The LEO EKJ-802P is a 0.8 kW / 1.0 HP, 220 V single-phase self-priming garden jet pump designed for clean-water pumping, domestic water supply, water pressure boosting, shallow-well applications, garden irrigation and general water transfer.
It is a surface-mounted jet pump designed to provide higher pressure and water delivery than the 0.6 kW EKJ-602 series. The EKJ-802P is particularly suitable for home water systems, garden sprinklers, shallow wells, storage tanks and small irrigation systems.
Current product specifications for the EKJ-802P commonly indicate approximately 60 L/min maximum flow, 40 m maximum head and 8 m maximum suction, although specifications can vary slightly between regional versions. For final catalogue data, the nameplate and pump curve supplied with the actual unit should take precedence.
Technical Specifications
| Specification | LEO EKJ-802P |
|---|---|
| Brand | LEO |
| Series | EKJ |
| Model | EKJ-802P |
| Pump Type | Self-Priming Garden Jet Pump |
| Motor Power | 0.8 kW / 1.0 HP |
| Voltage | 220 V |
| Phase | Single Phase |
| Frequency | 50 Hz |
| Maximum Flow | Approx. 60 L/min* |
| Maximum Head | Approx. 40 m* |
| Maximum Suction | Approx. 8 m* |
| Inlet | 1" |
| Outlet | 1" |
| Impeller | Closed Impeller |
| Shaft | AISI 304 Stainless Steel |
| Pump Body | Plastic / Engineering Polymer |
| Motor Winding | Copper |
| Mechanical Seal | Carbon / Ceramic |
| Thermal Protection | Built-In |
| Insulation Class | F |
| Protection Class | IPX4 |
| Maximum Liquid Temperature | +35°C |
| Maximum Ambient Temperature | +40°C |
| Installation | Surface Mounted |
| Suitable Fluid | Clean Water |
| Main Applications | Garden, Domestic, Irrigation, Shallow Well, Water Transfer |
*Flow, head and suction specifications may differ by regional production version. Verify against the pump nameplate and manufacturer's performance curve before publishing fixed engineering values.
1.0 HP Motor
The EKJ-802P is equipped with a 0.8 kW / 1.0 HP single-phase motor, providing a higher power rating than the EKJ-602P 0.8 HP model.
The additional motor power makes the EKJ-802P suitable when the installation requires:
- Higher water pressure
- Greater delivery capacity
- Longer discharge piping
- Higher elevation
- Larger garden irrigation systems
- More demanding domestic water supply
The motor uses copper winding and incorporates thermal protection to help protect against excessive operating temperature.
Self-Priming Jet Pump Design
The EKJ-802P uses a self-priming jet-pump configuration.
The jet system helps create suction and allows the pump to draw water from a source below the pump after the system has been correctly filled and commissioned.
This makes the pump useful for applications where the water source is not directly beside the pump, including:
- Shallow wells
- Underground water tanks
- Ground-level storage tanks
- Rainwater tanks
- Garden reservoirs
- Domestic water storage
The pump must still be properly primed initially, and the suction line must remain airtight.
Maximum Flow
The EKJ-802P is generally listed with a maximum flow of approximately 60 L/min, equivalent to around 3.6 m³/h.
Maximum flow is obtained under low-head conditions. It should not be interpreted as the flow available at the pump's maximum head.
Actual flow depends on the complete hydraulic system, including:
- Static lift
- Discharge elevation
- Pipe length
- Pipe diameter
- Pipe friction
- Valves
- Elbows
- Filters
- Hose restrictions
- Required outlet pressure
For irrigation-system design, the required flow and total dynamic head should be matched against the manufacturer's pump curve.
Maximum Head – Approximately 40 m
The EKJ-802P provides a maximum head of approximately 40 m, depending on the specific regional specification.
This represents the maximum pressure-generating capability under low-flow conditions.
A 40 m water head corresponds roughly to 4 bar of static pressure, before system losses are considered.
In practical operation, the available pressure will decrease as water flow increases.
For example:
Higher flow → lower available head
Lower flow → higher available head
Therefore, the pump should be selected based on its operating point rather than simply its maximum 40 m head rating.
Maximum Suction – Approximately 8 m
The EKJ-802P is designed for a maximum suction lift of approximately 8 m.
This makes it suitable for shallow-well and surface-water applications.
The actual usable suction height can be lower depending on:
- Water temperature
- Atmospheric pressure
- Suction pipe size
- Suction pipe length
- Pipe friction
- Foot valve condition
- Air leakage
- Water-level fluctuations
For best performance, install the pump as close to the water source as practical.
Important Deep-Well Classification
The product category may describe the EKJ-802P as a “jet pump for deep well”, but the approximately 8 m suction capability means it should not be treated as a true deep-well ejector pump capable of lifting water from several tens of metres.
For genuinely deep wells, LEO's AJDM series uses a different deep-well ejector arrangement.
The EKJ-802P is more appropriately suited to:
Shallow wells + tanks + garden irrigation + domestic water supply
rather than very deep groundwater extraction.
1" Water Connections
The EKJ-802P uses approximately 1" inlet and 1" outlet connections.
The 1" connection size is suitable for common domestic and garden piping systems.
Typical applications include:
- Garden hoses
- Irrigation pipes
- Domestic water lines
- Storage tanks
- Shallow-well suction lines
For suction applications, the suction pipe should be adequately sized and all threaded connections should be properly sealed to prevent air leakage.
Closed Impeller
The EKJ-802P uses a closed impeller, which is designed primarily for clean-water applications.
The closed impeller provides efficient hydraulic performance while maintaining a compact pump configuration.
Recommended fluids include:
- Clean groundwater
- Fresh water
- Domestic water
- Filtered rainwater
- Irrigation water
- Storage-tank water
The pump should not be used for sewage, sludge, muddy water or liquids containing substantial abrasive solids.
AISI 304 Stainless-Steel Shaft
The rotating assembly uses an AISI 304 stainless-steel shaft.
This provides good resistance to corrosion and helps maintain reliable operation in clean-water environments.
The stainless-steel shaft is particularly useful in applications where the pump is repeatedly exposed to groundwater, domestic water or irrigation water.
Pump Body
The EKJ-802P uses a lightweight plastic/engineering-polymer pump housing, characteristic of the EKJ garden-pump design.
Advantages include:
- Lightweight construction
- Good corrosion resistance
- Easy handling
- Simple installation
- Suitable for domestic and garden applications
The pump is therefore considerably easier to handle than many traditional cast-iron surface pumps.
Copper Motor Winding
The motor incorporates copper winding.
Copper provides good electrical conductivity and contributes to reliable motor performance under normal operating conditions.
For a 220 V single-phase installation, appropriate external electrical protection and earthing should still be provided.
Built-In Thermal Protection
The motor includes built-in thermal protection to help prevent damage caused by excessive temperature.
Thermal protection is particularly useful when abnormal operating conditions occur, such as:
- Motor overload
- Restricted ventilation
- Excessive ambient temperature
- Mechanical resistance
- Prolonged abnormal operation
The thermal protector should not be regarded as a replacement for a properly designed electrical protection system.
Mechanical Seal
The EKJ-802P uses a mechanical shaft seal, commonly specified in carbon/ceramic construction for this class of LEO pump.
The mechanical seal prevents water from passing along the rotating shaft into the motor section.
To extend seal life:
- Never run the pump dry.
- Prime the pump correctly.
- Keep the suction system airtight.
- Avoid pumping abrasive water.
- Operate within the specified temperature and pressure range.
IPX4 Protection
The motor is specified with IPX4 protection.
This means the motor enclosure is designed to withstand water splashing from different directions.
The pump should nevertheless be installed in a location that is:
- Dry
- Well ventilated
- Protected from flooding
- Protected from direct immersion
Temperature Rating
The EKJ-802P is designed for normal clean-water pumping and is generally specified for liquid temperatures around +35°C maximum, with ambient temperature around +40°C maximum.
It is suitable for:
- Cold groundwater
- Domestic water
- Garden water
- Irrigation water
- Storage-tank water
It is not intended for high-temperature process water or hot-water circulation.
Garden Irrigation Applications
The 1 HP EKJ-802P is well suited to garden irrigation applications where additional pressure is required.
Potential uses include:
- Lawn sprinklers
- Garden sprinklers
- Hand-held watering hoses
- Landscape irrigation
- Greenhouses
- Vegetable gardens
- Small agricultural plots
The actual number of sprinklers that can operate simultaneously depends on their individual flow and pressure requirements.
Domestic Water Supply
The EKJ-802P can be used for domestic clean-water supply where the required flow and pressure fall within its performance curve.
Applications include:
- Supplying water from a storage tank
- Boosting low water pressure
- Supplying outdoor taps
- Supplying upper-level water points
- Supporting small domestic water systems
For automatic domestic operation, the pump can be paired with a suitable pressure switch, pressure controller or pressure tank.
Shallow-Well Pumping
With its approximately 8 m maximum suction capability, the EKJ-802P is suitable for shallow wells.
A properly installed foot valve should be used to help maintain the water column in the suction line.
The well should also have sufficient recovery capacity to prevent the water level from dropping below the pump's practical suction limit during operation.
Water Tank Transfer
The EKJ-802P can transfer clean water between storage tanks where the total head and required flow are within the pump's performance range.
Examples include:
- Ground tank to elevated tank
- Rainwater tank to irrigation system
- Storage tank to garden
- Reservoir to domestic tank
Pressure Boosting
The 1 HP motor and approximately 40 m maximum head make the EKJ-802P useful for selected pressure-boosting applications.
It can improve water pressure from:
- Low-pressure mains/storage systems
- Water tanks
- Rainwater systems
- Shallow wells
For domestic pressure boosting, the pump should be matched to the required pressure setpoint and water demand.
EKJ-802P vs EKJ-602P
| Specification | EKJ-802P | EKJ-602P |
|---|---|---|
| Motor Power | 0.8 kW / 1.0 HP | 0.6 kW / 0.8 HP |
| Voltage | 220 V | 220 V |
| Phase | Single Phase | Single Phase |
| Maximum Flow | Approx. 60 L/min | Approx. 50–60 L/min |
| Maximum Head | Approx. 40 m | Approx. 35 m |
| Maximum Suction | Approx. 8 m | Approx. 7–8 m |
| Connection | 1" × 1" | 1" × 1" |
| Impeller | Closed | Closed |
| Main Use | Higher-demand domestic/garden | Garden/domestic |
| Motor Rating | Higher | Lower |
The EKJ-802P is the better choice when the application requires more motor power and higher pressure capability than the EKJ-602P.
EKJ-802P vs AJDM Deep-Well Series
For catalogue purposes, this distinction is important.
| Feature | EKJ-802P | AJDM Series |
|---|---|---|
| Configuration | Garden Jet Pump | Deep-Well Jet Pump |
| Motor | 0.8 kW / 1 HP | Various |
| Maximum Suction | Approx. 8 m | Much deeper |
| Deep-Well Ejector | No | Yes |
| Installation | Surface pump | Surface pump + deep-well ejector |
| Best Application | Shallow well / garden | Deep well |
| Domestic Use | Yes | Yes |
| Garden Irrigation | Yes | Yes |
| Very Deep Well | Not recommended | Designed for this application |
Key Advantages
The LEO EKJ-802P offers:
- 0.8 kW / 1.0 HP motor
- 220 V single-phase operation
- 50 Hz frequency
- Self-priming jet-pump design
- Approximately 60 L/min maximum flow
- Approximately 40 m maximum head
- Approximately 8 m maximum suction
- 1" × 1" water connections
- Closed impeller
- AISI 304 stainless-steel shaft
- Lightweight pump construction
- Copper motor winding
- Built-in thermal protection
- Carbon/ceramic mechanical seal
- IPX4 protection
- Suitable for clean water
- Suitable for garden irrigation
- Suitable for domestic water supply
- Suitable for shallow wells
- Suitable for water tank transfer
- Suitable for pressure boosting
- Suitable for small-scale irrigation.
Installation Recommendations
For optimum performance, the EKJ-802P should be installed according to the following principles:
- Mount the pump on a solid, level foundation.
- Position it as close to the water source as practical.
- Keep suction lift within the specified limit.
- Use an appropriately sized suction pipe.
- Ensure every suction connection is airtight.
- Install a suitable foot valve/check valve.
- Minimize sharp bends and unnecessary fittings.
- Prime the pump before initial operation.
- Never operate the pump dry.
- Ensure adequate water supply to the pump.
- Provide proper electrical protection and earthing.
- Keep the motor adequately ventilated.
- Protect the pump from flooding.
For shallow-well applications, air leakage on the suction side can cause the pump to lose prime and fail to deliver water, even when the pump itself is functioning correctly.
Product Description
LEO EKJ-802P 0.8kW / 1.0HP 220V Self-Priming Garden Jet Pump is a compact, high-performance surface jet pump designed for domestic water supply, garden irrigation, shallow-well pumping, water tank transfer and pressure boosting. Its 0.8 kW motor provides higher pumping capability than the smaller EKJ-602 models, with a published maximum head of approximately 40 m and maximum flow of approximately 60 L/min, depending on the regional specification.
The pump features a closed impeller, AISI 304 stainless-steel shaft, copper-wound motor, mechanical seal, built-in thermal protection and IPX4 motor protection. Its self-priming design allows it to draw water from suitable sources below the pump, with a maximum suction capability of approximately 8 m.
The EKJ-802P is particularly suitable for home water pressure boosting, garden sprinkler systems, shallow wells, storage tanks, rainwater systems and small irrigation applications. For genuinely deep wells exceeding the practical suction capability of a surface jet pump, a dedicated LEO AJDM deep-well ejector system should be selected instead.
SEO Product Title
LEO EKJ-802P 0.8kW 1HP 220V Self-Priming Garden Jet Pump 40m Head 60L/min
Short Product Description
LEO EKJ-802P is a 0.8kW / 1HP 220V self-priming garden jet pump designed for domestic water supply, garden irrigation, shallow-well pumping, water tank transfer and pressure boosting. It provides approximately 60 L/min maximum flow, 40 m maximum head and 8 m maximum suction, with 1" × 1" water connections. The pump features a closed impeller, AISI 304 stainless-steel shaft, copper motor winding, mechanical seal, built-in thermal protection and IPX4 protection, making it a practical choice for clean-water applications in homes, gardens and small irrigation systems.
Inquiry - LEO JET PUMPS FOR DEEP WELL, GARDEN JET PUMPS - EKJ-802P