The LEO XKF-55P is a 55 W submersible fountain pump designed for decorative fountains, garden ponds, water features, pond circulation, filtration and water oxygen enrichment. It delivers a maximum flow of 2,300 L/h (approximately 38.3 L/min) and a maximum head of 2.3 m. The pump operates on 220–240 V, 50 Hz, uses a 19 mm outlet, and is supplied with a 10 m H05RN-F power cable.
Product Description
The LEO XKF-55P is a compact, fully submersible fountain pump designed to circulate water and create decorative fountain effects. Its 55 W motor provides substantially greater flow and lifting capability than the XKF-15P and XKF-35P, making it suitable for somewhat larger garden ponds, decorative fountains and small watercourses.
The XKF-55P can deliver up to 2,300 litres per hour, while its maximum head is 2.3 metres. This makes it primarily a low-head, high-circulation fountain pump, rather than a high-pressure water-transfer pump.
LEO describes the XKF series for pond-water filtration, decorative pond ornamentation and oxygen enrichment. The series also supports various fountain nozzle configurations for creating different water-display effects.
Key Specifications
| Specification | LEO XKF-55P |
|---|---|
| Brand | LEO |
| Model | XKF-55P |
| Product Type | Submersible Fountain Pump |
| Application | Fountain / Pond / Water Feature |
| Input Power | 55 W |
| Voltage | 220–240 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Maximum Flow | 2,300 L/h |
| Maximum Flow | Approx. 38.3 L/min |
| Maximum Head | 2.3 m |
| Outlet | 19 mm |
| Cable | H05RN-F |
| Cable Length | 10 m |
| Pump Casing | Plastic / Engineering Plastic |
| Installation | Fully Submersible |
| Maximum Immersion Depth | Up to 3 m |
| Maximum Fluid Temperature | 35°C |
| Maximum Ambient Temperature | 40°C |
| Protection | IPX8 |
| Suitable Liquid | Clean Water |
| Fountain Nozzles | Multiple configurations available |
LEO's official XKF technical table specifies 55 W input power, 2.3 m maximum head, 2,300 L/h maximum flow, 19 mm outlet and 10 m H05RN-F cable.
Pump Performance
The XKF-55P is designed to provide a useful combination of water circulation and fountain height while maintaining low electrical consumption.
Its maximum performance ratings are:
- Maximum flow: 2,300 L/h
- Maximum flow: approximately 38.3 L/min
- Maximum head: 2.3 m
- Power consumption: 55 W
- Outlet: 19 mm
The 2,300 L/h rating represents maximum flow under favourable hydraulic conditions. It does not mean the pump will deliver 2,300 L/h at the full 2.3 m head. Actual flow decreases as fountain height, hose length, nozzle restriction, bends and other hydraulic resistance increase.
Therefore, for fountain design, the pump should be selected based on the required water height and discharge pattern, rather than maximum flow alone.
Fountain Applications
The LEO XKF-55P is suitable for:
- Garden fountains
- Decorative ponds
- Ornamental water features
- Small waterfalls
- Small artificial streams
- Pond circulation
- Pond filtration
- Water oxygen enrichment
- Fountain basins
- Garden water displays
- Small aquarium or ornamental water installations
LEO specifically identifies the XKF series for pond filtration, decorative pond applications and oxygen enrichment of pond water.
Fountain Nozzles & Water Effects
The XKF series is designed to work with different fountain nozzles to create decorative water patterns.
Common nozzle effects include:
Cascade: Produces a wider, cascading sheet of water and is suitable for decorative ponds and small waterfalls.
Water Bell: Creates a bell-shaped water pattern around the nozzle.
Foaming Jet: Produces a more aerated and turbulent fountain effect.
Water Lily: Creates a flower-like decorative spray pattern.
Pelunica: Produces another ornamental spray configuration.
LEO's catalogue indicates Cascade and Water Bell as standard nozzle options, while Foaming Jet, Water Lily and Pelunica can be available on request depending on the product configuration.
Some XKF-55P market listings also specify multiple fountain nozzles supplied with the pump. The exact nozzle package can vary by distributor and market, so the supplied accessories should be checked against the actual product package.
Construction
Engineering Plastic Pump Body
The XKF-55P uses a lightweight plastic/engineering-plastic casing. This makes the pump easy to position inside a fountain basin or pond and provides good resistance to normal water exposure. LEO describes the XKF series as small, lightweight, durable and reliable.
Compact Submersible Design
The pump is installed directly underwater. This eliminates the need for a conventional suction pipe and allows the pump to be positioned close to the fountain outlet or decorative nozzle.
19 mm Outlet
The XKF-55P uses a 19 mm discharge outlet, matching the larger hydraulic capacity of the 55 W model.
10 m Cable
The pump comes with a 10 m H05RN-F cable, providing useful installation distance for garden ponds and outdoor decorative fountains.
Motor & Protection
The XKF-55P is designed specifically for submerged fountain operation. Published specifications identify IPX8 protection, making it suitable for complete immersion under the manufacturer's specified operating conditions.
The pump should always be operated fully submerged according to the manufacturer's instructions and should not be allowed to run dry for extended periods.
Operating Conditions
LEO specifies:
- Maximum fluid temperature: 35°C
- Maximum ambient temperature: 40°C
- Suitable liquid: Clean water
- Installation: Submerged
- Maximum immersion depth: approximately 3 m
- Maximum head: 2.3 m
- Protection: IPX8
The XKF-55P is intended for clean-water fountain and pond applications. It should not be used as a sewage pump or for liquids containing large amounts of sludge, abrasive particles, fibrous material or other contaminants.
Recommended Applications
1. Garden Fountains
The 55 W motor provides enough circulation capacity for larger decorative fountain installations than the smaller XKF models.
2. Decorative Ponds
The pump continuously circulates pond water and can be connected to a fountain nozzle or suitable water-return system.
3. Small Waterfalls
The 2.3 m maximum head allows the pump to support low-height waterfall and cascade installations, provided actual system resistance remains within the pump's capacity.
4. Pond Filtration
The pump can circulate water through a suitable filtration system, subject to the filtration system's required flow and pressure.
5. Oxygen Enrichment
Moving and splashing water increases the water-to-air contact area, helping oxygen exchange within the pond.
6. Ornamental Water Features
Its compact size and 19 mm outlet make it suitable for garden water displays, artificial streams and decorative basins.
Advantages
- 55 W low-power motor
- Maximum flow of 2,300 L/h
- Approximately 38.3 L/min maximum flow
- Maximum head of 2.3 m
- 19 mm outlet
- 10 m H05RN-F cable
- Fully submersible design
- IPX8 protection
- Lightweight plastic construction
- Suitable for continuous water circulation
- Multiple fountain nozzle options
- Suitable for decorative ponds
- Suitable for garden fountains
- Suitable for pond filtration
- Helps promote pond oxygen enrichment
- Low electrical consumption
- Suitable for indoor and outdoor decorative water installations
XKF Series Comparison
| Model | Power | Max. Head | Max. Flow | Outlet | Cable |
|---|---|---|---|---|---|
| XKF-15P | 15 W | 1.0 m | 850 L/h | 13 mm | 10 m |
| XKF-35P | 35 W | 1.4 m | 1,600 L/h | 19 mm | 10 m |
| XKF-55P | 55 W | 2.3 m | 2,300 L/h | 19 mm | 10 m |
| XKF-75P | 75 W | 2.7 m | 2,650 L/h | 19 mm | 10 m |
| XKF-95P | 95 W | 3.0 m | 3,500 L/h | 19 mm | 10 m |
| XKF-110P | 110 W | 3.7 m | 3,750 L/h | 19 mm | 10 m |
The XKF-55P represents a significant step up from the XKF-35P, increasing maximum flow from 1,600 L/h to 2,300 L/h and maximum head from 1.4 m to 2.3 m. The outlet remains 19 mm and the cable remains 10 m.
XKF-55P vs XKF-35P
| Feature | XKF-35P | XKF-55P |
|---|---|---|
| Power | 35 W | 55 W |
| Maximum Flow | 1,600 L/h | 2,300 L/h |
| Maximum Head | 1.4 m | 2.3 m |
| Outlet | 19 mm | 19 mm |
| Cable | 10 m | 10 m |
| Best Application | Small fountain | Larger fountain / pond circulation |
The XKF-55P is the better choice when the installation requires more water volume or greater fountain height than the XKF-35P can provide.
Important Selection Note
The XKF-55P is a fountain and pond-circulation pump, not a general-purpose drainage pump. Its 2.3 m maximum head is intended for decorative fountain and low-head water circulation applications.
When designing the fountain, account for losses caused by:
- Hose length
- Hose diameter
- Elbows and fittings
- Nozzle restriction
- Elevation
- Filters
- Valves
The actual fountain flow will be lower than the 2,300 L/h maximum when these restrictions are present. If a fountain is expected to operate near the full 2.3 m head, the available water flow will be considerably lower than the maximum-flow rating.
Technical Product Data
Brand: LEO
Model: XKF-55P
Category: Fountain Pump
Pump Type: Submersible Fountain Pump
Input Power: 55 W
Voltage: 220–240 V
Frequency: 50 Hz
Phase: Single Phase
Maximum Flow: 2,300 L/h
Maximum Flow: Approx. 38.3 L/min
Maximum Head: 2.3 m
Outlet: 19 mm
Cable: H05RN-F
Cable Length: 10 m
Pump Casing: Plastic / Engineering Plastic
Protection: IPX8
Maximum Immersion: Approx. 3 m
Maximum Fluid Temperature: 35°C
Maximum Ambient Temperature: 40°C
Suitable Liquid: Clean Water
Installation: Fully Submersible
Applications: Fountains, ponds, water features, filtration and oxygen enrichment
Nozzle Options: Cascade, Water Bell, Foaming Jet, Water Lily and Pelunica, depending on configuration.
The LEO XKF-55P is a 55 W submersible fountain pump designed for decorative fountains, garden ponds, water features, pond circulation, filtration and water oxygen enrichment. It delivers a maximum flow of 2,300 L/h (approximately 38.3 L/min) and a maximum head of 2.3 m. The pump operates on 220–240 V, 50 Hz, uses a 19 mm outlet, and is supplied with a 10 m H05RN-F power cable.
Product Description
The LEO XKF-55P is a compact, fully submersible fountain pump designed to circulate water and create decorative fountain effects. Its 55 W motor provides substantially greater flow and lifting capability than the XKF-15P and XKF-35P, making it suitable for somewhat larger garden ponds, decorative fountains and small watercourses.
The XKF-55P can deliver up to 2,300 litres per hour, while its maximum head is 2.3 metres. This makes it primarily a low-head, high-circulation fountain pump, rather than a high-pressure water-transfer pump.
LEO describes the XKF series for pond-water filtration, decorative pond ornamentation and oxygen enrichment. The series also supports various fountain nozzle configurations for creating different water-display effects.
Key Specifications
| Specification | LEO XKF-55P |
|---|---|
| Brand | LEO |
| Model | XKF-55P |
| Product Type | Submersible Fountain Pump |
| Application | Fountain / Pond / Water Feature |
| Input Power | 55 W |
| Voltage | 220–240 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Maximum Flow | 2,300 L/h |
| Maximum Flow | Approx. 38.3 L/min |
| Maximum Head | 2.3 m |
| Outlet | 19 mm |
| Cable | H05RN-F |
| Cable Length | 10 m |
| Pump Casing | Plastic / Engineering Plastic |
| Installation | Fully Submersible |
| Maximum Immersion Depth | Up to 3 m |
| Maximum Fluid Temperature | 35°C |
| Maximum Ambient Temperature | 40°C |
| Protection | IPX8 |
| Suitable Liquid | Clean Water |
| Fountain Nozzles | Multiple configurations available |
LEO's official XKF technical table specifies 55 W input power, 2.3 m maximum head, 2,300 L/h maximum flow, 19 mm outlet and 10 m H05RN-F cable.
Pump Performance
The XKF-55P is designed to provide a useful combination of water circulation and fountain height while maintaining low electrical consumption.
Its maximum performance ratings are:
- Maximum flow: 2,300 L/h
- Maximum flow: approximately 38.3 L/min
- Maximum head: 2.3 m
- Power consumption: 55 W
- Outlet: 19 mm
The 2,300 L/h rating represents maximum flow under favourable hydraulic conditions. It does not mean the pump will deliver 2,300 L/h at the full 2.3 m head. Actual flow decreases as fountain height, hose length, nozzle restriction, bends and other hydraulic resistance increase.
Therefore, for fountain design, the pump should be selected based on the required water height and discharge pattern, rather than maximum flow alone.
Fountain Applications
The LEO XKF-55P is suitable for:
- Garden fountains
- Decorative ponds
- Ornamental water features
- Small waterfalls
- Small artificial streams
- Pond circulation
- Pond filtration
- Water oxygen enrichment
- Fountain basins
- Garden water displays
- Small aquarium or ornamental water installations
LEO specifically identifies the XKF series for pond filtration, decorative pond applications and oxygen enrichment of pond water.
Fountain Nozzles & Water Effects
The XKF series is designed to work with different fountain nozzles to create decorative water patterns.
Common nozzle effects include:
Cascade: Produces a wider, cascading sheet of water and is suitable for decorative ponds and small waterfalls.
Water Bell: Creates a bell-shaped water pattern around the nozzle.
Foaming Jet: Produces a more aerated and turbulent fountain effect.
Water Lily: Creates a flower-like decorative spray pattern.
Pelunica: Produces another ornamental spray configuration.
LEO's catalogue indicates Cascade and Water Bell as standard nozzle options, while Foaming Jet, Water Lily and Pelunica can be available on request depending on the product configuration.
Some XKF-55P market listings also specify multiple fountain nozzles supplied with the pump. The exact nozzle package can vary by distributor and market, so the supplied accessories should be checked against the actual product package.
Construction
Engineering Plastic Pump Body
The XKF-55P uses a lightweight plastic/engineering-plastic casing. This makes the pump easy to position inside a fountain basin or pond and provides good resistance to normal water exposure. LEO describes the XKF series as small, lightweight, durable and reliable.
Compact Submersible Design
The pump is installed directly underwater. This eliminates the need for a conventional suction pipe and allows the pump to be positioned close to the fountain outlet or decorative nozzle.
19 mm Outlet
The XKF-55P uses a 19 mm discharge outlet, matching the larger hydraulic capacity of the 55 W model.
10 m Cable
The pump comes with a 10 m H05RN-F cable, providing useful installation distance for garden ponds and outdoor decorative fountains.
Motor & Protection
The XKF-55P is designed specifically for submerged fountain operation. Published specifications identify IPX8 protection, making it suitable for complete immersion under the manufacturer's specified operating conditions.
The pump should always be operated fully submerged according to the manufacturer's instructions and should not be allowed to run dry for extended periods.
Operating Conditions
LEO specifies:
- Maximum fluid temperature: 35°C
- Maximum ambient temperature: 40°C
- Suitable liquid: Clean water
- Installation: Submerged
- Maximum immersion depth: approximately 3 m
- Maximum head: 2.3 m
- Protection: IPX8
The XKF-55P is intended for clean-water fountain and pond applications. It should not be used as a sewage pump or for liquids containing large amounts of sludge, abrasive particles, fibrous material or other contaminants.
Recommended Applications
1. Garden Fountains
The 55 W motor provides enough circulation capacity for larger decorative fountain installations than the smaller XKF models.
2. Decorative Ponds
The pump continuously circulates pond water and can be connected to a fountain nozzle or suitable water-return system.
3. Small Waterfalls
The 2.3 m maximum head allows the pump to support low-height waterfall and cascade installations, provided actual system resistance remains within the pump's capacity.
4. Pond Filtration
The pump can circulate water through a suitable filtration system, subject to the filtration system's required flow and pressure.
5. Oxygen Enrichment
Moving and splashing water increases the water-to-air contact area, helping oxygen exchange within the pond.
6. Ornamental Water Features
Its compact size and 19 mm outlet make it suitable for garden water displays, artificial streams and decorative basins.
Advantages
- 55 W low-power motor
- Maximum flow of 2,300 L/h
- Approximately 38.3 L/min maximum flow
- Maximum head of 2.3 m
- 19 mm outlet
- 10 m H05RN-F cable
- Fully submersible design
- IPX8 protection
- Lightweight plastic construction
- Suitable for continuous water circulation
- Multiple fountain nozzle options
- Suitable for decorative ponds
- Suitable for garden fountains
- Suitable for pond filtration
- Helps promote pond oxygen enrichment
- Low electrical consumption
- Suitable for indoor and outdoor decorative water installations
XKF Series Comparison
| Model | Power | Max. Head | Max. Flow | Outlet | Cable |
|---|---|---|---|---|---|
| XKF-15P | 15 W | 1.0 m | 850 L/h | 13 mm | 10 m |
| XKF-35P | 35 W | 1.4 m | 1,600 L/h | 19 mm | 10 m |
| XKF-55P | 55 W | 2.3 m | 2,300 L/h | 19 mm | 10 m |
| XKF-75P | 75 W | 2.7 m | 2,650 L/h | 19 mm | 10 m |
| XKF-95P | 95 W | 3.0 m | 3,500 L/h | 19 mm | 10 m |
| XKF-110P | 110 W | 3.7 m | 3,750 L/h | 19 mm | 10 m |
The XKF-55P represents a significant step up from the XKF-35P, increasing maximum flow from 1,600 L/h to 2,300 L/h and maximum head from 1.4 m to 2.3 m. The outlet remains 19 mm and the cable remains 10 m.
XKF-55P vs XKF-35P
| Feature | XKF-35P | XKF-55P |
|---|---|---|
| Power | 35 W | 55 W |
| Maximum Flow | 1,600 L/h | 2,300 L/h |
| Maximum Head | 1.4 m | 2.3 m |
| Outlet | 19 mm | 19 mm |
| Cable | 10 m | 10 m |
| Best Application | Small fountain | Larger fountain / pond circulation |
The XKF-55P is the better choice when the installation requires more water volume or greater fountain height than the XKF-35P can provide.
Important Selection Note
The XKF-55P is a fountain and pond-circulation pump, not a general-purpose drainage pump. Its 2.3 m maximum head is intended for decorative fountain and low-head water circulation applications.
When designing the fountain, account for losses caused by:
- Hose length
- Hose diameter
- Elbows and fittings
- Nozzle restriction
- Elevation
- Filters
- Valves
The actual fountain flow will be lower than the 2,300 L/h maximum when these restrictions are present. If a fountain is expected to operate near the full 2.3 m head, the available water flow will be considerably lower than the maximum-flow rating.
Technical Product Data
Brand: LEO
Model: XKF-55P
Category: Fountain Pump
Pump Type: Submersible Fountain Pump
Input Power: 55 W
Voltage: 220–240 V
Frequency: 50 Hz
Phase: Single Phase
Maximum Flow: 2,300 L/h
Maximum Flow: Approx. 38.3 L/min
Maximum Head: 2.3 m
Outlet: 19 mm
Cable: H05RN-F
Cable Length: 10 m
Pump Casing: Plastic / Engineering Plastic
Protection: IPX8
Maximum Immersion: Approx. 3 m
Maximum Fluid Temperature: 35°C
Maximum Ambient Temperature: 40°C
Suitable Liquid: Clean Water
Installation: Fully Submersible
Applications: Fountains, ponds, water features, filtration and oxygen enrichment
Nozzle Options: Cascade, Water Bell, Foaming Jet, Water Lily and Pelunica, depending on configuration.
The LEO XKF-55P is a 55 W submersible fountain pump designed for decorative fountains, garden ponds, water features, pond circulation, filtration and water oxygen enrichment. It delivers a maximum flow of 2,300 L/h (approximately 38.3 L/min) and a maximum head of 2.3 m. The pump operates on 220–240 V, 50 Hz, uses a 19 mm outlet, and is supplied with a 10 m H05RN-F power cable.
Product Description
The LEO XKF-55P is a compact, fully submersible fountain pump designed to circulate water and create decorative fountain effects. Its 55 W motor provides substantially greater flow and lifting capability than the XKF-15P and XKF-35P, making it suitable for somewhat larger garden ponds, decorative fountains and small watercourses.
The XKF-55P can deliver up to 2,300 litres per hour, while its maximum head is 2.3 metres. This makes it primarily a low-head, high-circulation fountain pump, rather than a high-pressure water-transfer pump.
LEO describes the XKF series for pond-water filtration, decorative pond ornamentation and oxygen enrichment. The series also supports various fountain nozzle configurations for creating different water-display effects.
Key Specifications
| Specification | LEO XKF-55P |
|---|---|
| Brand | LEO |
| Model | XKF-55P |
| Product Type | Submersible Fountain Pump |
| Application | Fountain / Pond / Water Feature |
| Input Power | 55 W |
| Voltage | 220–240 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Maximum Flow | 2,300 L/h |
| Maximum Flow | Approx. 38.3 L/min |
| Maximum Head | 2.3 m |
| Outlet | 19 mm |
| Cable | H05RN-F |
| Cable Length | 10 m |
| Pump Casing | Plastic / Engineering Plastic |
| Installation | Fully Submersible |
| Maximum Immersion Depth | Up to 3 m |
| Maximum Fluid Temperature | 35°C |
| Maximum Ambient Temperature | 40°C |
| Protection | IPX8 |
| Suitable Liquid | Clean Water |
| Fountain Nozzles | Multiple configurations available |
LEO's official XKF technical table specifies 55 W input power, 2.3 m maximum head, 2,300 L/h maximum flow, 19 mm outlet and 10 m H05RN-F cable.
Pump Performance
The XKF-55P is designed to provide a useful combination of water circulation and fountain height while maintaining low electrical consumption.
Its maximum performance ratings are:
- Maximum flow: 2,300 L/h
- Maximum flow: approximately 38.3 L/min
- Maximum head: 2.3 m
- Power consumption: 55 W
- Outlet: 19 mm
The 2,300 L/h rating represents maximum flow under favourable hydraulic conditions. It does not mean the pump will deliver 2,300 L/h at the full 2.3 m head. Actual flow decreases as fountain height, hose length, nozzle restriction, bends and other hydraulic resistance increase.
Therefore, for fountain design, the pump should be selected based on the required water height and discharge pattern, rather than maximum flow alone.
Fountain Applications
The LEO XKF-55P is suitable for:
- Garden fountains
- Decorative ponds
- Ornamental water features
- Small waterfalls
- Small artificial streams
- Pond circulation
- Pond filtration
- Water oxygen enrichment
- Fountain basins
- Garden water displays
- Small aquarium or ornamental water installations
LEO specifically identifies the XKF series for pond filtration, decorative pond applications and oxygen enrichment of pond water.
Fountain Nozzles & Water Effects
The XKF series is designed to work with different fountain nozzles to create decorative water patterns.
Common nozzle effects include:
Cascade: Produces a wider, cascading sheet of water and is suitable for decorative ponds and small waterfalls.
Water Bell: Creates a bell-shaped water pattern around the nozzle.
Foaming Jet: Produces a more aerated and turbulent fountain effect.
Water Lily: Creates a flower-like decorative spray pattern.
Pelunica: Produces another ornamental spray configuration.
LEO's catalogue indicates Cascade and Water Bell as standard nozzle options, while Foaming Jet, Water Lily and Pelunica can be available on request depending on the product configuration.
Some XKF-55P market listings also specify multiple fountain nozzles supplied with the pump. The exact nozzle package can vary by distributor and market, so the supplied accessories should be checked against the actual product package.
Construction
Engineering Plastic Pump Body
The XKF-55P uses a lightweight plastic/engineering-plastic casing. This makes the pump easy to position inside a fountain basin or pond and provides good resistance to normal water exposure. LEO describes the XKF series as small, lightweight, durable and reliable.
Compact Submersible Design
The pump is installed directly underwater. This eliminates the need for a conventional suction pipe and allows the pump to be positioned close to the fountain outlet or decorative nozzle.
19 mm Outlet
The XKF-55P uses a 19 mm discharge outlet, matching the larger hydraulic capacity of the 55 W model.
10 m Cable
The pump comes with a 10 m H05RN-F cable, providing useful installation distance for garden ponds and outdoor decorative fountains.
Motor & Protection
The XKF-55P is designed specifically for submerged fountain operation. Published specifications identify IPX8 protection, making it suitable for complete immersion under the manufacturer's specified operating conditions.
The pump should always be operated fully submerged according to the manufacturer's instructions and should not be allowed to run dry for extended periods.
Operating Conditions
LEO specifies:
- Maximum fluid temperature: 35°C
- Maximum ambient temperature: 40°C
- Suitable liquid: Clean water
- Installation: Submerged
- Maximum immersion depth: approximately 3 m
- Maximum head: 2.3 m
- Protection: IPX8
The XKF-55P is intended for clean-water fountain and pond applications. It should not be used as a sewage pump or for liquids containing large amounts of sludge, abrasive particles, fibrous material or other contaminants.
Recommended Applications
1. Garden Fountains
The 55 W motor provides enough circulation capacity for larger decorative fountain installations than the smaller XKF models.
2. Decorative Ponds
The pump continuously circulates pond water and can be connected to a fountain nozzle or suitable water-return system.
3. Small Waterfalls
The 2.3 m maximum head allows the pump to support low-height waterfall and cascade installations, provided actual system resistance remains within the pump's capacity.
4. Pond Filtration
The pump can circulate water through a suitable filtration system, subject to the filtration system's required flow and pressure.
5. Oxygen Enrichment
Moving and splashing water increases the water-to-air contact area, helping oxygen exchange within the pond.
6. Ornamental Water Features
Its compact size and 19 mm outlet make it suitable for garden water displays, artificial streams and decorative basins.
Advantages
- 55 W low-power motor
- Maximum flow of 2,300 L/h
- Approximately 38.3 L/min maximum flow
- Maximum head of 2.3 m
- 19 mm outlet
- 10 m H05RN-F cable
- Fully submersible design
- IPX8 protection
- Lightweight plastic construction
- Suitable for continuous water circulation
- Multiple fountain nozzle options
- Suitable for decorative ponds
- Suitable for garden fountains
- Suitable for pond filtration
- Helps promote pond oxygen enrichment
- Low electrical consumption
- Suitable for indoor and outdoor decorative water installations
XKF Series Comparison
| Model | Power | Max. Head | Max. Flow | Outlet | Cable |
|---|---|---|---|---|---|
| XKF-15P | 15 W | 1.0 m | 850 L/h | 13 mm | 10 m |
| XKF-35P | 35 W | 1.4 m | 1,600 L/h | 19 mm | 10 m |
| XKF-55P | 55 W | 2.3 m | 2,300 L/h | 19 mm | 10 m |
| XKF-75P | 75 W | 2.7 m | 2,650 L/h | 19 mm | 10 m |
| XKF-95P | 95 W | 3.0 m | 3,500 L/h | 19 mm | 10 m |
| XKF-110P | 110 W | 3.7 m | 3,750 L/h | 19 mm | 10 m |
The XKF-55P represents a significant step up from the XKF-35P, increasing maximum flow from 1,600 L/h to 2,300 L/h and maximum head from 1.4 m to 2.3 m. The outlet remains 19 mm and the cable remains 10 m.
XKF-55P vs XKF-35P
| Feature | XKF-35P | XKF-55P |
|---|---|---|
| Power | 35 W | 55 W |
| Maximum Flow | 1,600 L/h | 2,300 L/h |
| Maximum Head | 1.4 m | 2.3 m |
| Outlet | 19 mm | 19 mm |
| Cable | 10 m | 10 m |
| Best Application | Small fountain | Larger fountain / pond circulation |
The XKF-55P is the better choice when the installation requires more water volume or greater fountain height than the XKF-35P can provide.
Important Selection Note
The XKF-55P is a fountain and pond-circulation pump, not a general-purpose drainage pump. Its 2.3 m maximum head is intended for decorative fountain and low-head water circulation applications.
When designing the fountain, account for losses caused by:
- Hose length
- Hose diameter
- Elbows and fittings
- Nozzle restriction
- Elevation
- Filters
- Valves
The actual fountain flow will be lower than the 2,300 L/h maximum when these restrictions are present. If a fountain is expected to operate near the full 2.3 m head, the available water flow will be considerably lower than the maximum-flow rating.
Technical Product Data
Brand: LEO
Model: XKF-55P
Category: Fountain Pump
Pump Type: Submersible Fountain Pump
Input Power: 55 W
Voltage: 220–240 V
Frequency: 50 Hz
Phase: Single Phase
Maximum Flow: 2,300 L/h
Maximum Flow: Approx. 38.3 L/min
Maximum Head: 2.3 m
Outlet: 19 mm
Cable: H05RN-F
Cable Length: 10 m
Pump Casing: Plastic / Engineering Plastic
Protection: IPX8
Maximum Immersion: Approx. 3 m
Maximum Fluid Temperature: 35°C
Maximum Ambient Temperature: 40°C
Suitable Liquid: Clean Water
Installation: Fully Submersible
Applications: Fountains, ponds, water features, filtration and oxygen enrichment
Nozzle Options: Cascade, Water Bell, Foaming Jet, Water Lily and Pelunica, depending on configuration
SEO Product Description
LEO XKF-55P 55W Submersible Fountain Pump is a compact and energy-efficient pump designed for decorative fountains, garden ponds, artificial water features, pond circulation, filtration and water oxygen enrichment. Operating on 220–240V, 50Hz, the XKF-55P consumes 55W and delivers a maximum flow of 2,300L/H (approximately 38.3L/min) with a maximum head of 2.3 metres. It features a lightweight plastic construction, 19mm outlet and 10-metre H05RN-F power cable, together with IPX8 protection for submerged operation. The pump supports various fountain nozzle configurations for decorative effects such as cascade and water-bell displays. With its combination of higher flow, increased head, low power consumption and compact submersible design, the LEO XKF-55P is suitable for garden fountains, decorative ponds, small waterfalls, water features and pond circulation systems
Inquiry - LEO FOUNTAIN PUMPS - XKF-55P