B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO PERIPHERAL, SELF-PRIMING PERIPEHRAL PUMPS - APSM 37AEW



The LEO APSM 37AEW is a compact 0.37 kW / 0.5 HP single-phase self-priming peripheral water pump, designed for domestic water supply, pressure boosting, small sprinkler systems and other clean-water applications. Its peripheral impeller provides good pressure performance from a relatively small motor, while the self-priming design makes it suitable for installations where the pump needs to draw water from a lower source. LEO identifies the APSm series for clean water and liquids with physical and chemical properties similar to water.

Product Specifications

Specification APSM 37AEW
Brand LEO
Model APSM 37AEW
Pump Type Self-Priming Peripheral Pump
Motor Type Single Phase
Rated Output Power 0.37 kW / 370 W / 0.5 HP
Voltage 220 V
Maximum Flow Rate 40 L/min
Minimum Flow Rate 5 L/min
Maximum Head 35 m
Head Range 35–0 m
Maximum Suction Lift 8 m
Inlet Size 1" / 25 mm
Outlet Size 1" / 25 mm
Shaft Material AISI 304 Stainless Steel
Impeller Brass/Bronze
Pump Body Cast Iron
Mechanical Seal Ceramic-Graphite-NBR
Insulation Class F
Protection Class IP44
Maximum Liquid Temperature +60°C
Maximum Ambient Temperature +40°C
Approx. Product Weight 8.5 kg
Approx. Dimensions 280 × 200 × 270 mm

The published APSM 37AEW specifications list a 5–40 L/min flow range, 35 m maximum head, 8 m maximum suction, and 1" × 1" connections.

Key Features

Self-Priming Design
The APSM 37AEW is designed for self-priming operation, making it suitable for water sources where the pump must draw water through a suction pipe. The maximum suction lift is specified at 8 metres.

0.5 HP Copper-Wound Motor
The pump uses a 0.37 kW / 0.5 HP single-phase motor with copper windings, providing an appropriate combination of pressure and flow for small domestic and light-duty water applications.

Built-In Thermal Protection
The single-phase motor incorporates a built-in thermal protection device with automatic protection and reset functionality, helping protect the motor against overheating during operation.

Brass/Bronze Peripheral Impeller
The brass/bronze impeller is designed for peripheral pumping, allowing the compact pump to develop relatively high pressure for its motor size. The construction also incorporates an anti-blocking arrangement to help address impeller clogging during starting after periods of inactivity.

Cast Iron Pump Construction
The pump body and support are manufactured from cast iron with special anti-rust treatment. This provides a robust construction suitable for regular water-pumping applications.

AISI 304 Stainless Steel Shaft
The pump uses an AISI 304 stainless steel shaft, providing improved resistance to corrosion and wear in normal clean-water service.

Ceramic-Graphite-NBR Mechanical Seal
The mechanical seal construction uses ceramic, graphite and NBR materials, providing sealing between the rotating shaft and pump body to help prevent water leakage during operation.

Compact 1" Connections
Both suction and discharge connections are 1" (25 mm), making the APSM 37AEW suitable for common small-diameter domestic water-piping installations.

Performance

With a maximum flow rate of approximately 40 L/min and maximum head of 35 m, the APSM 37AEW is intended for applications requiring moderate water flow with useful pressure. Actual flow decreases as the required delivery head increases, so the maximum 40 L/min and 35 m figures should not be interpreted as being available simultaneously. The manufacturer provides hydraulic performance curves for selecting the pump according to the required duty point.

Recommended Applications

The LEO APSM 37AEW is suitable for:

  • Domestic water supply
  • Small-house water pressure boosting
  • Water transfer between tanks
  • Small water storage tank systems
  • Automatic sprinkler systems
  • Small garden watering systems
  • Small irrigation applications
  • Small air-conditioning systems
  • General clean-water transfer
  • Supporting equipment requiring a compact pressure pump
  • Small residential and light-duty commercial water systems

LEO specifically lists clean-water transfer, small domestic water supply, automatic sprinkler systems and small air-conditioning systems among the intended applications for the APSm series.

Product Description for Website

LEO APSM 37AEW Self-Priming Peripheral Pump 0.37kW / 0.5HP is a compact and reliable water pump designed for domestic water supply, pressure boosting, water transfer and small sprinkler applications. Powered by a 0.37 kW / 0.5 HP single-phase motor, the pump delivers up to 40 L/min flow and a maximum head of 35 metres, with a maximum suction lift of 8 metres.

The APSM 37AEW features a cast iron pump body with anti-rust treatment, brass/bronze peripheral impeller, AISI 304 stainless steel shaft and ceramic-graphite-NBR mechanical seal. Its self-priming construction simplifies water transfer from suitable suction sources, while the built-in thermal protector helps protect the single-phase motor from overheating.

With 1" inlet and outlet connections, compact construction and a robust pump assembly, the LEO APSM 37AEW is well suited to residential water systems, small gardens, sprinkler installations, tank transfer and other clean-water pumping applications.



 Inquiry - LEO PERIPHERAL, SELF-PRIMING PERIPEHRAL PUMPS - APSM 37AEW