B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 100CA



The LEO LSWM 100CA is an automatic 1 HP / 0.75 kW sewage submersible pump with a cutting-blade impeller. Unlike conventional wastewater pumps, the CA version incorporates a cutter/shredder mechanism designed to cut fibrous and solid sewage materials before they are discharged. This makes it particularly suitable for sewage containing fibrous matter, domestic wastewater, cesspools, sewage collection wells and heavily contaminated drainage.

LEO's 2026 European brochure identifies the LSWm100CA as a sewage cutter pump rated at 0.75 kW / 230 V, with maximum capacity of 15 m³/h and maximum head of 13 m. Malaysian product listings specify the same model at 0.75 kW / 1 HP, 220 V, 2-inch outlet and 13 m maximum head, with some listings giving the maximum flow as 250 L/min, while another local listing gives 333 L/min. For a catalogue, the more conservative 250 L/min / 15 m³/h figure is preferable.

Product Specifications

Specification Details
Brand LEO
Model LSWM 100CA
Pump Type Sewage Submersible Pump with Cutter
Impeller / Cutting System Cutting Blade / Cutter-Shredder
Motor Power 0.75 kW
Motor Rating 1.0 HP
Voltage 220–230 V
Frequency 50 Hz
Phase Single Phase
Maximum Flow 250 L/min
Maximum Flow Approx. 15 m³/h
Maximum Head 13 m
Discharge Outlet 2" / 50 mm
Automatic Control Float Switch
Motor Winding Copper
Shaft Material AISI 304 Stainless Steel
Pump Body Cast Iron with Anti-Rust Treatment
Pump Shell Stainless Steel
Thermal Protection Built-In
Insulation Class F
Protection Class IPX8
Maximum Liquid Temperature 40°C
Maximum Immersion Depth 5 m
Operation Continuous Duty
Dimensions Approx. 245 × 165 × 416 mm*
Weight Approx. 18 kg*

*Dimensions and weight vary between regional listings; one Malaysian listing specifies 245 × 165 × 416 mm and 18 kg, while another lists 260 × 185 × 405 mm and 14.8 kg. Verify the physical dimensions of the exact unit before publishing packaging/shipping specifications.

1 HP / 0.75 kW Motor

The LSWM100CA is equipped with a 0.75 kW / 1 HP single-phase motor. Malaysian specifications list operation at 220 V / 50 Hz, while LEO's European brochure specifies 230 V for the corresponding model.

The motor uses copper windings and incorporates a built-in thermal protector. The thermal protection helps prevent excessive motor temperature during overload or abnormal operating conditions.

The pump is suitable for installations where single-phase electrical power is available, including residential, commercial, agricultural and light-industrial wastewater systems.

250 L/min Maximum Flow

The LSWM100CA is commonly specified at a maximum flow of 250 L/min, equivalent to approximately 15 m³/h. LEO's 2026 brochure specifically lists the LSWm100CA at 15 m³/h maximum volume.

This capacity makes the pump suitable for rapidly transferring wastewater from:

  • Sewage collection pits
  • Cesspools
  • Septic systems
  • Wastewater tanks
  • Drainage stations
  • Construction-site drainage
  • Industrial wastewater pits
  • Commercial wastewater systems

Actual flow depends on the total system head and pipe resistance.

13-Metre Maximum Head

The LSWM100CA has a published maximum head of 13 metres. This specification is consistent between the LEO brochure and Malaysian product listings.

The pump is therefore suitable for wastewater systems requiring moderate vertical lifting, such as:

  • Basement drainage
  • Sewage pits
  • Septic tanks
  • Wastewater collection tanks
  • Drainage stations
  • Construction drainage
  • Commercial wastewater transfer

The 13 m maximum head is not the operating head at maximum flow. As discharge head increases, available flow decreases.

For proper pump selection:

Total Dynamic Head = Static Lift + Pipe Friction + Fitting Losses + Valve/Check-Valve Losses

2-Inch Discharge Outlet

The LSWM100CA uses a 2-inch / 50 mm discharge connection.

The 2-inch outlet provides a practical discharge size for the pump's flow range while allowing wastewater containing suspended material to be transferred without an excessively small discharge passage.

For best hydraulic performance, the discharge pipe should be correctly sized according to the required flow and total pipe length.

Integrated Cutting-Blade System

The key feature of the LSWM100CA is its cutter/shredder mechanism.

LEO identifies this model specifically as a sewage cutter pump, while Malaysian listings describe it as a pump with a cutting blade impeller.

The cutter is designed to break down sewage containing:

  • Fibrous material
  • Organic solids
  • Sewage debris
  • Soft solid waste
  • Stringy wastewater contaminants
  • Household wastewater solids

This allows the pump to handle sewage applications where a conventional non-cutter pump could be more susceptible to clogging.

The cutter is particularly useful for cesspools, sewage collection wells and wastewater containing fibrous materials.

It should not be interpreted as a guarantee that every type of solid can be safely processed. Hard metallic objects, stones, construction debris and oversized materials can damage the cutting mechanism.

Cutter vs Conventional Sewage Pump

The CA model differs significantly from the ordinary sewage configurations in the LSW range.

Conventional sewage pump:
Wastewater + suspended solids → Pump → Discharge

LSWM100CA cutter pump:
Wastewater + fibrous/solid material → Cutting mechanism → Shredded material → Pump → Discharge

The cutter can therefore be advantageous where the wastewater contains fibrous material that could otherwise wrap around the impeller or obstruct the discharge system.

Automatic Float-Switch Operation

The LSWM100CA is equipped with an automatic float switch for automatic start/stop operation.

The operating sequence is:

Water level rises → Float activates → Pump starts → Water level falls → Float deactivates → Pump stops

This is useful for sewage pits, cesspools, drainage stations and wastewater collection tanks.

The float should have sufficient clearance to move freely. It should not become trapped against the tank wall, pump cable, discharge pipe or other equipment.

AISI 304 Stainless-Steel Shaft

The pump uses an AISI 304 stainless-steel shaft. The shaft, handle and pump-body components are identified as AISI 304 in Malaysian LEO product information.

AISI 304 provides good corrosion resistance in wet and wastewater environments.

This is particularly relevant for a sewage pump because the pump operates in an aggressive and continuously wet environment.

Stainless-Steel Shell and Cast-Iron Pump Body

The LSWM100CA combines a stainless-steel outer shell with a cast-iron pump body featuring special anti-rust treatment.

This construction provides a balance of:

  • Mechanical strength
  • Corrosion resistance
  • Structural durability
  • Resistance to wet operating conditions

The use of treated cast iron for the hydraulic body provides the rigidity required for the pump and cutter assembly.

Copper Motor Winding

The motor uses copper winding.

Copper provides good electrical conductivity and is widely used in pump motors because of its electrical and thermal characteristics.

Combined with the built-in thermal protector and Class F insulation, the motor is designed for reliable operation under the manufacturer's specified conditions.

Built-In Thermal Protection

The LSWM100CA includes a built-in thermal protector.

This helps protect the motor from excessive temperature caused by conditions such as overload.

However, thermal protection should not be considered a substitute for correct electrical protection, appropriate cable sizing or proper pump installation.

Class F Insulation

The motor uses Class F insulation. Both Malaysian product specifications and LEO's broader sewage-pump documentation identify Class F insulation.

Class F insulation provides suitable thermal resistance for the motor winding system.

IPX8 Protection

The LSWM100CA is designed for submerged operation and is specified with IPX8 enclosure protection.

This is appropriate for sewage pits, wastewater tanks and drainage stations where the pump operates underwater.

Electrical connections, grounding and cable joints must still be correctly installed.

Maximum Liquid Temperature: 40°C

The published LSWM100CA specifications give a maximum liquid temperature of 40°C.

The pump is therefore intended primarily for normal-temperature wastewater and sewage applications rather than high-temperature industrial liquids.

Maximum Immersion Depth: 5 Metres

A Malaysian LEO listing specifies a maximum immersion depth of 5 m for the LSWM100CA.

The pump should not be installed beyond the manufacturer's specified maximum immersion depth.

Correct positioning is also important to prevent the pump from drawing excessive sludge, sediment or debris from the bottom of a collection pit.

Applications

LEO identifies the LSWm100CA as a sewage cutter pump for heavy dirty water, sewage and wastewater, while Malaysian listings identify applications including factories, construction sites, commercial facilities, municipal sewage-treatment plants, residential drainage stations, methane pools and field irrigation.

Recommended application areas include:

Residential

  • Septic tanks
  • Cesspools
  • Sewage collection wells
  • Residential drainage stations
  • Basement wastewater

Commercial

  • Commercial buildings
  • Restaurants
  • Hotels
  • Public buildings
  • Wastewater collection tanks

Industrial

  • Factory wastewater
  • Industrial drainage pits
  • Wastewater treatment systems
  • Sewage transfer

Construction

  • Construction-site wastewater
  • Excavation drainage
  • Floodwater removal
  • Temporary sewage pumping

Municipal

  • Sewage-treatment plants
  • Municipal wastewater stations
  • Sewage collection systems

Agricultural

  • Farm wastewater
  • Methane pools
  • Agricultural drainage
  • Field irrigation

The cutter configuration is particularly useful where wastewater contains fibrous or stringy material that could cause clogging in a conventional pump.

Typical Installation

A typical installation can be arranged as:

Sewage / wastewater pit → LEO LSWM100CA cutter pump → 2" discharge pipe → drainage / treatment system

The pump is submerged inside the collection pit and the float switch automatically controls operation.

For permanent installations, a suitable non-return/check valve may be incorporated into the discharge line to reduce reverse flow after the pump stops.

The pump should be positioned securely and should not be allowed to operate in a way that causes the cutter to continuously contact accumulated sediment.

Performance Considerations

The published 250 L/min maximum flow and 13 m maximum head are maximum ratings and should not be treated as simultaneous operating conditions.

Actual performance depends on:

  1. Static lifting height.
  2. Discharge-pipe diameter.
  3. Total pipe length.
  4. Number of bends and fittings.
  5. Check-valve losses.
  6. Wastewater characteristics.
  7. Cutter condition.
  8. Required discharge pressure.

A long or undersized discharge pipe can substantially reduce the actual flow rate.

For engineering selection, match the required Q-H duty point against the manufacturer's pump performance curve.

Main Product Advantages

  1. 1 HP / 0.75 kW motor.
  2. Cutter/shredder mechanism for sewage containing fibrous and solid materials.
  3. 250 L/min maximum flow / approximately 15 m³/h.
  4. 13 m maximum head.
  5. 2-inch / 50 mm discharge outlet.
  6. Automatic float-switch operation.
  7. Copper motor winding.
  8. Built-in thermal protection.
  9. Class F insulation.
  10. IPX8 submersible protection.
  11. AISI 304 stainless-steel shaft.
  12. Stainless-steel outer shell.
  13. Anti-rust-treated cast-iron pump body.
  14. 40°C maximum liquid temperature.
  15. 5 m maximum immersion depth.
  16. Suitable for domestic, commercial, industrial, municipal, construction and agricultural wastewater.
  17. Particularly suitable for sewage containing fibrous material and solids.

Product Details Summary

The LEO LSWM100CA is a 1 HP / 0.75 kW automatic sewage submersible cutter pump designed for pumping and shredding wastewater containing solid and fibrous materials. Operating on 220–230 V single phase, it provides up to 250 L/min (approximately 15 m³/h) with a 13 m maximum head through a 2-inch / 50 mm discharge outlet. Its integrated cutting-blade mechanism helps reduce fibrous and solid sewage material before discharge, making it suitable for cesspools, septic systems, sewage collection wells, wastewater pits and drainage stations. The pump features an automatic float switch, copper-wound motor, built-in thermal protector, Class F insulation, IPX8 protection and AISI 304 stainless-steel shaft, with a stainless-steel shell and treated cast-iron pump body.

SEO Product Title

LEO LSWM100CA Sewage Submersible Cutter Pump 1HP 0.75kW – 250L/min, 13M Head

SEO Product Description

LEO LSWM100CA Sewage Submersible Cutter Pump is an automatic 1HP / 0.75kW wastewater and sewage pump with an integrated cutting-blade mechanism, designed to pump and shred sewage containing fibrous and solid materials. Operating at 220–230V/50Hz single phase, it delivers up to 250L/min (15m³/h) with a maximum head of 13 metres through a 2-inch / 50mm discharge outlet. The pump features automatic float-switch operation, copper motor winding, built-in thermal protection, Class F insulation and IPX8 submersible protection, together with an AISI 304 stainless-steel shaft, stainless-steel shell and anti-rust-treated cast-iron pump body. It is suitable for septic tanks, cesspools, sewage collection wells, residential drainage stations, factories, construction sites, commercial facilities, municipal sewage-treatment systems and agricultural wastewater applications.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 100CA