry - LEO JET PUMPS FOR DEEP WELL, GARDEN JET PUMPS - EKJ-602P