The LEO XKP-804E is a 0.8 kW / 1.1 HP self-priming swimming pool and spa circulation pump designed primarily for water circulation and filtration in small to medium-sized swimming pools. It features a high-flow hydraulic design, integrated filtration/pre-filter system, engineering-plastic pump body, AISI 304 stainless-steel shaft, built-in thermal protection and IPX5 motor protection.
The XKP-804E operates on 220 V, 50 Hz single-phase power, with a published performance range of 25–290 L/min and 11–2 m head. It has 2-inch suction and discharge connections and a maximum suction height of approximately 3.5 m.
Product Description
The LEO XKP-804E is a robust pool circulation pump intended to move water through swimming-pool filtration systems. Its 800 W / 1.1 HP motor provides substantially greater flow capacity than the smaller XKP-350E-2, making it suitable for larger residential pools and higher-flow filtration systems.
LEO/distributor specifications identify the XKP series as self-priming centrifugal pumps with a filter, primarily used for water circulation and filtration in small and medium-sized swimming pools. Other listed applications include water-treatment systems, landscape fountains and light industrial clean-water circulation.
Key Specifications
| Specification | LEO XKP-804E |
|---|---|
| Brand | LEO |
| Model | XKP-804E / XKP804E |
| Product Type | Pool & Spa Circulation Pump |
| Pump Type | Self-Priming Centrifugal Pump |
| Application | Swimming Pool / Spa / Filtration |
| Motor Power | 0.8 kW / 800 W / 1.1 HP |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Flow Range | 25–290 L/min |
| Maximum Flow | 290 L/min |
| Maximum Flow | Approx. 17.4 m³/h |
| Head Range | 11–2 m |
| Maximum Head | 11 m |
| Maximum Suction | 3.5 m |
| Inlet | 2 inch |
| Outlet | 2 inch |
| Pump Body | Engineering Plastic |
| Impeller | Plastic |
| Shaft | AISI 304 Stainless Steel |
| Thermal Protection | Built-in |
| Insulation Class | B in Malaysian distributor specification |
| Protection Class | IPX5 |
| Maximum Liquid Temperature | 35°C in current Malaysian listing |
| Dimensions | Approx. 343 × 162 × 187 mm in distributor specification |
| Weight | Approx. 6.2 kg in distributor specification |
The Malaysian LEO distributor specifications consistently list 220 V, 0.8 kW/1.1 HP, 25–290 L/min, 11–2 m head, 3.5 m maximum suction and 2" × 2" connections.
Some other Malaysian listings give larger package dimensions and approximately 10.8–11 kg shipping/product weight, so dimensions and weight should be checked against the specific packaging/version supplied.
Hydraulic Performance
The XKP-804E has a published hydraulic operating range of:
Flow: 25–290 L/min
Head: 11–2 m
The maximum flow of 290 L/min is equivalent to:
- 17,400 L/h
- 17.4 m³/h
The pump's maximum flow and maximum head cannot be achieved simultaneously. As system resistance increases, available flow decreases.
For example, a pool installation with a restrictive filter, long pipe run, numerous elbows or significant elevation will operate at a lower flow than the 290 L/min maximum.
For proper pump selection, the required flow should therefore be evaluated against the total dynamic head (TDH) of the complete circulation system.
Self-Priming Design
The XKP-804E is a self-priming centrifugal pump, which makes it suitable for surface-mounted swimming-pool installations where the pump may need to draw water from below the pump level.
The published maximum suction height is approximately 3.5 m.
For reliable self-priming operation:
- Keep suction piping as short as practical.
- Use the correct 2-inch suction pipe size.
- Minimise elbows and restrictions.
- Ensure all suction connections are airtight.
- Prime the pump correctly before initial operation.
- Keep the pump basket/filter clean.
- Avoid running the pump dry.
Although the pump has self-priming capability, poor suction-pipe design can significantly reduce performance and cause air ingress or loss of prime.
Integrated Pre-Filter
The XKP-804E incorporates a filter/pre-filter arrangement designed to capture debris before it reaches the pump hydraulic components.
This is particularly useful in swimming-pool applications where water may contain:
- Leaves
- Insects
- Hair
- Small debris
- Suspended particles
The pre-filter should be inspected and cleaned regularly. A blocked basket increases suction-side restriction and can reduce the pump's flow and operating efficiency.
Swimming Pool Filtration
The XKP-804E is designed for water circulation with filtration in small and medium-sized swimming pools.
A typical installation is:
Swimming Pool → Skimmer / Main Drain → Pump Pre-Filter → XKP-804E → Sand/Cartridge Filter → Return Line → Swimming Pool
The pump circulates pool water through the filtration equipment, where suspended contaminants are removed before the filtered water is returned to the pool.
The 2-inch connections provide substantially greater hydraulic capacity than the 1½-inch connections commonly used on smaller pool pumps.
Suitable Pool Applications
The XKP-804E can be considered for:
- Residential swimming pools
- Medium-sized swimming pools
- Spa pools
- Jacuzzi systems
- Pool filtration systems
- Water circulation systems
- Water-treatment systems
- Landscape fountains
- Decorative water features
- Clean-water circulation applications
- Light industrial clean-water applications
LEO distributor information specifically lists small and medium swimming pools, water-treatment systems, landscape fountains and light industries among the applications.
Engineering-Plastic Pump Body
The pump body is constructed from special engineering plastic.
Advantages include:
- Corrosion resistance
- Low weight
- Good resistance to normal treated pool water
- Durable external construction
- Reduced susceptibility to surface corrosion compared with conventional metal housings
The engineering-plastic body is explicitly specified for the XKP-804E.
AISI 304 Stainless-Steel Shaft
The pump uses an AISI 304 stainless-steel shaft. This provides corrosion resistance and is particularly appropriate for pool equipment exposed to treated water and moisture.
The combination of an engineering-plastic pump body and stainless-steel shaft provides a relatively lightweight construction while maintaining suitable durability for pool circulation.
Motor & Electrical Protection
The XKP-804E uses a single-phase 220 V motor rated at 800 W / 1.1 HP.
The motor incorporates a built-in thermal protector, which helps protect the winding against excessive temperature under abnormal operating conditions.
The available Malaysian specifications identify:
- Insulation class: B
- Protection class: IPX5
- Built-in thermal protector
IPX5 means the motor enclosure is protected against water jets from various directions. The motor itself should remain appropriately protected from direct flooding or submersion.
Operating Temperature
Current Malaysian distributor specifications list a maximum liquid temperature of approximately 35°C for the XKP-804E.
Some regional XKP-804E listings instead specify a wider 5–50°C medium-temperature range, indicating that specifications can differ by market or documentation version.
For a product catalogue, 35°C is the more conservative specification for the current Malaysian listing.
2-Inch Connections
The XKP-804E uses:
2" × 2" inlet/outlet
This relatively large connection size is appropriate for its high-flow capability. The larger pipe diameter helps reduce friction losses compared with smaller suction and discharge piping.
Using undersized piping can significantly reduce actual pump performance, especially at high flow rates.
Flow Capacity
At maximum rated flow, the XKP-804E can deliver approximately:
290 L/min = 17,400 L/h = 17.4 m³/h
This high flow capacity makes it suitable for applications requiring substantial pool-water circulation.
However, actual flow will depend on:
- Filter pressure
- Pipe diameter
- Pipe length
- Static elevation
- Number of elbows
- Valves
- Pool return fittings
- Skimmer restrictions
- Overall system resistance
The pump should therefore be sized based on its operating point rather than maximum flow alone.
Advantages
- 800 W / 1.1 HP motor
- 220 V single-phase operation
- Maximum flow of 290 L/min
- Approx. 17.4 m³/h maximum flow
- Maximum head of 11 m
- 25–290 L/min published flow range
- 11–2 m published head range
- 3.5 m maximum suction height
- 2" × 2" inlet/outlet
- Self-priming centrifugal design
- Integrated pre-filter
- Engineering-plastic pump body
- Plastic impeller
- AISI 304 stainless-steel shaft
- Built-in thermal protection
- IPX5 protection
- Suitable for small and medium swimming pools
- Suitable for spa and jacuzzi circulation
- Suitable for pool filtration
- Suitable for water-treatment systems
- Suitable for landscape fountains
- Suitable for clean-water applications
XKP-804E vs XKP-350E-2
| Feature | XKP-804E | XKP-350E-2 |
|---|---|---|
| Motor Power | 800 W / 1.1 HP | 350 W / 0.5 HP |
| Voltage | 220 V | 220 V |
| Max. Flow | 290 L/min | 125–132 L/min |
| Max. Flow | 17.4 m³/h | Approx. 7.5–7.9 m³/h |
| Max. Head | 11 m | 9 m |
| Max. Suction | 3.5 m | 3.5 m |
| Inlet / Outlet | 2" × 2" | 1½" × 1½" |
| Main Application | Small–medium pools | Smaller pools |
| Pump Body | Engineering Plastic | Engineering Plastic |
| Shaft | AISI 304 SS | AISI 304 SS |
| Thermal Protection | Yes | Yes |
| Protection | IPX5 | IPX5 |
The XKP-804E offers approximately double the motor power and substantially greater hydraulic capacity than the XKP-350E-2, making it the more appropriate option where higher pool circulation flow is required.
XKP Series Positioning
The XKP series includes several pool-pump sizes. LEO distributor catalogues list the XKP-804E at 0.8 kW and the larger XKP-1104E at 1.1 kW, with the XKP-1104E providing a higher maximum flow and head.
This makes the XKP-804E a useful mid-range option for installations that require more capacity than the smaller 0.35–0.5 HP pool pumps but do not require the larger 1.1 kW model.
Important Selection Note
The LEO XKP-804E is a swimming-pool circulation and filtration pump, not a sewage or wastewater pump.
For a pool installation, the correct pump size should be determined by the required turnover rate, filter capacity and total dynamic head.
Do not size the system simply from the 290 L/min maximum-flow rating. The actual flow at the installation will be lower once the filter, pipework, valves, fittings and elevation are taken into account.
The 2-inch suction and discharge connections should also be maintained with appropriately sized pipework to avoid unnecessary hydraulic losses.
Technical Product Data
Brand: LEO
Model: XKP-804E / XKP804E
Category: Pool & Spa Pump
Pump Type: Self-Priming Centrifugal Pool Pump with Pre-Filter
Motor Power: 0.8 kW / 800 W / 1.1 HP
Voltage: 220 V
Frequency: 50 Hz
Phase: Single Phase
Flow Range: 25–290 L/min
Maximum Flow: 290 L/min
Maximum Flow: Approx. 17.4 m³/h
Head Range: 11–2 m
Maximum Head: 11 m
Maximum Suction: 3.5 m
Inlet: 2"
Outlet: 2"
Pump Body: Engineering Plastic
Impeller: Plastic
Shaft: AISI 304 Stainless Steel
Thermal Protection: Built-in
Insulation Class: B in Malaysian distributor specification
Protection Class: IPX5
Maximum Liquid Temperature: 35°C in current Malaysian listing
Dimensions: Approx. 343 × 162 × 187 mm
Weight: Approx. 6.2 kg
Applications: Swimming pools, spas, filtration systems, water treatment, landscape fountains and clean-water circulation.
Inquiry - LEO POOL & SPA PUMPS - XKP-804E