B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO STAINLESS STEEL SUBMERSIBLE - XQS 39-8/0.75I



LEO XQS39-8/0.75I is a 1 HP stainless-steel submersible drainage pump designed for high-volume water transfer, irrigation, drainage and general water-supply applications. LEO specifies the XQS series for urban well-water pumping, field and garden irrigation, household water supply, construction drainage and accumulated industrial water.

LEO STAINLESS STEEL SUBMERSIBLE PUMP – XQS39-8/0.75I

Product Description

The LEO XQS39-8/0.75I is a compact, high-flow submersible pump powered by a 0.75 kW (1 HP) single-phase motor. It is designed for applications requiring rapid drainage and water transfer, delivering a maximum flow rate of 650 L/min (39 m³/h) with a maximum head of 8 metres. The pump operates on 220 V, 50 Hz electrical supply and is suitable for continuous submersible operation within its specified operating limits.

The pump incorporates a copper motor winding, stainless-steel welded shaft, built-in thermal protector, Class B insulation and IP68 protection, providing protection for the motor during submerged operation. LEO specifies a maximum immersion depth of 5 metres, maximum liquid temperature of 40°C, and allowable liquid pH range of 6.5–8.

The XQS39-8/0.75I is particularly suitable where high water volume and relatively low delivery head are required, such as construction-site drainage, agricultural irrigation, garden drainage, basement/sump drainage and transferring accumulated water.

Key Features

  • Brand: LEO
  • Series: XQS Stainless Steel Submersible Pump
  • Model: XQS39-8/0.75I
  • Motor Power: 0.75 kW / 1 HP
  • Power Supply: 220 V
  • Frequency: 50 Hz
  • Phase: Single Phase
  • Maximum Flow Rate: 650 L/min
  • Maximum Flow: Approximately 39 m³/h
  • Maximum Head: 8 m
  • Maximum Immersion Depth: 5 m
  • Maximum Liquid Temperature: 40°C
  • Permitted Liquid pH: 6.5–8
  • Motor Protection: IP68
  • Insulation Class: B
  • Motor Winding: Copper
  • Shaft: Stainless-steel welded shaft
  • Mechanical Seal: Carbon/Ceramic
  • Impeller: HT200 cast iron
  • Pump Body: HT200 cast iron
  • Outlet: Approximately 2½-inch class outlet configuration
  • Built-in Thermal Protection: Yes
  • Float Switch: Available/configured for the listed XQS39-8/0.75I version in Malaysian retail listings.

Technical Specifications

Specification XQS39-8/0.75I
Model XQS39-8/0.75I
Pump Type Stainless Steel Submersible Pump
Application Drainage / Irrigation / Water Transfer
Motor Power 0.75 kW / 1 HP
Voltage 220 V
Frequency 50 Hz
Motor Phase Single Phase
Max. Flow 650 L/min
Max. Flow Approx. 39 m³/h
Max. Head 8 m
Max. Immersion 5 m
Max. Liquid Temperature +40°C
Liquid pH Range 6.5–8
Protection Class IP68
Insulation Class B
Shaft Material Stainless Steel
Motor Winding Copper
Mechanical Seal Carbon / Ceramic
Impeller Material HT200
Pump Body Material HT200 Cast Iron
Gross Weight Approx. 21.6 kg
Packing Dimensions Approx. 580 × 320 × 250 mm

The published LEO technical data lists the XQS39-8/0.75I at 650 L/min maximum flow, 8 m maximum head, 21.6 kg gross weight and 580 × 320 × 250 mm packing dimensions.

Motor & Construction

Copper Winding Motor: The motor uses copper windings for reliable electrical performance and heat dissipation.

Stainless-Steel Shaft: The welded stainless-steel shaft provides corrosion resistance and structural durability in submerged applications.

Built-in Thermal Protector: The motor incorporates thermal protection to help protect the winding against excessive temperature.

IP68 Protection: The IP68-rated motor enclosure is designed for submerged operation within the specified 5 m maximum immersion depth.

Carbon/Ceramic Mechanical Seal: The mechanical seal arrangement provides separation between the pumped liquid and motor section and is specified as carbon/ceramic for this model.

HT200 Impeller and Pump Body: The hydraulic components use HT200 cast iron, providing a robust construction suitable for general drainage and water-transfer duties.

Applications

The LEO XQS39-8/0.75I can be used for:

  • Construction-site water drainage
  • Basement and sump drainage
  • Agricultural irrigation
  • Garden irrigation
  • Water transfer
  • Drainage of accumulated rainwater
  • Industrial accumulated-water drainage
  • Residential water supply and drainage
  • Livestock and agricultural facilities
  • General clean-water pumping
  • Urban well-water pumping
  • Temporary dewatering operations

LEO specifically identifies the XQS range for irrigation, drainage, household water supply, construction, livestock breeding and accumulated industrial water applications.

Performance

The 39 m³/h maximum flow is the main strength of this model. With a maximum head of only 8 m, it is best suited to high-volume, low-head drainage and transfer duties rather than high-pressure water boosting.

For example, it is appropriate when the priority is moving a large quantity of water from a sump, pit, construction area, tank or low-lying area to a nearby discharge point. Actual flow will decrease as the required discharge head and system resistance increase, so the maximum 650 L/min figure should not be interpreted as the flow available at 8 m head. The pump's hydraulic performance curve should be used when selecting the pump for a specific installation.

Product Advantages

  1. High-volume water transfer – Maximum capacity of 650 L/min makes the pump suitable for rapid drainage.
  2. 1 HP single-phase motor – Practical for applications where a 220 V electrical supply is available.
  3. IP68 protection – Designed for submerged operation.
  4. Thermal protection – Helps protect the motor from overheating.
  5. Stainless-steel shaft – Provides durability and corrosion resistance.
  6. Carbon/ceramic mechanical seal – Provides reliable separation of the motor and pumped liquid.
  7. Compact submersible design – The pump can be positioned directly inside the water source or sump.
  8. Wide application range – Suitable for irrigation, drainage, construction and general water-transfer applications.
  9. Float-switch configuration – Malaysian listings identify the XQS39-8/0.75I version with a float, providing automatic level-control capability where correctly installed.

SEO Product Title

LEO XQS39-8/0.75I 1HP Stainless Steel Submersible Drainage Pump 220V High Flow 650L/Min

SEO Product Description

LEO XQS39-8/0.75I 1HP Stainless Steel Submersible Pump is a high-flow drainage and water-transfer pump designed for irrigation, construction-site drainage, sump pumping, garden drainage and general water-transfer applications. Powered by a 0.75 kW (1 HP) 220 V single-phase motor, it delivers up to 650 L/min (39 m³/h) with a maximum head of 8 m. The pump features a copper winding motor, stainless-steel welded shaft, built-in thermal protection, Class B insulation and IP68 protection for reliable submerged operation up to 5 m. With durable HT200 construction and a carbon/ceramic mechanical seal, the LEO XQS39-8/0.75I provides a practical solution for high-volume, low-head drainage and water-transfer requirements.



 Inquiry - LEO STAINLESS STEEL SUBMERSIBLE - XQS 39-8/0.75I